All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Farman <farman@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, Matthew Rosato <mjrosato@linux.ibm.com>,
	Cornelia Huck <cohuck@redhat.com>,
	Harald Freudenberger <freude@linux.ibm.com>,
	Eric Farman <farman@linux.ibm.com>
Subject: [PULL 06/33] target/s390x: Adjust addressing mode checks for sha512 and sha256
Date: Mon, 21 Sep 2026 16:08:03 -0400	[thread overview]
Message-ID: <20260921200830.1302919-7-farman@linux.ibm.com> (raw)
In-Reply-To: <20260921200830.1302919-1-farman@linux.ibm.com>

From: Harald Freudenberger <freude@linux.ibm.com>

The handling for different addressing modes in the both sha
implementations cpacf sha256 and sha512 was incomplete. Rework this
addressing checking to clearly have support for s390 64 bit and 32 bit
addressing mode but raise an exception otherwise.

Also bail out early (for KIMD only) if length is 0.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20260824083204.40877-7-freude@linux.ibm.com
Signed-off-by: Eric Farman <farman@linux.ibm.com>
---
 target/s390x/tcg/cpacf_sha256.c | 16 +++++++++++++---
 target/s390x/tcg/cpacf_sha512.c | 16 +++++++++++++---
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/target/s390x/tcg/cpacf_sha256.c b/target/s390x/tcg/cpacf_sha256.c
index 67321b565c..de305b6838 100644
--- a/target/s390x/tcg/cpacf_sha256.c
+++ b/target/s390x/tcg/cpacf_sha256.c
@@ -111,14 +111,24 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra,
 {
     enum { MAX_BLOCKS_PER_RUN = 128 }; /* 128 * 64 = 8K */
     uint64_t len = *len_reg, processed = 0;
-    int message_reg_len = 64;
+    int message_reg_len;
     uint32_t a[8];
 
     g_assert(type == S390_FEAT_TYPE_KIMD || type == S390_FEAT_TYPE_KLMD);
 
-    if (!(env->psw.mask & PSW_MASK_64)) {
+    /* check addressing mode, raise exception if not supported here */
+    if (env->psw.mask & PSW_MASK_64) {
+        message_reg_len = 64;
+    } else if (env->psw.mask & PSW_MASK_32) {
+        message_reg_len = 32;
         len = (uint32_t)len;
-        message_reg_len = (env->psw.mask & PSW_MASK_32) ? 32 : 24;
+    } else {
+        tcg_s390_program_interrupt(env, PGM_SPECIFICATION, ra);
+    }
+
+    /* for KIMD only: early bail out if length is zero */
+    if (type == S390_FEAT_TYPE_KIMD && !len) {
+        return 0;
     }
 
     /* KIMD: length has to be properly aligned. */
diff --git a/target/s390x/tcg/cpacf_sha512.c b/target/s390x/tcg/cpacf_sha512.c
index edd8dae78f..cad8e0e1bd 100644
--- a/target/s390x/tcg/cpacf_sha512.c
+++ b/target/s390x/tcg/cpacf_sha512.c
@@ -126,13 +126,23 @@ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra,
 {
     enum { MAX_BLOCKS_PER_RUN = 64 }; /* Arbitrary: keep interactivity. */
     uint64_t len = *len_reg, a[8], processed = 0;
-    int message_reg_len = 64;
+    int message_reg_len;
 
     g_assert(type == S390_FEAT_TYPE_KIMD || type == S390_FEAT_TYPE_KLMD);
 
-    if (!(env->psw.mask & PSW_MASK_64)) {
+    /* check addressing mode, raise exception if not supported here */
+    if (env->psw.mask & PSW_MASK_64) {
+        message_reg_len = 64;
+    } else if (env->psw.mask & PSW_MASK_32) {
+        message_reg_len = 32;
         len = (uint32_t)len;
-        message_reg_len = (env->psw.mask & PSW_MASK_32) ? 32 : 24;
+    } else {
+        tcg_s390_program_interrupt(env, PGM_SPECIFICATION, ra);
+    }
+
+    /* for KIMD only: early bail out if length is zero */
+    if (type == S390_FEAT_TYPE_KIMD && !len) {
+        return 0;
     }
 
     /* KIMD: length has to be properly aligned. */
-- 
2.55.0



  parent reply	other threads:[~2026-09-21 20:12 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-21 20:07 [PULL 00/33] s390x queue for 11.2 Eric Farman
2026-09-21 20:07 ` [PULL 01/33] target/s390x: Fix missing privileged flag at PCKMO instruction Eric Farman
2026-09-21 20:07 ` [PULL 02/33] target/s390x: Rework s390 cpacf implementations Eric Farman
2026-09-21 20:08 ` [PULL 03/33] target/s390x: Move cpacf sha512 code into a new file Eric Farman
2026-09-21 20:08 ` [PULL 04/33] target/s390x: Support cpacf sha256 Eric Farman
2026-09-21 20:08 ` [PULL 05/33] target/s390x: Add helper functions for copy memory to and from guest Eric Farman
2026-09-21 20:08 ` Eric Farman [this message]
2026-09-21 20:08 ` [PULL 07/33] crypto: Add aes-helpers file to support some AES modes Eric Farman
2026-09-21 20:08 ` [PULL 08/33] target/s390x: Support AES ECB for cpacf km instruction Eric Farman
2026-09-21 20:08 ` [PULL 09/33] target/s390x: Support AES CBC for cpacf kmc instruction Eric Farman
2026-09-21 20:08 ` [PULL 10/33] target/s390x: Support AES CTR for cpacf kmctr instruction Eric Farman
2026-09-21 20:08 ` [PULL 11/33] target/s390x: Minimal AES XTS support for cpacf pcc instruction Eric Farman
2026-09-21 20:08 ` [PULL 12/33] target/s390x: Support AES XTS for cpacf km instruction Eric Farman
2026-09-21 20:08 ` [PULL 13/33] target/s390x: Base support for cpacf protected keys and pckmo Eric Farman
2026-09-21 20:08 ` [PULL 14/33] target/s390x: Support protected key AES ECB for cpacf km instruction Eric Farman
2026-09-21 20:08 ` [PULL 15/33] target/s390x: Support protected key AES CBC for cpacf kmc instruction Eric Farman
2026-09-21 20:08 ` [PULL 16/33] target/s390x: Support protected key AES CTR for cpacf kmctr instruction Eric Farman
2026-09-21 20:08 ` [PULL 17/33] target/s390x: Minimal protected key AES XTS support for cpacf pcc instruction Eric Farman
2026-09-21 20:08 ` [PULL 18/33] target/s390x: Support protected key AES XTS for cpacf km instruction Eric Farman
2026-09-21 20:08 ` [PULL 19/33] docs/s390: Document CPACF instructions support Eric Farman
2026-09-21 20:08 ` [PULL 20/33] tests/tcg/s390x: Add tests for CPACF instructions Eric Farman
2026-09-21 20:08 ` [PULL 21/33] hw/s390x/ipl: Add secure boot support to PCI dev IPLB builder Eric Farman
2026-09-21 20:08 ` [PULL 22/33] tests/functional/s390x/test_secure_ipl: Skip test if SIPL not supported by hypervisor Eric Farman
2026-09-21 20:08 ` [PULL 23/33] tests/functional/s390x/test_secure_ipl: Add virtio-blk-pci boot dev case Eric Farman
2026-09-21 20:08 ` [PULL 24/33] pc-bios/s390-ccw: Check if a PCI function is already enabled before trying to enable it Eric Farman
2026-09-21 20:08 ` [PULL 25/33] hw/s390x/ipl: Fix incorrect PCI IPL block lengths Eric Farman
2026-09-21 20:08 ` [PULL 26/33] pc-bios/s390-ccw: Use bus specific IPL_TYPE directly for scsi IPL Eric Farman
2026-09-21 20:08 ` [PULL 27/33] s390x/ipl: Add PCI and bus fields to IplBlockQemuScsi Eric Farman
2026-09-21 20:08 ` [PULL 28/33] pc-bios/s390-ccw: Abstract virtio_run() for generic use Eric Farman
2026-09-21 20:08 ` [PULL 29/33] pc-bios/s390-ccw: Add support for virtio-scsi-pci IPL Eric Farman
2026-09-21 20:08 ` [PULL 30/33] s390x: Find scsi-pci boot device and build IPLB Eric Farman
2026-09-21 20:08 ` [PULL 31/33] tests/qtest: Add s390x PCI SCSI fallback test to cdrom-test.c Eric Farman
2026-09-21 20:08 ` [PULL 32/33] s390x/pci: fix DMA slot leak on I/O TLB entry replacement Eric Farman
2026-09-21 20:08 ` [PULL 33/33] pc-bios/s390-ccw.img: update s390x bios Eric Farman
2026-09-22  5:32 ` [PULL 00/33] s390x queue for 11.2 Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260921200830.1302919-7-farman@linux.ibm.com \
    --to=farman@linux.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=freude@linux.ibm.com \
    --cc=mjrosato@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.