[PATCH 4/5] arm64: dts: st: Drop sdmmc1_*_pins_b pinmux

[Marek Vasut <marex@nabladev.com>]

The sdmmc1_*_pins_b pinmux nodes are unused, drop them.

Fixes: e2fce4620933 ("arm64: dts: st: Add pinmux nodes for DH electronics STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board")
Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Bartosz Golaszewski <brgl@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 45 -------------------
 1 file changed, 45 deletions(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 674d30dac4d09..56c2c99a05d4d 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -675,26 +675,6 @@ pins2 {
 		};
 	};
 
-	/omit-if-no-ref/
-	sdmmc1_b4_pins_b: sdmmc1-b4-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('E', 1, AF10)>, /* SDMMC1_D3 */
-				 <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
 	/omit-if-no-ref/
 	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
 		pins1 {
@@ -720,31 +700,6 @@ pins3 {
 		};
 	};
 
-	/omit-if-no-ref/
-	sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('E', 1, AF10)>; /* SDMMC1_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-disable;
-		};
-	};
-
 	/omit-if-no-ref/
 	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
 		pins {
-- 
2.53.0