Re: [Xenomai-help] Porting I-Pipe for new ARM board

[Wael Showair <showair2003@domain.hid>]

[-- Attachment #1: Type: text/plain, Size: 1348 bytes --]

Yes please Didenko i would like that you send your code to me & to the whole xenomai-help post.
thanks



________________________________
From: Didenko Sergey <didenkos@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: Wael Showair <showair2003@domain.hid>; Xenomai-help@domain.hid
Sent: Tue, November 3, 2009 5:45:06 PM
Subject: Re: [Xenomai-help] Porting I-Pipe for new ARM board


Gilles, I gues you are talking about the code which I got for MV 88F6290.
With some changes it is working on my board now, so, Wael, if you want, I can send it to you in 10 hours, it should work on your board.
 
Sergey

2009/11/4 Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>

Wael Showair wrote:
>> Hi All,
>> i have TS-7800 board based on Marvell 88F5182 processor core.
>> Unfortunately it is not supported by I-Pipe patch so according to the
>> following link:
>>>
>> http://www.xenomai.org/index.php/I-pipe:ArmPorting
>>
>> And with aid of this forum thread:
>>
>> http://www.mail-archive.com/xenomai@xenomai.org
>
>>If you follow that thread, you will see that I already told its author
>>that the code was not correct.
>
>>Fortunately Philippe did a port which was tested and works, I will fix
>>one or two details and send it tonight (european time).
>
>--
>                                         Gilles
>
>



      

[-- Attachment #2: Type: text/html, Size: 3283 bytes --]