All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zi-Yu Chen <zychennvt@gmail.com>
To: rafael@kernel.org, daniel.lezcano@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, p.zabel@pengutronix.de,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	rui.zhang@intel.com, lukasz.luba@arm.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support
Date: Tue, 17 Nov 2026 14:04:57 +0800	[thread overview]
Message-ID: <20261117060501.2611071-1-zychennvt@gmail.com> (raw)

This series adds support for the on-chip temperature sensor of the
Nuvoton MA35D1 SoC.

The sensor has no register region of its own; it is controlled through
a single register in the system management (SYS) block, which is
already described in DT and bound to the MA35D1 reset driver. Rather
than adding a child node that would only exist to instantiate a driver,
the SYS node is made the thermal sensor provider, and the reset driver
creates an auxiliary device that the thermal driver binds to.

Patch 1 documents #thermal-sensor-cells for the SYS node, patch 2 makes
the reset driver create the auxiliary device, patch 3 adds the thermal
driver and patch 4 adds the thermal zone to the SoC dtsi.

Tested on the MA35D1-SOM board.

Zi-Yu Chen (4):
  dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells
  reset: ma35d1: Register auxiliary device for the temperature sensor
  thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver
  arm64: dts: nuvoton: ma35d1: Add thermal zone

 .../bindings/reset/nuvoton,ma35d1-reset.yaml  |  13 +-
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       |  16 ++
 drivers/reset/Kconfig                         |   1 +
 drivers/reset/reset-ma35d1.c                  |  11 +-
 drivers/thermal/Kconfig                       |  11 ++
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/ma35d1_thermal.c              | 149 ++++++++++++++++++
 7 files changed, 198 insertions(+), 4 deletions(-)
 create mode 100644 drivers/thermal/ma35d1_thermal.c

-- 
2.34.1


             reply	other threads:[~2026-11-17  6:06 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17  6:04 Zi-Yu Chen [this message]
2026-11-17  6:04 ` [PATCH 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells Zi-Yu Chen
2026-11-17  6:04 ` [PATCH 2/4] reset: ma35d1: Register auxiliary device for the temperature sensor Zi-Yu Chen
2026-11-17  6:05 ` [PATCH 3/4] thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver Zi-Yu Chen
2026-11-17  6:23   ` sashiko-bot
2026-11-17 14:16   ` Uwe Kleine-König
2026-11-18  0:46     ` zychen
2026-11-17  6:05 ` [PATCH 4/4] arm64: dts: nuvoton: ma35d1: Add thermal zone Zi-Yu Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117060501.2611071-1-zychennvt@gmail.com \
    --to=zychennvt@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=schung@nuvoton.com \
    --cc=ychuang3@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.