From: Zi-Yu Chen <zychennvt@gmail.com>
To: rafael@kernel.org, daniel.lezcano@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, p.zabel@pengutronix.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rui.zhang@intel.com, lukasz.luba@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells
Date: Tue, 17 Nov 2026 14:04:58 +0800 [thread overview]
Message-ID: <20261117060501.2611071-2-zychennvt@gmail.com> (raw)
In-Reply-To: <20261117060501.2611071-1-zychennvt@gmail.com>
The system management (SYS) block of the MA35D1 SoC also hosts the
on-chip temperature sensor. The sensor is controlled through a single
SYS register and has no resources of its own.
Allow the SYS node to act as a thermal sensor provider instead of
adding a child node that would only exist to instantiate a driver.
Reference the common thermal-sensor schema and update the title to
reflect that the node describes the whole SYS block. This makes
#thermal-sensor-cells a required property, which is fine as the sensor
is always present in the SoC and no driver depends on the property.
Signed-off-by: Zi-Yu Chen <zychennvt@gmail.com>
---
.../bindings/reset/nuvoton,ma35d1-reset.yaml | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
index 3ce7dcecd87a..a0cb0f98c1b1 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Nuvoton MA35D1 Reset Controller
+title: Nuvoton MA35D1 System Management (SYS) Block
maintainers:
- Chi-Fang Li <cfli0@nuvoton.com>
@@ -12,7 +12,10 @@ maintainers:
description:
The system reset controller can be used to reset various peripheral
- controllers in MA35D1 SoC.
+ controllers in MA35D1 SoC. It also hosts the on-chip temperature sensor.
+
+allOf:
+ - $ref: /schemas/thermal/thermal-sensor.yaml#
properties:
compatible:
@@ -26,12 +29,15 @@ properties:
'#reset-cells':
const: 1
+ '#thermal-sensor-cells':
+ const: 0
+
required:
- compatible
- reg
- '#reset-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
# system reset controller node:
@@ -41,6 +47,7 @@ examples:
compatible = "nuvoton,ma35d1-reset", "syscon";
reg = <0x40460000 0x200>;
#reset-cells = <1>;
+ #thermal-sensor-cells = <0>;
};
...
--
2.34.1
next prev parent reply other threads:[~2026-11-17 6:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 6:04 [PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support Zi-Yu Chen
2026-11-17 6:04 ` Zi-Yu Chen [this message]
2026-11-17 6:04 ` [PATCH 2/4] reset: ma35d1: Register auxiliary device for the temperature sensor Zi-Yu Chen
2026-11-17 6:05 ` [PATCH 3/4] thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver Zi-Yu Chen
2026-11-17 6:23 ` sashiko-bot
2026-11-17 14:16 ` Uwe Kleine-König
2026-11-18 0:46 ` zychen
2026-11-17 6:05 ` [PATCH 4/4] arm64: dts: nuvoton: ma35d1: Add thermal zone Zi-Yu Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117060501.2611071-2-zychennvt@gmail.com \
--to=zychennvt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.