From: Tomasz Figa <tomasz.figa@gmail.com>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org,
Kukjin Kim <kgene.kim@samsung.com>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
Sylwester Nawrocki <sylvester.nawrocki@gmail.com>,
Mark Brown <broonie@kernel.org>,
Thomas Abraham <thomas.abraham@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>
Subject: Re: [PATCH v2 00/18] Final Samsung PWM support cleanup
Date: Sat, 22 Jun 2013 20:04:47 +0200 [thread overview]
Message-ID: <2101400.j50IudOSWr@flatron> (raw)
In-Reply-To: <201306222001.49600.heiko@sntech.de>
Hi Heiko,
On Saturday 22 of June 2013 20:01:49 Heiko Stübner wrote:
> Am Freitag, 21. Juni 2013, 00:12:45 schrieb Tomasz Figa:
> > Since we now have a proper Samsung PWM clocksource driver in place,
> > we can proceed with further cleanup of PWM timers support on Samsung
> > SoCs.>
> > This series attempts to achieve this goal by:
> > 1) moving remaining Samsung platforms to the new clocksource driver
> > 2) removing old clocksource driver
> > 3) adding new multiplatform- and DT-aware PWM driver
> > 4) moving all Samsung platforms to use the new PWM driver
> > 5) removing old PWM driver
> > 6) removing all PWM-related code that is not used anymore
> >
> > Cleaning up the PWM driver is a bit tricky, because the design of
> > current driver makes it completely unsuitable for DT and
> > multiplatform and would require a heavy rework to make it usable,
> > breaking any existing Samsung PWM users by the way. To avoid any
> > breakage I decided to keep the old driver, add new one, move all
> > platforms to it and then remove the old one.
> >
> > See particular patches for more detailed descriptions.
> >
> > On S3C6410-based Tiny6410 (Mini6410-compatible), after enabling
> > pwm-beeper and Exynos4210-based Origen board (with PWM0 attached to a
> > scope):
> >
> > Tested-by: Tomasz Figa <tomasz.figa@gmail.com>
>
> On a s3c2416 based machine (with the additional two v3 patches)
>
> Tested-by: Heiko Stuebner <heiko@sntech.de>
>
>
> and again thanks for working on this :-)
Thanks for testing!
I hope we can get this merged ASAP, as this is an important prerequisite
for further work on S3C24xx and S3C64xx...
Best regards,
Tomasz
> > Changes since v1:
> > - made sure that suspend/resume is handled correctly in both
> >
> > clocksource and PWM drivers,
> >
> > - fixed incorrect definition of AUTORELOAD bit for channel 4,
> > - fixed order of registering PWM device and calling samsung_bl_set(),
> >
> > which assumes that PWM device has been already registered,
> >
> > - corrected commit messages of several patches,
> > - addressed all the valid comments from reviewers, including cleanup
> >
> > of most code originally copied from previous PWM driver,
> >
> > - rebased on top of current Kgene's for-next,
> > - tested on Exynos4210, verifying correct PWM output with a scope.
> >
> > Needs testing on other platforms as I could only compile test for
> > them.
> >
> > Tomasz Figa (18):
> > ARM: SAMSUNG: Unify base address definitions of timer block
> > ARM: SAMSUNG: Add new PWM platform device
> > ARM: SAMSUNG: Set PWM platform data
> > clocksource: samsung_pwm_timer: Cache clocksource register address
> > clocksource: samsung_pwm_timer: Do not use clocksource_mmio
> > clocksource: samsung_pwm_timer: Handle suspend/resume correctly
> > ARM: SAMSUNG: Move all platforms to new clocksource driver
> > ARM: SAMSUNG: Remove old samsung-time driver
> > ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
> > pwm: samsung: Rename to pwm-samsung-legacy
> > pwm: Add new pwm-samsung driver
> > ARM: SAMSUNG: Rework private data handling in dev-backlight
> > ARM: SAMSUNG: Modify board files to use new PWM platform device
> > pwm: Remove superseded pwm-samsung-legacy driver
> > ARM: SAMSUNG: Remove old PWM timer platform devices
> > ARM: SAMSUNG: Remove pwm-clock infrastructure
> > ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
> > ARM: SAMSUNG: Remove plat/regs-timer.h header
> >
> > arch/arm/Kconfig | 1 -
> > arch/arm/mach-s3c24xx/Kconfig | 12 +-
> > arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
> > arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
> > arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
> > arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
> > arch/arm/mach-s3c24xx/common.c | 27 +
> > arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
> > arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
> > arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
> > arch/arm/mach-s3c64xx/Kconfig | 4 +-
> > arch/arm/mach-s3c64xx/clock.c | 2 -
> > arch/arm/mach-s3c64xx/common.c | 32 +-
> > arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
> > arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> > arch/arm/mach-s3c64xx/irq-pm.c | 2 -
> > arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
> > arch/arm/mach-s5p64x0/Kconfig | 4 +-
> > arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
> > arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
> > arch/arm/mach-s5p64x0/common.c | 27 +
> > arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
> > arch/arm/mach-s5p64x0/mach-smdk6440.c | 5 +-
> > arch/arm/mach-s5p64x0/mach-smdk6450.c | 5 +-
> > arch/arm/mach-s5p64x0/pm.c | 3 -
> > arch/arm/mach-s5pc100/Kconfig | 2 +-
> > arch/arm/mach-s5pc100/clock.c | 2 -
> > arch/arm/mach-s5pc100/common.c | 28 +
> > arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5pc100/include/mach/map.h | 1 +
> > arch/arm/mach-s5pc100/mach-smdkc100.c | 5 +-
> > arch/arm/mach-s5pv210/Kconfig | 2 +-
> > arch/arm/mach-s5pv210/clock.c | 1 -
> > arch/arm/mach-s5pv210/common.c | 28 +
> > arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5pv210/include/mach/map.h | 1 +
> > arch/arm/mach-s5pv210/mach-smdkv210.c | 5 +-
> > arch/arm/mach-s5pv210/pm.c | 10 -
> > arch/arm/plat-samsung/Kconfig | 14 -
> > arch/arm/plat-samsung/Makefile | 3 -
> > arch/arm/plat-samsung/dev-backlight.c | 61 +-
> > arch/arm/plat-samsung/devs.c | 42 +-
> > arch/arm/plat-samsung/include/plat/clock.h | 4 -
> > arch/arm/plat-samsung/include/plat/devs.h | 1 +
> > arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
> > arch/arm/plat-samsung/include/plat/irqs.h | 9 -
> > arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
> > arch/arm/plat-samsung/include/plat/pwm-core.h | 24 +
> > arch/arm/plat-samsung/include/plat/regs-timer.h | 124 ----
> > arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
> > arch/arm/plat-samsung/irq-vic-timer.c | 98 ---
> > arch/arm/plat-samsung/pwm-clock.c | 474
> > --------------
> > arch/arm/plat-samsung/s5p-irq.c | 4 -
> > arch/arm/plat-samsung/samsung-time.c | 394 ------------
> > drivers/clocksource/samsung_pwm_timer.c | 84 +--
> > drivers/pwm/pwm-samsung.c | 694
> >
> > ++++++++++++++------- 60 files changed, 766 insertions(+), 1644
> > deletions(-)
> >
> > delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
> > delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
> > create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
> > delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
> > delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
> > delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
> > delete mode 100644 arch/arm/plat-samsung/samsung-time.c
WARNING: multiple messages have this Message-ID (diff)
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/18] Final Samsung PWM support cleanup
Date: Sat, 22 Jun 2013 20:04:47 +0200 [thread overview]
Message-ID: <2101400.j50IudOSWr@flatron> (raw)
In-Reply-To: <201306222001.49600.heiko@sntech.de>
Hi Heiko,
On Saturday 22 of June 2013 20:01:49 Heiko St?bner wrote:
> Am Freitag, 21. Juni 2013, 00:12:45 schrieb Tomasz Figa:
> > Since we now have a proper Samsung PWM clocksource driver in place,
> > we can proceed with further cleanup of PWM timers support on Samsung
> > SoCs.>
> > This series attempts to achieve this goal by:
> > 1) moving remaining Samsung platforms to the new clocksource driver
> > 2) removing old clocksource driver
> > 3) adding new multiplatform- and DT-aware PWM driver
> > 4) moving all Samsung platforms to use the new PWM driver
> > 5) removing old PWM driver
> > 6) removing all PWM-related code that is not used anymore
> >
> > Cleaning up the PWM driver is a bit tricky, because the design of
> > current driver makes it completely unsuitable for DT and
> > multiplatform and would require a heavy rework to make it usable,
> > breaking any existing Samsung PWM users by the way. To avoid any
> > breakage I decided to keep the old driver, add new one, move all
> > platforms to it and then remove the old one.
> >
> > See particular patches for more detailed descriptions.
> >
> > On S3C6410-based Tiny6410 (Mini6410-compatible), after enabling
> > pwm-beeper and Exynos4210-based Origen board (with PWM0 attached to a
> > scope):
> >
> > Tested-by: Tomasz Figa <tomasz.figa@gmail.com>
>
> On a s3c2416 based machine (with the additional two v3 patches)
>
> Tested-by: Heiko Stuebner <heiko@sntech.de>
>
>
> and again thanks for working on this :-)
Thanks for testing!
I hope we can get this merged ASAP, as this is an important prerequisite
for further work on S3C24xx and S3C64xx...
Best regards,
Tomasz
> > Changes since v1:
> > - made sure that suspend/resume is handled correctly in both
> >
> > clocksource and PWM drivers,
> >
> > - fixed incorrect definition of AUTORELOAD bit for channel 4,
> > - fixed order of registering PWM device and calling samsung_bl_set(),
> >
> > which assumes that PWM device has been already registered,
> >
> > - corrected commit messages of several patches,
> > - addressed all the valid comments from reviewers, including cleanup
> >
> > of most code originally copied from previous PWM driver,
> >
> > - rebased on top of current Kgene's for-next,
> > - tested on Exynos4210, verifying correct PWM output with a scope.
> >
> > Needs testing on other platforms as I could only compile test for
> > them.
> >
> > Tomasz Figa (18):
> > ARM: SAMSUNG: Unify base address definitions of timer block
> > ARM: SAMSUNG: Add new PWM platform device
> > ARM: SAMSUNG: Set PWM platform data
> > clocksource: samsung_pwm_timer: Cache clocksource register address
> > clocksource: samsung_pwm_timer: Do not use clocksource_mmio
> > clocksource: samsung_pwm_timer: Handle suspend/resume correctly
> > ARM: SAMSUNG: Move all platforms to new clocksource driver
> > ARM: SAMSUNG: Remove old samsung-time driver
> > ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
> > pwm: samsung: Rename to pwm-samsung-legacy
> > pwm: Add new pwm-samsung driver
> > ARM: SAMSUNG: Rework private data handling in dev-backlight
> > ARM: SAMSUNG: Modify board files to use new PWM platform device
> > pwm: Remove superseded pwm-samsung-legacy driver
> > ARM: SAMSUNG: Remove old PWM timer platform devices
> > ARM: SAMSUNG: Remove pwm-clock infrastructure
> > ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
> > ARM: SAMSUNG: Remove plat/regs-timer.h header
> >
> > arch/arm/Kconfig | 1 -
> > arch/arm/mach-s3c24xx/Kconfig | 12 +-
> > arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
> > arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
> > arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
> > arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
> > arch/arm/mach-s3c24xx/common.c | 27 +
> > arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
> > arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
> > arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
> > arch/arm/mach-s3c64xx/Kconfig | 4 +-
> > arch/arm/mach-s3c64xx/clock.c | 2 -
> > arch/arm/mach-s3c64xx/common.c | 32 +-
> > arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
> > arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> > arch/arm/mach-s3c64xx/irq-pm.c | 2 -
> > arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
> > arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
> > arch/arm/mach-s5p64x0/Kconfig | 4 +-
> > arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
> > arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
> > arch/arm/mach-s5p64x0/common.c | 27 +
> > arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
> > arch/arm/mach-s5p64x0/mach-smdk6440.c | 5 +-
> > arch/arm/mach-s5p64x0/mach-smdk6450.c | 5 +-
> > arch/arm/mach-s5p64x0/pm.c | 3 -
> > arch/arm/mach-s5pc100/Kconfig | 2 +-
> > arch/arm/mach-s5pc100/clock.c | 2 -
> > arch/arm/mach-s5pc100/common.c | 28 +
> > arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5pc100/include/mach/map.h | 1 +
> > arch/arm/mach-s5pc100/mach-smdkc100.c | 5 +-
> > arch/arm/mach-s5pv210/Kconfig | 2 +-
> > arch/arm/mach-s5pv210/clock.c | 1 -
> > arch/arm/mach-s5pv210/common.c | 28 +
> > arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
> > arch/arm/mach-s5pv210/include/mach/map.h | 1 +
> > arch/arm/mach-s5pv210/mach-smdkv210.c | 5 +-
> > arch/arm/mach-s5pv210/pm.c | 10 -
> > arch/arm/plat-samsung/Kconfig | 14 -
> > arch/arm/plat-samsung/Makefile | 3 -
> > arch/arm/plat-samsung/dev-backlight.c | 61 +-
> > arch/arm/plat-samsung/devs.c | 42 +-
> > arch/arm/plat-samsung/include/plat/clock.h | 4 -
> > arch/arm/plat-samsung/include/plat/devs.h | 1 +
> > arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
> > arch/arm/plat-samsung/include/plat/irqs.h | 9 -
> > arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
> > arch/arm/plat-samsung/include/plat/pwm-core.h | 24 +
> > arch/arm/plat-samsung/include/plat/regs-timer.h | 124 ----
> > arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
> > arch/arm/plat-samsung/irq-vic-timer.c | 98 ---
> > arch/arm/plat-samsung/pwm-clock.c | 474
> > --------------
> > arch/arm/plat-samsung/s5p-irq.c | 4 -
> > arch/arm/plat-samsung/samsung-time.c | 394 ------------
> > drivers/clocksource/samsung_pwm_timer.c | 84 +--
> > drivers/pwm/pwm-samsung.c | 694
> >
> > ++++++++++++++------- 60 files changed, 766 insertions(+), 1644
> > deletions(-)
> >
> > delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
> > delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
> > create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
> > delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
> > delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
> > delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
> > delete mode 100644 arch/arm/plat-samsung/samsung-time.c
next prev parent reply other threads:[~2013-06-22 18:04 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 22:12 [PATCH v2 00/18] Final Samsung PWM support cleanup Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 01/18] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 02/18] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 03/18] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 04/18] clocksource: samsung_pwm_timer: Cache clocksource register address Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 05/18] clocksource: samsung_pwm_timer: Do not use clocksource_mmio Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 06/18] clocksource: samsung_pwm_timer: Handle suspend/resume correctly Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 07/18] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-24 15:33 ` Kukjin Kim
2013-06-24 15:33 ` Kukjin Kim
2013-06-24 15:38 ` Tomasz Figa
2013-06-24 15:38 ` Tomasz Figa
2013-06-24 15:46 ` Kukjin Kim
2013-06-24 15:46 ` Kukjin Kim
2013-06-24 15:49 ` Tomasz Figa
2013-06-24 15:49 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 08/18] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 09/18] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 10/18] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-22 13:09 ` [PATCH v3 " Tomasz Figa
2013-06-22 13:09 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 11/18] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-22 13:06 ` [PATCH v3 " Tomasz Figa
2013-06-22 13:06 ` Tomasz Figa
2013-06-24 15:22 ` Kukjin Kim
2013-06-24 15:22 ` Kukjin Kim
2013-06-24 15:37 ` Tomasz Figa
2013-06-24 15:37 ` Tomasz Figa
2013-06-24 17:49 ` Thierry Reding
2013-06-24 17:49 ` Thierry Reding
2013-06-24 18:31 ` Tomasz Figa
2013-06-24 18:31 ` Tomasz Figa
2013-06-24 20:13 ` Thierry Reding
2013-06-24 20:13 ` Thierry Reding
2013-06-24 20:32 ` Tomasz Figa
2013-06-24 20:32 ` Tomasz Figa
2013-06-24 20:53 ` Thierry Reding
2013-06-24 20:53 ` Thierry Reding
2013-06-24 21:17 ` Tomasz Figa
2013-06-24 21:17 ` Tomasz Figa
2013-06-25 10:26 ` Thierry Reding
2013-06-25 10:26 ` Thierry Reding
2013-06-25 10:26 ` Thierry Reding
2013-06-25 11:19 ` Tomasz Figa
2013-06-25 11:19 ` Tomasz Figa
2013-06-25 15:18 ` Mark Brown
2013-06-25 15:18 ` Mark Brown
2013-06-25 16:41 ` Kukjin Kim
2013-06-25 16:41 ` Kukjin Kim
2013-06-25 16:30 ` Kukjin Kim
2013-06-25 16:30 ` Kukjin Kim
2013-06-20 22:12 ` [PATCH v2 12/18] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 13/18] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 14/18] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 15/18] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-20 22:13 ` Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 16/18] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-20 22:13 ` Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 17/18] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-20 22:13 ` Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 18/18] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-20 22:13 ` Tomasz Figa
2013-06-20 23:05 ` [PATCH v2 00/18] Final Samsung PWM support cleanup Tomasz Figa
2013-06-20 23:05 ` Tomasz Figa
2013-06-21 14:04 ` Arnd Bergmann
2013-06-21 14:04 ` Arnd Bergmann
2013-06-21 14:04 ` Arnd Bergmann
2013-06-22 13:10 ` Tomasz Figa
2013-06-22 13:10 ` Tomasz Figa
2013-06-22 18:01 ` Heiko Stübner
2013-06-22 18:01 ` Heiko Stübner
2013-06-22 18:04 ` Tomasz Figa [this message]
2013-06-22 18:04 ` Tomasz Figa
2013-06-24 0:14 ` Kukjin Kim
2013-06-24 0:14 ` Kukjin Kim
2013-06-22 19:34 ` Sylwester Nawrocki
2013-06-22 19:34 ` Sylwester Nawrocki
2013-06-22 19:34 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2101400.j50IudOSWr@flatron \
--to=tomasz.figa@gmail.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=sylvester.nawrocki@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.