From: Bradley Morgan <brads@mainlining.org>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.u-boot-project.org
Cc: "Bradley Morgan" <brads@mainlining.org>,
"Marek Behún" <kabel@kernel.org>,
"Marek Mojík" <marek.mojik@nic.cz>,
"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>,
"Alexey Charkov" <alchark@flipper.net>,
"Anshul Dalal" <anshuld@ti.com>,
"Daniel Golle" <daniel@makrotopia.org>,
"Fabio Estevam" <festevam@gmail.com>,
"Gaurav Jain" <gaurav.jain@nxp.com>,
"Ilias Apalodimas" <ilias.apalodimas@linaro.org>,
"Jaehoon Chung" <jh80.chung@samsung.com>,
"James Hilliard" <james.hilliard1@gmail.com>,
"Jerome Forissier" <jerome.forissier@arm.com>,
"Johan Jonker" <jbx6244@gmail.com>,
"Lukasz Majewski" <lukma@nabladev.com>,
"Marek Vasut" <marek.vasut+usb@mailbox.org>,
"Mario Six" <mario.six@gdsys.cc>,
"Michael Walle" <mwalle@kernel.org>,
"Michal Simek" <michal.simek@amd.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Peng Fan" <peng.fan@nxp.com>, "Pengpeng Hou" <hppiscas@163.com>,
"Priyanka Jain" <priyanka.jain@nxp.com>,
"Quentin Schulz" <quentin.schulz@cherry.de>,
"Simon Glass" <sjg@chromium.org>,
"Stefano Babic" <sbabic@nabladev.com>,
"Tanmay Kathpalia" <tanmay.kathpalia@altera.com>,
"Torsten Rupp" <torsten.rupp@8tronix.de>,
"Vincent Jardin" <vjardin@free.fr>,
"Weijie Gao" <weijie.gao@mediatek.com>
Subject: [PATCH 18/26] powerpc: mpc85xx: Remove MPC8560 support
Date: Fri, 9 Oct 2026 19:36:56 +0000 [thread overview]
Message-ID: <20261009193704.13061-19-brads@mainlining.org> (raw)
In-Reply-To: <20261009193704.13061-1-brads@mainlining.org>
NXP lists MPC8560 as no longer manufactured, and no board in the tree selects
ARCH_MPC8560. Remove the unused architecture configuration, reset and
clock handling, and CPU identification.
Signed-off-by: Bradley Morgan <brads@mainlining.org>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 9 +--------
arch/powerpc/cpu/mpc85xx/cpu.c | 17 -----------------
arch/powerpc/cpu/mpc85xx/cpu_init.c | 6 ++----
arch/powerpc/cpu/mpc85xx/fdt.c | 6 ++----
arch/powerpc/cpu/mpc85xx/speed.c | 4 +---
arch/powerpc/cpu/mpc8xxx/cpu.c | 1 -
arch/powerpc/include/asm/fsl_lbc.h | 2 +-
arch/powerpc/include/asm/immap_85xx.h | 4 ----
arch/powerpc/include/asm/processor.h | 1 -
9 files changed, 7 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 2d405501c57..bcdeef59fe7 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -335,11 +335,6 @@ config ARCH_MPC8544
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
-config ARCH_MPC8560
- bool
- select FSL_LAW
- select SYS_FSL_HAS_DDR1
-
config ARCH_P1010
bool
select A003399_NOR_WORKAROUND if SYS_FSL_ERRATUM_IFC_A003399 && !SPL
@@ -756,7 +751,6 @@ config SYS_CCSRBAR_DEFAULT
default 0xff700000 if ARCH_BSC9131 || \
ARCH_BSC9132 || \
ARCH_MPC8544 || \
- ARCH_MPC8560 || \
ARCH_P1010 || \
ARCH_P1020 || \
ARCH_P1021 || \
@@ -969,7 +963,6 @@ config SYS_FSL_NUM_LAWS
ARCH_P1024 || \
ARCH_P2020
default 10 if ARCH_MPC8544
- default 8 if ARCH_MPC8560
help
Number of local access windows. This is fixed per SoC.
If not sure, do not change.
@@ -1104,7 +1097,7 @@ config SYS_FSL_IFC_CLK_DIV
config SYS_FSL_LBC_CLK_DIV
int "Divider of platform clock"
- depends on FSL_ELBC || ARCH_MPC8560
+ depends on FSL_ELBC
default 2 if ARCH_P2041
default 1
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index c33250faac6..b4e9f6aac66 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -301,22 +301,6 @@ int checkcpu (void)
int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
-/* Everything after the first generation of PQ3 parts has RSTCR */
-#if defined(CONFIG_ARCH_MPC8560)
- unsigned long val, msr;
-
- /*
- * Initiate hard reset in debug control register DBCR0
- * Make sure MSR[DE] = 1. This only resets the core.
- */
- msr = mfmsr ();
- msr |= MSR_DE;
- mtmsr (msr);
-
- val = mfspr(DBCR0);
- val |= 0x70000000;
- mtspr(DBCR0,val);
-#else
volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
/* Call board-specific preparation for reset */
@@ -331,7 +315,6 @@ int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
/* Attempt last-stage board-specific reset */
board_reset_last();
-#endif
return 1;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index c6923a797f9..7970c296e5a 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -546,8 +546,7 @@ int l2cache_init(void)
return -1;
break;
case 0x1:
- if (ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8555) {
+ if (ver == SVR_8541 || ver == SVR_8555) {
puts("128 KiB ");
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
cache_ctl = 0xc4000000;
@@ -557,8 +556,7 @@ int l2cache_init(void)
}
break;
case 0x2:
- if (ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8555) {
+ if (ver == SVR_8541 || ver == SVR_8555) {
puts("256 KiB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
cache_ctl = 0xc8000000;
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index e115c19cf8d..e7d1d9473d2 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -229,15 +229,13 @@ static inline u32 l2cache_size(void)
case 0x0:
break;
case 0x1:
- if (ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8555)
+ if (ver == SVR_8541 || ver == SVR_8555)
return 128;
else
return 256;
break;
case 0x2:
- if (ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8555)
+ if (ver == SVR_8541 || ver == SVR_8555)
return 256;
else
return 512;
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 8e9808953dc..ed4ae33e6a8 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -593,9 +593,7 @@ int get_clocks(void)
* for that SOC. This information is taken from application note
* AN2919.
*/
-#if defined(CONFIG_ARCH_MPC8560)
- gd->arch.i2c1_clk = sys_info.freq_systembus;
-#elif defined(CONFIG_ARCH_MPC8544)
+#if defined(CONFIG_ARCH_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 8d652e36d17..3594c1e3de2 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -33,7 +33,6 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(8547, 8547, 1),
CPU_TYPE_ENTRY(8548, 8548, 1),
CPU_TYPE_ENTRY(8555, 8555, 1),
- CPU_TYPE_ENTRY(8560, 8560, 1),
CPU_TYPE_ENTRY(8567, 8567, 1),
CPU_TYPE_ENTRY(8568, 8568, 1),
CPU_TYPE_ENTRY(8569, 8569, 1),
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index d98673c40b3..9efb6ae6cd0 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -321,7 +321,7 @@ void lbc_sdram_init(void);
*/
#define LCRR_CLKDIV 0x0000001F
#define LCRR_CLKDIV_SHIFT 0
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_ARCH_MPC8560)
+#if defined(CONFIG_MPC83xx)
#define LCRR_CLKDIV_2 0x00000002
#define LCRR_CLKDIV_4 0x00000004
#define LCRR_CLKDIV_8 0x00000008
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4479ef813c8..b646d24bc6b 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -123,10 +123,6 @@ typedef struct ccsr_i2c {
u8 res[4096 - 1 * sizeof(struct fsl_i2c_base)];
} ccsr_i2c_t;
-typedef struct ccsr_duart {
- u8 res[4096];
-} ccsr_duart_t;
-
/* eSPI Registers */
typedef struct ccsr_espi {
u32 mode; /* eSPI mode */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 77414c05aba..b78a726445d 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1021,7 +1021,6 @@
#define SVR_8547 0x803101
#define SVR_8548 0x803100
#define SVR_8555 0x807100
-#define SVR_8560 0x807000
#define SVR_8567 0x807501
#define SVR_8568 0x807500
#define SVR_8569 0x808000
--
2.47.3
next prev parent reply other threads:[~2026-10-09 19:54 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 19:36 [PATCH 00/26] powerpc: drop EOL boards and SoCs, take over maintenance Bradley Morgan
2026-10-09 19:36 ` [PATCH 01/26] board: powerpc: Remove MPC8548CDS support Bradley Morgan
2026-10-09 21:55 ` Tom Rini
2026-10-10 10:51 ` Łukasz Majewski
2026-10-10 10:58 ` Bradley Morgan
2026-10-09 19:36 ` [PATCH 02/26] board: powerpc: Remove MPC837XERDB support Bradley Morgan
2026-10-09 20:18 ` Bradley Morgan
2026-10-09 19:36 ` [PATCH 03/26] board: powerpc: Remove P2020RDB-PC support Bradley Morgan
2026-10-09 19:36 ` [PATCH 04/26] board: powerpc: Remove P3041DS support Bradley Morgan
2026-10-09 19:36 ` [PATCH 05/26] board: powerpc: Remove P4080DS support Bradley Morgan
2026-10-09 19:36 ` [PATCH 06/26] board: powerpc: Remove P5040DS support Bradley Morgan
2026-10-09 19:36 ` [PATCH 07/26] board: powerpc: Remove T1042D4RDB support Bradley Morgan
2026-10-09 19:36 ` [PATCH 08/26] powerpc: mpc85xx: Remove P3041 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 09/26] powerpc: mpc85xx: Remove P4080 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 10/26] powerpc: mpc85xx: Remove P5040 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 11/26] powerpc: mpc83xx: Remove MPC837x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 12/26] powerpc: mpc85xx: Remove C29x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 13/26] powerpc: mpc85xx: Remove P1011 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 14/26] powerpc: mpc85xx: Remove P1023 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 15/26] powerpc: mpc85xx: Remove P1025 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 16/26] powerpc: mpc85xx: Remove MPC8536 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 17/26] powerpc: mpc85xx: Remove MPC8540 support Bradley Morgan
2026-10-09 19:36 ` Bradley Morgan [this message]
2026-10-09 19:36 ` [PATCH 19/26] powerpc: mpc85xx: Remove BSC9132 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 20/26] powerpc: mpc83xx: Remove MPC831x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 21/26] powerpc: mpc83xx: Remove MPC834x support Bradley Morgan
2026-10-09 19:37 ` [PATCH 22/26] powerpc: mpc85xx: Remove P1024 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 23/26] powerpc: mpc85xx: Remove BSC9131 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 24/26] powerpc: mpc83xx: Remove MPC8309 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 25/26] powerpc: Remove MPC86xx support Bradley Morgan
2026-10-09 19:37 ` [PATCH 26/26] MAINTAINERS: powerpc: Add me as PowerPC maintainer Bradley Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261009193704.13061-19-brads@mainlining.org \
--to=brads@mainlining.org \
--cc=alchark@flipper.net \
--cc=anshuld@ti.com \
--cc=daniel@makrotopia.org \
--cc=festevam@gmail.com \
--cc=gaurav.jain@nxp.com \
--cc=hppiscas@163.com \
--cc=ilias.apalodimas@linaro.org \
--cc=james.hilliard1@gmail.com \
--cc=jbx6244@gmail.com \
--cc=jerome.forissier@arm.com \
--cc=jh80.chung@samsung.com \
--cc=kabel@kernel.org \
--cc=lukma@nabladev.com \
--cc=marek.mojik@nic.cz \
--cc=marek.vasut+usb@mailbox.org \
--cc=mario.six@gdsys.cc \
--cc=michal.simek@amd.com \
--cc=mwalle@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=peng.fan@nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=quentin.schulz@cherry.de \
--cc=sbabic@nabladev.com \
--cc=sjg@chromium.org \
--cc=tanmay.kathpalia@altera.com \
--cc=torsten.rupp@8tronix.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
--cc=uboot-imx@nxp.com \
--cc=vjardin@free.fr \
--cc=weijie.gao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.