[PATCH v4 1/9] EDAC/aspeed: Set the DIMM grain

[Ryan Chen <ryan_chen@aspeedtech.com>]

dimm->grain is never set, so every error is reported with a granularity
of zero, which edac_raw_mc_handle_error() warns about and substitutes
with 1.

The controller records the address of a failing access with 16-byte
granularity: MCR58 and MCR5C hold it in bits [30:4], with the low four
bits reserved. Set the grain to 16 accordingly.

Fixes: 9b7e6242ee4e ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>

---
Changes in v4:
- Explain where the grain value comes from rather than the warning it
  silences.
- Drop the Cc: stable tag.
---
 drivers/edac/aspeed_edac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/edac/aspeed_edac.c b/drivers/edac/aspeed_edac.c
index 6e069b255595..83d60414f89a 100644
--- a/drivers/edac/aspeed_edac.c
+++ b/drivers/edac/aspeed_edac.c
@@ -266,6 +266,7 @@ static int init_csrows(struct mem_ctl_info *mci)
 	dimm->mtype = dram_type;
 	dimm->edac_mode = EDAC_SECDED;
 	dimm->nr_pages = nr_pages / csrow->nr_channels;
+	dimm->grain = 16;
 
 	dev_dbg(mci->pdev, "initialized dimm with first_page=0x%lx and nr_pages=0x%x\n",
 		csrow->first_page, nr_pages);

-- 
2.34.1