[PATCH 25/34] arm64: dts: qcom: sdm845: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys and phy-names from the controller to
pcie0_port0 and pcie1_port0, adding labels to these nodes to allow
board-level overrides. Move perst-gpios/wake-gpios from the
controller overrides to the respective port nodes in the board files,
renaming perst-gpios to reset-gpios to match the binding used in the
root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 13 +++++++++----
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts    | 12 ++++++++----
 arch/arm64/boot/dts/qcom/sdm845.dtsi       | 14 ++++++--------
 3 files changed, 23 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 3e636926231d..27a0b90d2b7a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -618,15 +618,17 @@ &mss_pil {
 
 &pcie0 {
 	status = "okay";
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 134 GPIO_ACTIVE_LOW>;
-
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_state>;
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	status = "okay";
 
@@ -636,12 +638,15 @@ &pcie0_phy {
 
 &pcie1 {
 	status = "okay";
-	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index c66df45eee64..0080000a1839 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -508,14 +508,16 @@ &mss_pil {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l26a_1p2>;
@@ -524,14 +526,16 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b1f6782a3ad9..cb7f93b02b5a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2395,16 +2395,15 @@ pcie0: pcie@1c00000 {
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
 			status = "disabled";
 
-			pcie@0 {
+			pcie0_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie0_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
@@ -2525,16 +2524,15 @@ pcie1: pcie@1c08000 {
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie1_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

-- 
2.34.1