[PATCH 34/34] arm64: dts: qcom: sm8550: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys and phy-names from the controller to
the existing pcieport0 and newly labeled pcie1_port0, allowing
board-level overrides. Move perst-gpios/wake-gpios from the
controller overrides to the respective port nodes in the board files,
renaming perst-gpios to reset-gpios to match the binding used in the
root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi             | 16 ++++++++++------
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts                  | 14 ++++++++------
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts                  | 16 ++++++++++------
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts                  |  6 +++---
 arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts          |  7 +++++--
 .../boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts     |  8 +++++---
 arch/arm64/boot/dts/qcom/sm8550.dtsi                     | 10 ++++------
 7 files changed, 45 insertions(+), 32 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index aaf5eb57ce23..b271c2056e83 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -335,26 +335,30 @@ &mdss_dsi0_phy {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p9>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 4777c908c4d7..c76ad7d17466 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -1087,9 +1087,6 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -1097,6 +1094,9 @@ &pcie0 {
 };
 
 &pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
@@ -1121,15 +1121,17 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p9>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index eb1de33e5ba5..63d7e4da66d8 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -739,15 +739,17 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_state>;
 
 	status = "okay";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
@@ -756,15 +758,17 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p91>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 13cdb5b0ce40..18c258f3cafc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -987,9 +987,6 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -997,6 +994,9 @@ &pcie0 {
 };
 
 &pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index cf4e4e9d9e26..8c4182719067 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -510,13 +510,16 @@ &i2c_master_hub_0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 	status = "okay";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index 9f347bea6c74..9d08993b8bc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -584,15 +584,17 @@ cirrus,gpio-ctrl2 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie0_port0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&pm8550vs_2_l1>;
 	vdda-pll-supply = <&pm8550vs_2_l3>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 0e701e709235..9bbc31346f90 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2397,9 +2397,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
 			operating-points-v2 = <&pcie0_opp_table>;
 
 			status = "disabled";
@@ -2461,6 +2458,8 @@ pcie0_port0: pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie0_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
@@ -2583,9 +2582,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			operating-points-v2 = <&pcie1_opp_table>;
 
 			status = "disabled";
@@ -2663,6 +2659,8 @@ pcie1_port0: pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie1_phy>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

-- 
2.34.1