[PATCH 08/34] arm64: dts: qcom: sm8450: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b8793482b181..7bc5f85e7ebc 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2021,7 +2021,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -2186,7 +2186,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;

-- 
2.34.1