All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bradley Morgan <brads@mainlining.org>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.u-boot-project.org
Cc: "Bradley Morgan" <brads@mainlining.org>,
	"Marek Behún" <kabel@kernel.org>,
	"Marek Mojík" <marek.mojik@nic.cz>,
	"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>,
	"Alexey Charkov" <alchark@flipper.net>,
	"Anshul Dalal" <anshuld@ti.com>,
	"Daniel Golle" <daniel@makrotopia.org>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Gaurav Jain" <gaurav.jain@nxp.com>,
	"Ilias Apalodimas" <ilias.apalodimas@linaro.org>,
	"Jaehoon Chung" <jh80.chung@samsung.com>,
	"James Hilliard" <james.hilliard1@gmail.com>,
	"Jerome Forissier" <jerome.forissier@arm.com>,
	"Johan Jonker" <jbx6244@gmail.com>,
	"Lukasz Majewski" <lukma@nabladev.com>,
	"Marek Vasut" <marek.vasut+usb@mailbox.org>,
	"Mario Six" <mario.six@gdsys.cc>,
	"Michael Walle" <mwalle@kernel.org>,
	"Michal Simek" <michal.simek@amd.com>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Peng Fan" <peng.fan@nxp.com>, "Pengpeng Hou" <hppiscas@163.com>,
	"Priyanka Jain" <priyanka.jain@nxp.com>,
	"Quentin Schulz" <quentin.schulz@cherry.de>,
	"Simon Glass" <sjg@chromium.org>,
	"Stefano Babic" <sbabic@nabladev.com>,
	"Tanmay Kathpalia" <tanmay.kathpalia@altera.com>,
	"Torsten Rupp" <torsten.rupp@8tronix.de>,
	"Vincent Jardin" <vjardin@free.fr>,
	"Weijie Gao" <weijie.gao@mediatek.com>
Subject: [PATCH 04/26] board: powerpc: Remove P3041DS support
Date: Fri,  9 Oct 2026 19:36:42 +0000	[thread overview]
Message-ID: <20261009193704.13061-5-brads@mainlining.org> (raw)
In-Reply-To: <20261009193704.13061-1-brads@mainlining.org>

NXP marks the P3041 development system no longer manufactured. Drop its target and device tree.

Signed-off-by: Bradley Morgan <brads@mainlining.org>
---
 arch/powerpc/cpu/mpc85xx/Kconfig   |   9 --
 arch/powerpc/dts/Makefile          |   1 -
 arch/powerpc/dts/p3041.dtsi        | 149 ---------------------------
 arch/powerpc/dts/p3041ds.dts       | 158 -----------------------------
 arch/powerpc/dts/p3041si-post.dtsi |  43 --------
 board/nxp/common/Makefile          |   2 -
 6 files changed, 362 deletions(-)
 delete mode 100644 arch/powerpc/dts/p3041.dtsi
 delete mode 100644 arch/powerpc/dts/p3041ds.dts
 delete mode 100644 arch/powerpc/dts/p3041si-post.dtsi

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 7e885014ebe..65081b5bd63 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -87,15 +87,6 @@ config TARGET_SOCRATES
 	select ARCH_MPC8544
 	select BINMAN
 
-config TARGET_P3041DS
-	bool "Support P3041DS"
-	select PHYS_64BIT
-	select ARCH_P3041
-	select BOARD_LATE_INIT if CHAIN_OF_TRUST
-	select FSL_NGPIXIS
-	imply SATA
-	imply PANIC_HANG
-
 config TARGET_P4080DS
 	bool "Support P4080DS"
 	select PHYS_64BIT
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index e44d49cabdf..c603369e7cc 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -11,7 +11,6 @@ dtb-$(CONFIG_TARGET_P1010RDB_PA) += p1010rdb-pa.dtb p1010rdb-pa_36b.dtb
 dtb-$(CONFIG_TARGET_P1010RDB_PB) += p1010rdb-pb.dtb p1010rdb-pb_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
-dtb-$(CONFIG_TARGET_P3041DS) += p3041ds.dtb
 dtb-$(CONFIG_TARGET_P4080DS) += p4080ds.dtb
 dtb-$(CONFIG_TARGET_P5040DS) += p5040ds.dtb
 dtb-$(CONFIG_TARGET_SOCRATES) += socrates.dtb
diff --git a/arch/powerpc/dts/p3041.dtsi b/arch/powerpc/dts/p3041.dtsi
deleted file mode 100644
index e34117b65a0..00000000000
--- a/arch/powerpc/dts/p3041.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * P3041 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2010 - 2015 Freescale Semiconductor Inc.
- * Copyright 2019-2020 NXP
- */
-
-/dts-v1/;
-
-/include/ "e500mc_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P3041";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			fsl,portid-mapping = <0x10000000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-			clock-frequency = <0x0>;
-		};
-
-		espi0: spi@110000 {
-			compatible = "fsl,mpc8536-espi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x110000 0x1000>;
-			fsl,espi-num-chipselects = <4>;
-			status = "disabled";
-		};
-
-		usb0: usb@fe210000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			phy_type = "utmi";
-		};
-
-		usb1: usb@fe211000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			phy_type = "utmi";
-		};
-
-		sata: sata@220000 {
-			compatible = "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-			sata-offset = <0x1000>;
-			sata-number = <2>;
-			sata-fpdma = <0>;
-		};
-
-		esdhc: esdhc@114000 {
-			compatible = "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			clock-frequency = <0>;
-		};
-		/include/ "qoriq-i2c-0.dtsi"
-		/include/ "qoriq-i2c-1.dtsi"
-	};
-
-	pcie@ffe200000 {
-		compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
-		reg = <0xf 0xfe200000 0x0 0x1000>;   /* registers */
-		law_trgt_if = <0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x0 0xff>;
-		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000   /* downstream I/O */
-			  0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000>; /* non-prefetchable memory */
-	};
-
-	pcie@ffe201000 {
-		compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
-		reg = <0xf 0xfe201000 0x0 0x1000>;   /* registers */
-		law_trgt_if = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x0 0xff>;
-		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000   /* downstream I/O */
-			  0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000>; /* non-prefetchable memory */
-	};
-
-	pcie@ffe202000 {
-		compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
-		reg = <0xf 0xfe202000 0x0 0x1000>;   /* registers */
-		law_trgt_if = <2>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x0 0xff>;
-		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000   /* downstream I/O */
-			  0x02000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000>; /* non-prefetchable memory */
-	};
-
-	pcie@ffe203000 {
-		compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
-		reg = <0xf 0xfe203000 0x0 0x1000>;   /* registers */
-		law_trgt_if = <3>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x0 0xff>;
-		ranges = <0x01000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000   /* downstream I/O */
-			  0x02000000 0x0 0xe0000000 0xc 0x60000000 0x0 0x20000000>; /* non-prefetchable memory */
-	};
-};
diff --git a/arch/powerpc/dts/p3041ds.dts b/arch/powerpc/dts/p3041ds.dts
deleted file mode 100644
index 069dae3b85b..00000000000
--- a/arch/powerpc/dts/p3041ds.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * P3041DS Device Tree Source
- *
- * Copyright 2010 - 2015 Freescale Semiconductor Inc.
- * Copyright 2019-2020 NXP
- */
-
-/include/ "p3041.dtsi"
-
-/ {
-	model = "fsl,P3041DS";
-	compatible = "fsl,P3041DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases{
-		phy_rgmii_0 = &phy_rgmii_0;
-		phy_rgmii_1 = &phy_rgmii_1;
-		phy_sgmii_1c = &phy_sgmii_1c;
-		phy_sgmii_1d = &phy_sgmii_1d;
-		phy_sgmii_1e = &phy_sgmii_1e;
-		phy_sgmii_1f = &phy_sgmii_1f;
-		phy_xgmii_1 = &phy_xgmii_1;
-		phy_xgmii_2 = &phy_xgmii_2;
-		emi1_rgmii = &hydra_mdio_rgmii;
-		emi1_sgmii = &hydra_mdio_sgmii;
-		emi2_xgmii = &hydra_mdio_xgmii;
-		spi0 = &espi0;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		fman@400000{
-			ethernet@e0000 {
-				phy-handle = <&phy_sgmii_1c>;
-				phy-connection-type = "sgmii";
-			};
-
-			ethernet@e2000 {
-				phy-handle = <&phy_sgmii_1d>;
-				phy-connection-type = "sgmii";
-			};
-
-			ethernet@e4000 {
-				phy-handle = <&phy_sgmii_1e>;
-				phy-connection-type = "sgmii";
-			};
-
-			ethernet@e6000 {
-				phy-handle = <&phy_sgmii_1f>;
-				phy-connection-type = "sgmii";
-			};
-
-			ethernet@e8000 {
-				phy-handle = <&phy_rgmii_1>;
-				phy-connection-type = "rgmii";
-			};
-
-			ethernet@f0000 {
-				phy-handle = <&phy_xgmii_1>;
-				phy-connection-type = "xgmii";
-			};
-
-			hydra_mdio_xgmii: mdio@f1000 {
-				status = "disabled";
-
-				phy_xgmii_1: ethernet-phy@4 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <0x4>;
-				};
-
-				phy_xgmii_2: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <0x0>;
-				};
-			};
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xffa00000 0x00040000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		board-control@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-			ranges = <0 3 0 0x30>;
-
-			mdio-mux-emi1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "mdio-mux-mmioreg", "mdio-mux";
-				mdio-parent-bus = <&mdio0>;
-				reg = <9 1>;
-				mux-mask = <0x78>;
-
-				hydra_mdio_rgmii: rgmii-mdio@8 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <8>;
-					status = "disabled";
-
-					phy_rgmii_0: ethernet-phy@0 {
-						reg = <0x0>;
-					};
-
-					phy_rgmii_1: ethernet-phy@1 {
-						reg = <0x1>;
-					};
-				};
-
-				hydra_mdio_sgmii: sgmii-mdio@28 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x28>;
-					status = "disabled";
-
-					phy_sgmii_1c: ethernet-phy@1c {
-						reg = <0x1c>;
-					};
-
-					phy_sgmii_1d: ethernet-phy@1d {
-						reg = <0x1d>;
-					};
-
-					phy_sgmii_1e: ethernet-phy@1e {
-						reg = <0x1e>;
-					};
-
-					phy_sgmii_1f: ethernet-phy@1f {
-						reg = <0x1f>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&espi0 {
-	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		/* input clock */
-		spi-max-frequency = <10000000>;
-	};
-};
-
-/include/ "p3041si-post.dtsi"
diff --git a/arch/powerpc/dts/p3041si-post.dtsi b/arch/powerpc/dts/p3041si-post.dtsi
deleted file mode 100644
index a3e8088d25b..00000000000
--- a/arch/powerpc/dts/p3041si-post.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * P3041 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 - 2015 Freescale Semiconductor Inc.
- * Copyright 2020 NXP
- *
- */
-
-&soc {
-
-/include/ "qoriq-clockgen1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-sec4.2-0.dtsi"
-
-/* include used FMan blocks */
-/include/ "qoriq-fman-0.dtsi"
-/include/ "qoriq-fman-0-1g-0.dtsi"
-/include/ "qoriq-fman-0-1g-1.dtsi"
-/include/ "qoriq-fman-0-1g-2.dtsi"
-/include/ "qoriq-fman-0-1g-3.dtsi"
-/include/ "qoriq-fman-0-1g-4.dtsi"
-/include/ "qoriq-fman-0-10g-0.dtsi"
-	fman@400000 {
-		enet0: ethernet@e0000 {
-		};
-
-		enet1: ethernet@e2000 {
-		};
-
-		enet2: ethernet@e4000 {
-		};
-
-		enet3: ethernet@e6000 {
-		};
-
-		enet4: ethernet@e8000 {
-		};
-
-		enet5: ethernet@f0000 {
-		};
-	};
-};
diff --git a/board/nxp/common/Makefile b/board/nxp/common/Makefile
index 46e43a4e45a..ba1aa084aa4 100644
--- a/board/nxp/common/Makefile
+++ b/board/nxp/common/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_DEEP_SLEEP)		+= mpc85xx_sleep.o
 endif
 
 
-obj-$(CONFIG_TARGET_P3041DS)		+= ics307_clk.o
 obj-$(CONFIG_TARGET_P4080DS)		+= ics307_clk.o
 obj-$(CONFIG_TARGET_P5040DS)		+= ics307_clk.o
 ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
@@ -67,7 +66,6 @@ obj-$(CONFIG_EMC2305)              += emc2305.o
 
 # deal with common files for P-series corenet based devices
 obj-$(CONFIG_TARGET_P2041RDB)	+= p_corenet/
-obj-$(CONFIG_TARGET_P3041DS)	+= p_corenet/
 obj-$(CONFIG_TARGET_P4080DS)	+= p_corenet/
 obj-$(CONFIG_TARGET_P5040DS)	+= p_corenet/
 
-- 
2.47.3


  parent reply	other threads:[~2026-10-09 19:54 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09 19:36 [PATCH 00/26] powerpc: drop EOL boards and SoCs, take over maintenance Bradley Morgan
2026-10-09 19:36 ` [PATCH 01/26] board: powerpc: Remove MPC8548CDS support Bradley Morgan
2026-10-09 21:55   ` Tom Rini
2026-10-10 10:51     ` Łukasz Majewski
2026-10-10 10:58       ` Bradley Morgan
2026-10-09 19:36 ` [PATCH 02/26] board: powerpc: Remove MPC837XERDB support Bradley Morgan
2026-10-09 20:18   ` Bradley Morgan
2026-10-09 19:36 ` [PATCH 03/26] board: powerpc: Remove P2020RDB-PC support Bradley Morgan
2026-10-09 19:36 ` Bradley Morgan [this message]
2026-10-09 19:36 ` [PATCH 05/26] board: powerpc: Remove P4080DS support Bradley Morgan
2026-10-09 19:36 ` [PATCH 06/26] board: powerpc: Remove P5040DS support Bradley Morgan
2026-10-09 19:36 ` [PATCH 07/26] board: powerpc: Remove T1042D4RDB support Bradley Morgan
2026-10-09 19:36 ` [PATCH 08/26] powerpc: mpc85xx: Remove P3041 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 09/26] powerpc: mpc85xx: Remove P4080 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 10/26] powerpc: mpc85xx: Remove P5040 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 11/26] powerpc: mpc83xx: Remove MPC837x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 12/26] powerpc: mpc85xx: Remove C29x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 13/26] powerpc: mpc85xx: Remove P1011 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 14/26] powerpc: mpc85xx: Remove P1023 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 15/26] powerpc: mpc85xx: Remove P1025 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 16/26] powerpc: mpc85xx: Remove MPC8536 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 17/26] powerpc: mpc85xx: Remove MPC8540 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 18/26] powerpc: mpc85xx: Remove MPC8560 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 19/26] powerpc: mpc85xx: Remove BSC9132 support Bradley Morgan
2026-10-09 19:36 ` [PATCH 20/26] powerpc: mpc83xx: Remove MPC831x support Bradley Morgan
2026-10-09 19:36 ` [PATCH 21/26] powerpc: mpc83xx: Remove MPC834x support Bradley Morgan
2026-10-09 19:37 ` [PATCH 22/26] powerpc: mpc85xx: Remove P1024 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 23/26] powerpc: mpc85xx: Remove BSC9131 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 24/26] powerpc: mpc83xx: Remove MPC8309 support Bradley Morgan
2026-10-09 19:37 ` [PATCH 25/26] powerpc: Remove MPC86xx support Bradley Morgan
2026-10-09 19:37 ` [PATCH 26/26] MAINTAINERS: powerpc: Add me as PowerPC maintainer Bradley Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261009193704.13061-5-brads@mainlining.org \
    --to=brads@mainlining.org \
    --cc=alchark@flipper.net \
    --cc=anshuld@ti.com \
    --cc=daniel@makrotopia.org \
    --cc=festevam@gmail.com \
    --cc=gaurav.jain@nxp.com \
    --cc=hppiscas@163.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=james.hilliard1@gmail.com \
    --cc=jbx6244@gmail.com \
    --cc=jerome.forissier@arm.com \
    --cc=jh80.chung@samsung.com \
    --cc=kabel@kernel.org \
    --cc=lukma@nabladev.com \
    --cc=marek.mojik@nic.cz \
    --cc=marek.vasut+usb@mailbox.org \
    --cc=mario.six@gdsys.cc \
    --cc=michal.simek@amd.com \
    --cc=mwalle@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=peng.fan@nxp.com \
    --cc=priyanka.jain@nxp.com \
    --cc=quentin.schulz@cherry.de \
    --cc=sbabic@nabladev.com \
    --cc=sjg@chromium.org \
    --cc=tanmay.kathpalia@altera.com \
    --cc=torsten.rupp@8tronix.de \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.u-boot-project.org \
    --cc=uboot-imx@nxp.com \
    --cc=vjardin@free.fr \
    --cc=weijie.gao@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.