From: Andreas Kemnade <andreas@kemnade.info>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Kevin Hilman" <khilman@baylibre.com>,
"Roger Quadros" <rogerq@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Russell King" <linux@armlinux.org.uk>,
"Paul Walmsley" <paul@pwsan.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Brian Masney" <bmasney+clk@redhat.com>,
"Jerome Brunet" <jbrunet+clk@baylibre.com>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>, "Andy Yan" <andyshrk@163.com>,
"Ulf Hansson" <ulfh@kernel.org>,
linux-clk@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 5/6] [RFT] ARM: OMAP2+: Convert to dev_clk_get_from_provider()
Date: Thu, 19 Nov 2026 22:50:17 +0100 [thread overview]
Message-ID: <20261119225017.15a7b5cc@kemnade.info> (raw)
In-Reply-To: <683b5b189409e5ee04100044fb615b01cb877f3d.1795094688.git.geert+renesas@glider.be>
On Thu, 19 Nov 2026 14:40:38 +0100
Geert Uytterhoeven <geert+renesas@glider.be> wrote:
> OMAP2+ clock handling uses of_clk_get_from_provider() to obtain clocks
> used for power management, so the latter show up as "deviceless" in the
> consumer column of the clk_summary file in debugfs.
>
> Fix this by using dev_clk_get_from_provider() instead, letting us pass
> the consumer device, too.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Compile-tested only.
>
> The first change is probably OK. The second change may fail if anything
> in the oh->od->pdev->dev chain is not available yet at this point.
Test on OMAP3:
$ diff -u clk-old clk-new
--- clk-old 2026-11-19 22:44:59.810807920 +0100
+++ clk-new 2026-11-19 22:26:52.862531880 +0100
@@ -1,17 +1,17 @@
enable prepare protect duty hardware connection
clock count count count rate accuracy phase cycle enable consumer id
---------------------------------------------------------------------------------------------------------------------------------------------
- oscillator 0 0 0 26000000 0 0 50000 Y deviceless of_clk_get_from_provider
+ oscillator 0 0 0 26000000 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
- secure_32k_fck 0 1 0 32768 0 0 50000 Y deviceless of_clk_get_from_provider
+ secure_32k_fck 0 1 0 32768 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
- wdt1_fck 0 0 0 32768 0 0 50000 Y deviceless of_clk_get_from_provider
+ wdt1_fck 0 0 0 32768 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
gpt12_fck 0 1 0 32768 0 0 50000 Y 48304000.timer fck
48304000.target-module fck
- deviceless of_clk_get_from_provider
+ deviceless dev_clk_get_from_provider
deviceless no_connection_id
- dummy_ck 0 0 0 0 0 0 50000 Y deviceless of_clk_get_from_provider
+ dummy_ck 0 0 0 0 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
mcbsp_clks 0 5 0 0 0 0 50000 Y deviceless mcbsp_clks
deviceless mcbsp_clks
[...]
Regards,
Andreas
> ---
> arch/arm/mach-omap2/omap_device.c | 2 +-
> arch/arm/mach-omap2/omap_hwmod.c | 3 ++-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
> index 77a75b0b9ae69c85..5695e0c8f2392eca 100644
> --- a/arch/arm/mach-omap2/omap_device.c
> +++ b/arch/arm/mach-omap2/omap_device.c
> @@ -73,7 +73,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
>
> clkspec.np = of_find_node_by_name(NULL, clk_name);
>
> - r = of_clk_get_from_provider(&clkspec);
> + r = dev_clk_get_from_provider(&od->pdev->dev, &clkspec);
>
> rc = clk_register_clkdev(r, clk_alias,
> dev_name(&od->pdev->dev));
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index 03cd523dff874bb0..5e4123014909d4ac 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -147,6 +147,7 @@
> #include <asm/system_misc.h>
>
> #include "clock.h"
> +#include "omap_device.h"
> #include "omap_hwmod.h"
>
> #include "soc.h"
> @@ -796,7 +797,7 @@ static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
> clkspec.args[0] = addr - provider->addr[0];
> clkspec.args[1] = 0;
>
> - clk = of_clk_get_from_provider(&clkspec);
> + clk = dev_clk_get_from_provider(&oh->od->pdev->dev, &clkspec);
>
> pr_debug("%s: %s got %p (offset=%x, provider=%pOF)\n",
> __func__, oh->name, clk,
WARNING: multiple messages have this Message-ID (diff)
From: Andreas Kemnade <andreas@kemnade.info>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Kevin Hilman" <khilman@baylibre.com>,
"Roger Quadros" <rogerq@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Russell King" <linux@armlinux.org.uk>,
"Paul Walmsley" <paul@pwsan.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Brian Masney" <bmasney+clk@redhat.com>,
"Jerome Brunet" <jbrunet+clk@baylibre.com>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>, "Andy Yan" <andyshrk@163.com>,
"Ulf Hansson" <ulfh@kernel.org>,
linux-clk@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 5/6] [RFT] ARM: OMAP2+: Convert to dev_clk_get_from_provider()
Date: Thu, 19 Nov 2026 22:50:17 +0100 [thread overview]
Message-ID: <20261119225017.15a7b5cc@kemnade.info> (raw)
In-Reply-To: <683b5b189409e5ee04100044fb615b01cb877f3d.1795094688.git.geert+renesas@glider.be>
On Thu, 19 Nov 2026 14:40:38 +0100
Geert Uytterhoeven <geert+renesas@glider.be> wrote:
> OMAP2+ clock handling uses of_clk_get_from_provider() to obtain clocks
> used for power management, so the latter show up as "deviceless" in the
> consumer column of the clk_summary file in debugfs.
>
> Fix this by using dev_clk_get_from_provider() instead, letting us pass
> the consumer device, too.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Compile-tested only.
>
> The first change is probably OK. The second change may fail if anything
> in the oh->od->pdev->dev chain is not available yet at this point.
Test on OMAP3:
$ diff -u clk-old clk-new
--- clk-old 2026-11-19 22:44:59.810807920 +0100
+++ clk-new 2026-11-19 22:26:52.862531880 +0100
@@ -1,17 +1,17 @@
enable prepare protect duty hardware connection
clock count count count rate accuracy phase cycle enable consumer id
---------------------------------------------------------------------------------------------------------------------------------------------
- oscillator 0 0 0 26000000 0 0 50000 Y deviceless of_clk_get_from_provider
+ oscillator 0 0 0 26000000 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
- secure_32k_fck 0 1 0 32768 0 0 50000 Y deviceless of_clk_get_from_provider
+ secure_32k_fck 0 1 0 32768 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
- wdt1_fck 0 0 0 32768 0 0 50000 Y deviceless of_clk_get_from_provider
+ wdt1_fck 0 0 0 32768 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
gpt12_fck 0 1 0 32768 0 0 50000 Y 48304000.timer fck
48304000.target-module fck
- deviceless of_clk_get_from_provider
+ deviceless dev_clk_get_from_provider
deviceless no_connection_id
- dummy_ck 0 0 0 0 0 0 50000 Y deviceless of_clk_get_from_provider
+ dummy_ck 0 0 0 0 0 0 50000 Y deviceless dev_clk_get_from_provider
deviceless no_connection_id
mcbsp_clks 0 5 0 0 0 0 50000 Y deviceless mcbsp_clks
deviceless mcbsp_clks
[...]
Regards,
Andreas
> ---
> arch/arm/mach-omap2/omap_device.c | 2 +-
> arch/arm/mach-omap2/omap_hwmod.c | 3 ++-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
> index 77a75b0b9ae69c85..5695e0c8f2392eca 100644
> --- a/arch/arm/mach-omap2/omap_device.c
> +++ b/arch/arm/mach-omap2/omap_device.c
> @@ -73,7 +73,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
>
> clkspec.np = of_find_node_by_name(NULL, clk_name);
>
> - r = of_clk_get_from_provider(&clkspec);
> + r = dev_clk_get_from_provider(&od->pdev->dev, &clkspec);
>
> rc = clk_register_clkdev(r, clk_alias,
> dev_name(&od->pdev->dev));
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index 03cd523dff874bb0..5e4123014909d4ac 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -147,6 +147,7 @@
> #include <asm/system_misc.h>
>
> #include "clock.h"
> +#include "omap_device.h"
> #include "omap_hwmod.h"
>
> #include "soc.h"
> @@ -796,7 +797,7 @@ static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
> clkspec.args[0] = addr - provider->addr[0];
> clkspec.args[1] = 0;
>
> - clk = of_clk_get_from_provider(&clkspec);
> + clk = dev_clk_get_from_provider(&oh->od->pdev->dev, &clkspec);
>
> pr_debug("%s: %s got %p (offset=%x, provider=%pOF)\n",
> __func__, oh->name, clk,
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-11-19 21:50 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 13:40 [PATCH 0/6] clk: Improve consumer field in debugfs clk_summary Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-19 13:40 ` [PATCH 1/6] clk: Remove unused clk.dev Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-20 1:40 ` Brian Masney
2026-11-20 1:40 ` Brian Masney
2026-11-20 7:44 ` Geert Uytterhoeven
2026-11-20 7:44 ` Geert Uytterhoeven
2026-11-20 16:56 ` Brian Masney
2026-11-20 16:56 ` Brian Masney
2026-11-19 13:40 ` [PATCH 2/6] clk: Add dev_clk_get_from_provider() Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-20 1:40 ` Brian Masney
2026-11-20 1:40 ` Brian Masney
2026-11-19 13:40 ` [PATCH 3/6] clk: renesas: Convert to dev_clk_get_from_provider() Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-20 1:40 ` Brian Masney
2026-11-20 1:40 ` Brian Masney
2026-11-19 13:40 ` [PATCH 4/6] [RFT] drm/rockchip: dw_hdmi: " Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-20 1:40 ` Brian Masney
2026-11-20 1:40 ` Brian Masney
2026-11-19 13:40 ` [PATCH 5/6] [RFT] ARM: OMAP2+: " Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
2026-11-19 21:50 ` Andreas Kemnade [this message]
2026-11-19 21:50 ` Andreas Kemnade
2026-11-20 7:49 ` Geert Uytterhoeven
2026-11-20 7:49 ` Geert Uytterhoeven
2026-11-20 8:43 ` Andreas Kemnade
2026-11-20 8:43 ` Andreas Kemnade
2026-11-20 8:49 ` Geert Uytterhoeven
2026-11-20 8:49 ` Geert Uytterhoeven
2026-11-20 9:53 ` Andreas Kemnade
2026-11-20 9:53 ` Andreas Kemnade
2026-11-20 1:40 ` Brian Masney
2026-11-20 1:40 ` Brian Masney
2026-11-19 13:40 ` [PATCH 6/6] [RFC] pmdomain: renesas: r8a78000: " Geert Uytterhoeven
2026-11-19 13:40 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119225017.15a7b5cc@kemnade.info \
--to=andreas@kemnade.info \
--cc=aaro.koskinen@iki.fi \
--cc=andyshrk@163.com \
--cc=bmasney+clk@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jbrunet+clk@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=paul@pwsan.com \
--cc=rogerq@kernel.org \
--cc=sboyd@kernel.org \
--cc=tony@atomide.com \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.