All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ayush Singh <ayushdevel1325@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	greybus-dev@lists.linaro.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, vaishnav@beagleboard.org,
	jkridner@beagleboard.org, nm@ti.com,
	krzysztof.kozlowski+dt@linaro.org, vigneshr@ti.com,
	kristo@kernel.org, robh+dt@kernel.org, conor+dt@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352
Date: Tue, 3 Oct 2023 17:39:08 +0530	[thread overview]
Message-ID: <2105b93c-0502-e909-ea09-dba73d43b912@gmail.com> (raw)
In-Reply-To: <55f63415-781a-4107-8643-9f77c7ee38d1@linaro.org>

>> driver.
>>
>> Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
>> ---
>>   .../devicetree/bindings/net/ti,cc1352p7.yaml  | 48 +++++++++++++++++++
>>   MAINTAINERS                                   |  6 +++
>>   2 files changed, 54 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>> new file mode 100644
>> index 000000000000..57bc2c43e5b1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>> @@ -0,0 +1,48 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments Simplelink CC1352P7 wireless MCU
>> +
>> +description:
>> +  The cc1352p7 mcu can be connected via SPI or UART.
> If over SPI, then the binding is incomplete. This is fine for now, I guess.
>
> Best regards,
> Krzysztof

Well, I added the line about SPI because the data sheet states that 
CC1352P7 can be connected over SPI or UART when used as wireless MCU. 
But yes, I do not have much knowledge about SPI itself, so the bindings 
might be incomplete for SPI usage. Should I remove it or leave it be?


Sincerely,

Ayush Singh


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Ayush Singh <ayushdevel1325@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	greybus-dev@lists.linaro.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, vaishnav@beagleboard.org,
	jkridner@beagleboard.org, nm@ti.com,
	krzysztof.kozlowski+dt@linaro.org, vigneshr@ti.com,
	kristo@kernel.org, robh+dt@kernel.org, conor+dt@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352
Date: Tue, 3 Oct 2023 17:39:08 +0530	[thread overview]
Message-ID: <2105b93c-0502-e909-ea09-dba73d43b912@gmail.com> (raw)
In-Reply-To: <55f63415-781a-4107-8643-9f77c7ee38d1@linaro.org>

>> driver.
>>
>> Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
>> ---
>>   .../devicetree/bindings/net/ti,cc1352p7.yaml  | 48 +++++++++++++++++++
>>   MAINTAINERS                                   |  6 +++
>>   2 files changed, 54 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>> new file mode 100644
>> index 000000000000..57bc2c43e5b1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
>> @@ -0,0 +1,48 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments Simplelink CC1352P7 wireless MCU
>> +
>> +description:
>> +  The cc1352p7 mcu can be connected via SPI or UART.
> If over SPI, then the binding is incomplete. This is fine for now, I guess.
>
> Best regards,
> Krzysztof

Well, I added the line about SPI because the data sheet states that 
CC1352P7 can be connected over SPI or UART when used as wireless MCU. 
But yes, I do not have much knowledge about SPI itself, so the bindings 
might be incomplete for SPI usage. Should I remove it or leave it be?


Sincerely,

Ayush Singh


  reply	other threads:[~2023-10-03 12:09 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-02 18:24 [PATCH v6 0/3] greybus: Add BeaglePlay Greybus Driver Ayush Singh
2023-10-02 18:24 ` [PATCH v6 1/3] dt-bindings: Add beaglecc1352 Ayush Singh
2023-10-02 18:24   ` Ayush Singh
2023-10-03  8:21   ` Krzysztof Kozlowski
2023-10-03  8:21     ` Krzysztof Kozlowski
2023-10-03 12:09     ` Ayush Singh [this message]
2023-10-03 12:09       ` Ayush Singh
2023-10-03 13:07       ` Nishanth Menon
2023-10-03 13:07         ` Nishanth Menon
2023-10-03 11:30   ` Nishanth Menon
2023-10-03 11:30     ` Nishanth Menon
2023-10-03 12:47     ` Ayush Singh
2023-10-03 12:47       ` Ayush Singh
2023-10-03 13:05       ` Nishanth Menon
2023-10-03 13:05         ` Nishanth Menon
2023-10-02 18:24 ` [PATCH v6 2/3] greybus: Add BeaglePlay Linux Driver Ayush Singh
2023-10-03  7:40   ` kernel test robot
2023-10-03  8:25   ` Krzysztof Kozlowski
2023-10-02 18:24 ` [PATCH v6 3/3] dts: ti: k3-am625-beagleplay: Add beaglecc1352 Ayush Singh
2023-10-02 18:24   ` Ayush Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2105b93c-0502-e909-ea09-dba73d43b912@gmail.com \
    --to=ayushdevel1325@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=greybus-dev@lists.linaro.org \
    --cc=jkridner@beagleboard.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vaishnav@beagleboard.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.