From: devzero@web.de
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: akpm@linux-foundation.org, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default)
Date: Thu, 27 Mar 2008 22:43:52 +0100 [thread overview]
Message-ID: <215201015@web.de> (raw)
> What CPU/chipset is this?
opensuse103:~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.80GHz
stepping : 8
cpu MHz : 1798.691
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss up pebs bts
bogomips : 3627.10
clflush size : 64
opensuse103:~ # lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0f.0 VGA compatible controller: VMware Inc Abstract SVGA II Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 PCI bridge: VMware Inc Unknown device 0790 (rev 02)
02:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
to make sure that you didn`t miss my last post - i already found a possible correlation:
>i searched into this and found that it only happens after modprobe netsc520 ;modprobe -r netsc520.
>so maybe this is no acpi problem at all but corruption (sort of?) introduced by netsc520 module !?
regards
roland
> -----Ursprüngliche Nachricht-----
> Von: "Rafael J. Wysocki" <rjw@sisk.pl>
> Gesendet: 27.03.08 22:09:28
> An: devzero@web.de
> CC: Len Brown <lenb@kernel.org>, linux-acpi@vger.kernel.org, akpm@linux-foundation.org, linux-kernel@vger.kernel.org
> Betreff: Re: acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default)
>
> On Thursday, 27 of March 2008, devzero@web.de wrote:
> > > On Tuesday 25 March 2008, devzero@web.de wrote:
> > > ...
> > > > this one looks more serious (happened with modprobe -r ac),
> > > > because kernel has problems afterwards (cannot load/anload any other module afterwards)
> > >
> > > any idea when this started happening?
> > > Any chance you can snag the output from acpidump
> > > and attach it to a sighting here?:
> > > http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
> > >
> > > thanks,
> > > -Len
> >
> > i searched into this and found that it only happens after modprobe netsc520 ;modprobe -r netsc520.
> > so maybe this is no acpi problem at all but corruption (sort of?) introduced by netsc520 module !?
>
> What CPU/chipset is this?
>
> Rafael
>
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: devzero@web.de
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: akpm@linux-foundation.org, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default)
Date: Thu, 27 Mar 2008 22:43:52 +0100 [thread overview]
Message-ID: <215201015@web.de> (raw)
> What CPU/chipset is this?
opensuse103:~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.80GHz
stepping : 8
cpu MHz : 1798.691
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss up pebs bts
bogomips : 3627.10
clflush size : 64
opensuse103:~ # lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0f.0 VGA compatible controller: VMware Inc Abstract SVGA II Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 PCI bridge: VMware Inc Unknown device 0790 (rev 02)
02:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
to make sure that you didn`t miss my last post - i already found a possible correlation:
>i searched into this and found that it only happens after modprobe netsc520 ;modprobe -r netsc520.
>so maybe this is no acpi problem at all but corruption (sort of?) introduced by netsc520 module !?
regards
roland
> -----Ursprüngliche Nachricht-----
> Von: "Rafael J. Wysocki" <rjw@sisk.pl>
> Gesendet: 27.03.08 22:09:28
> An: devzero@web.de
> CC: Len Brown <lenb@kernel.org>, linux-acpi@vger.kernel.org, akpm@linux-foundation.org, linux-kernel@vger.kernel.org
> Betreff: Re: acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default)
>
> On Thursday, 27 of March 2008, devzero@web.de wrote:
> > > On Tuesday 25 March 2008, devzero@web.de wrote:
> > > ...
> > > > this one looks more serious (happened with modprobe -r ac),
> > > > because kernel has problems afterwards (cannot load/anload any other module afterwards)
> > >
> > > any idea when this started happening?
> > > Any chance you can snag the output from acpidump
> > > and attach it to a sighting here?:
> > > http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
> > >
> > > thanks,
> > > -Len
> >
> > i searched into this and found that it only happens after modprobe netsc520 ;modprobe -r netsc520.
> > so maybe this is no acpi problem at all but corruption (sort of?) introduced by netsc520 module !?
>
> What CPU/chipset is this?
>
> Rafael
>
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
next reply other threads:[~2008-03-27 21:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-27 21:43 devzero [this message]
2008-03-27 21:43 ` acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default) devzero
-- strict thread matches above, loose matches on Subject: below --
2008-03-27 20:25 devzero
2008-03-27 21:08 ` Rafael J. Wysocki
2008-03-26 19:55 devzero
2008-03-25 23:00 some minor issues with 2.6.25-rc6-git7-default devzero
2008-03-25 23:37 ` acpi_ps_execute_method OOPS (Re: some minor issues with 2.6.25-rc6-git7-default) Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=215201015@web.de \
--to=devzero@web.de \
--cc=akpm@linux-foundation.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.