All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>
To: qemu-devel@nongnu.org
Cc: "Helge Deller" <deller@gmx.de>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
	"Fam Zheng" <fam@euphon.net>,
	"Keith Monahan" <keith@techtravels.org>,
	"BALATON Zoltan" <balaton@eik.bme.hu>,
	"Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>
Subject: [RFC PATCH-for-11.2? v4 10/14] hw/scsi/ncr53c710: Append SAVE DATA POINTERS after MESSAGE REJECT for HP-UX
Date: Fri, 20 Nov 2026 18:12:30 +0100	[thread overview]
Message-ID: <20261120171235.61325-11-philmd@oss.qualcomm.com> (raw)
In-Reply-To: <20261120171235.61325-1-philmd@oss.qualcomm.com>

From: Keith Monahan <keith@techtravels.org>

The HP-UX 10.20 install kernel is nonconformant: its self modifying
SCRIPTS reads a second message byte after the MESSAGE REJECT that
declines SDTR/WDTR/PPR negotiation and hangs unless it is SAVE DATA
POINTERS, while NetBSD's osiop resets the bus if it sees that byte.
The two are told apart by ATN state as the reject is consumed (HP-UX
has deasserted ATN, a conformant initiator has not), so the extra byte
is appended only for HP-UX.

Signed-off-by: Keith Monahan <keith@techtravels.org>
Signed-off-by: Helge Deller <deller@gmx.de>
AI-used-for: Patch series decomposition (commit splitting and ordering)
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
---
 hw/scsi/ncr53c710.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/hw/scsi/ncr53c710.c b/hw/scsi/ncr53c710.c
index 9ca025ff6334..dfed2f2f9fdd 100644
--- a/hw/scsi/ncr53c710.c
+++ b/hw/scsi/ncr53c710.c
@@ -699,6 +699,10 @@ static void lsi_do_msgin(NCR710State *s)
     if (!s->msg_len) {
         switch (s->msg_action) {
         case LSI_MSG_ACTION_COMMAND:
+            /* A MESSAGE REJECT declining negotiation was just consumed. */
+            if (s->sfbr == 7 && !(s->socl & LSI_SOCL_ATN)) {
+                lsi_add_msg_byte(s, 2);   /* SAVE DATA POINTERS (HP-UX) */
+            }
             /* Stay in MSG IN until the next block move requests COMMAND. */
             break;
         case LSI_MSG_ACTION_DISCONNECT:
@@ -794,7 +798,12 @@ static void lsi_do_msgout(NCR710State *s)
     }
     return;
 reject:
-    /* Decline SDTR/WDTR/PPR negotiation with a single MESSAGE REJECT. */
+    /*
+     * Decline SDTR/WDTR/PPR negotiation with a single MESSAGE REJECT.  HP-UX
+     * requires a trailing SAVE DATA POINTERS (0x02), which other initiators
+     * reject.  HP-UX reads the reject with ATN deasserted, so lsi_do_msgin
+     * appends the 0x02 only then.
+     */
     lsi_set_phase(s, PHASE_MI);
     lsi_add_msg_byte(s, 7);           /* MESSAGE REJECT */
     s->msg_action = LSI_MSG_ACTION_COMMAND;
-- 
2.55.0



  parent reply	other threads:[~2026-11-20 17:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 17:12 [RFC PATCH-for-11.2 v4 00/14] nc53c710 rewrite Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 01/14] hw/scsi/ncr53c710: Cancel the in-flight request on soft reset Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 02/14] hw/scsi/ncr53c710: Do not load SBCL from DBC after a SCRIPTS phase move Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 03/14] hw/scsi/scsi-disk: Add quirk_mode_page_no_flexible_disk, use it on the 715 Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 04/14] hw/scsi/lasi_ncr710: Limit max_target and max_lun to 7 Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 05/14] hw/scsi/ncr53c710: Keep DCNTL.EA and DMODE.FC1 across an ISTAT.RST reset Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 06/14] hw/scsi: Move shared LSI/NCR definitions to lsi_scsi.h Philippe Mathieu-Daudé
2026-11-20 22:10   ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2??? v4 07/14] hw/scsi/ncr53c710: Rewrite the 53C710 SCRIPTS engine Philippe Mathieu-Daudé
2026-11-20 22:13   ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 08/14] hw/scsi/ncr53c710: Deliver completions from bottom halves Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 09/14] hw/scsi/ncr53c710: Drain asynchronous transfers in the register write Philippe Mathieu-Daudé
2026-11-20 17:12 ` Philippe Mathieu-Daudé [this message]
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 11/14] hw/scsi/ncr53c710: Guard SCRIPTS reentrancy and cancel requests on soft reset Philippe Mathieu-Daudé
2026-11-20 22:17   ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 12/14] hw/scsi/lasi_ncr710: Map the full LASI SCSI module page Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 13/14] hw/scsi/ncr53c710: Document the SIGP latch deviation Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 14/14] hw/scsi/ncr53c710: Bump the migration version Philippe Mathieu-Daudé
2026-11-20 22:21   ` BALATON Zoltan
2026-11-20 17:20 ` [RFC PATCH-for-11.2 v4 00/14] nc53c710 rewrite Philippe Mathieu-Daudé
2026-11-20 22:09   ` BALATON Zoltan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120171235.61325-11-philmd@oss.qualcomm.com \
    --to=philmd@oss.qualcomm.com \
    --cc=balaton@eik.bme.hu \
    --cc=deller@gmx.de \
    --cc=fam@euphon.net \
    --cc=keith@techtravels.org \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.