From: "Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>
To: qemu-devel@nongnu.org
Cc: "Helge Deller" <deller@gmx.de>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
"Fam Zheng" <fam@euphon.net>,
"Keith Monahan" <keith@techtravels.org>,
"BALATON Zoltan" <balaton@eik.bme.hu>,
"Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>
Subject: [RFC PATCH-for-11.2 v4 05/14] hw/scsi/ncr53c710: Keep DCNTL.EA and DMODE.FC1 across an ISTAT.RST reset
Date: Fri, 20 Nov 2026 18:12:25 +0100 [thread overview]
Message-ID: <20261120171235.61325-6-philmd@oss.qualcomm.com> (raw)
In-Reply-To: <20261120171235.61325-1-philmd@oss.qualcomm.com>
The NCR 53C710 data manual, ISTAT bit 6 (RST) description, says the
software reset clears all registers except that "This reset will not
clear the Enable Acknowledge (EA) or Function Control One (FC1) bits".
EA is DCNTL bit 5 and FC1 is DMODE bit 4. ncr710_soft_reset() cleared
both registers entirely.
Add named defines for the two bits and preserve them in the soft reset.
ncr710_soft_reset() is also used for device reset and realize, which
must still clear both bits, so those callers (the LASI reset and
realize handlers and the sysbus reset handler) now zero DCNTL and
DMODE after calling it.
The effect on real guest drivers has not been tested.
AI-used-for: Patch series decomposition (commit splitting and ordering)
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
---
hw/scsi/ncr53c710.h | 5 +++++
hw/scsi/lasi_ncr710.c | 6 ++++++
hw/scsi/ncr53c710.c | 7 +++++--
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/hw/scsi/ncr53c710.h b/hw/scsi/ncr53c710.h
index 00b6a01577c0..7dd0fe5f7589 100644
--- a/hw/scsi/ncr53c710.h
+++ b/hw/scsi/ncr53c710.h
@@ -85,6 +85,11 @@
#define NCR710_DCNTL_REG 0x3B /* DMA Control */
#define NCR710_ADDER_REG 0x3C /* Adder Sum Output (32-bit, LE) */
+/* DMODE bit 4: Function Code 1 (FC1), kept by an ISTAT.RST soft reset. */
+#define NCR710_DMODE_FC1 0x10
+/* DCNTL bit 5: Enable Acknowledge (EA), kept by an ISTAT.RST soft reset. */
+#define NCR710_DCNTL_EA 0x20
+
#define NCR710_REG_SIZE 0x100
#define NCR710_BUF_SIZE 4096
diff --git a/hw/scsi/lasi_ncr710.c b/hw/scsi/lasi_ncr710.c
index 27234aadd390..27d8b5c74935 100644
--- a/hw/scsi/lasi_ncr710.c
+++ b/hw/scsi/lasi_ncr710.c
@@ -186,6 +186,9 @@ static void lasi_ncr710_realize(DeviceState *dev, Error **errp)
&s->ncr710);
ncr710_soft_reset(&s->ncr710);
+ /* A device reset clears EA and FC1; only ISTAT.RST keeps them. */
+ s->ncr710.dcntl = 0;
+ s->ncr710.dmode = 0;
trace_lasi_ncr710_timers_initialized(
(uint64_t)s->ncr710.reselection_retry_timer);
@@ -246,6 +249,9 @@ static void lasi_ncr710_reset(DeviceState *dev)
LasiNCR710State *s = LASI_NCR710(dev);
trace_lasi_ncr710_device_reset();
ncr710_soft_reset(&s->ncr710);
+ /* A device reset clears EA and FC1; only ISTAT.RST keeps them. */
+ s->ncr710.dcntl = 0;
+ s->ncr710.dmode = 0;
}
static void lasi_ncr710_instance_init(Object *obj)
diff --git a/hw/scsi/ncr53c710.c b/hw/scsi/ncr53c710.c
index 9ea2c47744e7..55153418e409 100644
--- a/hw/scsi/ncr53c710.c
+++ b/hw/scsi/ncr53c710.c
@@ -349,8 +349,8 @@ void ncr710_soft_reset(NCR710State *s)
s->ctest5 = 0;
s->dsp = 0;
s->dsps = 0;
- s->dmode = 0;
- s->dcntl = 0;
+ s->dmode &= NCR710_DMODE_FC1;
+ s->dcntl &= NCR710_DCNTL_EA;
s->scntl0 = 0xc0;
s->scntl1 = 0;
s->sstat0 = 0;
@@ -2266,6 +2266,9 @@ static void ncr710_device_reset(DeviceState *dev)
NCR710State *s = &sysbus_dev->ncr710;
ncr710_soft_reset(s);
+ /* A device reset clears EA and FC1; only ISTAT.RST keeps them. */
+ s->dcntl = 0;
+ s->dmode = 0;
}
static const struct SCSIBusInfo ncr710_scsi_info = {
--
2.55.0
next prev parent reply other threads:[~2026-11-20 17:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 17:12 [RFC PATCH-for-11.2 v4 00/14] nc53c710 rewrite Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 01/14] hw/scsi/ncr53c710: Cancel the in-flight request on soft reset Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 02/14] hw/scsi/ncr53c710: Do not load SBCL from DBC after a SCRIPTS phase move Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 03/14] hw/scsi/scsi-disk: Add quirk_mode_page_no_flexible_disk, use it on the 715 Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2 v4 04/14] hw/scsi/lasi_ncr710: Limit max_target and max_lun to 7 Philippe Mathieu-Daudé
2026-11-20 17:12 ` Philippe Mathieu-Daudé [this message]
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 06/14] hw/scsi: Move shared LSI/NCR definitions to lsi_scsi.h Philippe Mathieu-Daudé
2026-11-20 22:10 ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2??? v4 07/14] hw/scsi/ncr53c710: Rewrite the 53C710 SCRIPTS engine Philippe Mathieu-Daudé
2026-11-20 22:13 ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 08/14] hw/scsi/ncr53c710: Deliver completions from bottom halves Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 09/14] hw/scsi/ncr53c710: Drain asynchronous transfers in the register write Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 10/14] hw/scsi/ncr53c710: Append SAVE DATA POINTERS after MESSAGE REJECT for HP-UX Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 11/14] hw/scsi/ncr53c710: Guard SCRIPTS reentrancy and cancel requests on soft reset Philippe Mathieu-Daudé
2026-11-20 22:17 ` BALATON Zoltan
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 12/14] hw/scsi/lasi_ncr710: Map the full LASI SCSI module page Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 13/14] hw/scsi/ncr53c710: Document the SIGP latch deviation Philippe Mathieu-Daudé
2026-11-20 17:12 ` [RFC PATCH-for-11.2? v4 14/14] hw/scsi/ncr53c710: Bump the migration version Philippe Mathieu-Daudé
2026-11-20 22:21 ` BALATON Zoltan
2026-11-20 17:20 ` [RFC PATCH-for-11.2 v4 00/14] nc53c710 rewrite Philippe Mathieu-Daudé
2026-11-20 22:09 ` BALATON Zoltan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120171235.61325-6-philmd@oss.qualcomm.com \
--to=philmd@oss.qualcomm.com \
--cc=balaton@eik.bme.hu \
--cc=deller@gmx.de \
--cc=fam@euphon.net \
--cc=keith@techtravels.org \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.