[PATCH 5/5] arm64: dts: st: Do not encode path in sdmmc2_*_pins_a/pins2 phandle

[Marek Vasut <marex@nabladev.com>]

Do not encode node path in phandles, describe subnodes instead.
This is only a consistency change, no functional change.

Fixes: 9b584c92f94f ("arm64: dts: st: Add support for DH electronics STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board and DHSBC")
Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Bartosz Golaszewski <brgl@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 .../arm64/boot/dts/st/stm32mp2xxx-dhcos-som.dtsi | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp2xxx-dhcos-som.dtsi b/arch/arm64/boot/dts/st/stm32mp2xxx-dhcos-som.dtsi
index 80d829c55d9d8..bcf63e2ea9898 100644
--- a/arch/arm64/boot/dts/st/stm32mp2xxx-dhcos-som.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp2xxx-dhcos-som.dtsi
@@ -389,14 +389,18 @@ &scmi_vddio4 {
 	regulator-always-on;
 };
 
-&{sdmmc2_b4_pins_a/pins2} {
-	/delete-property/ bias-disable;
-	bias-pull-up;
+&sdmmc2_b4_pins_a {
+	pins2 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
 };
 
-&{sdmmc2_b4_od_pins_a/pins2} {
-	/delete-property/ bias-disable;
-	bias-pull-up;
+&sdmmc2_b4_od_pins_a {
+	pins2 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
 };
 
 &sdmmc2 {
-- 
2.53.0