* [PATCH V2 0/3] Add GameForce Ace @ 2024-08-29 20:45 ` Chris Morgan 0 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Chris Morgan <macromorgan@hotmail.com> Add support for the GameForce Ace. The GameForce Ace is an RK3588s based gaming device with a 1080p display, touchscreen, hall effect joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, and support for a 2242 NVME. Changes since V1: - Update eMMC changes to note proper authorship. - Removed cw2015 changes for dual cell configuration. For the moment it's just cosmetic (aside from voltage_now reading incorrectly, no other issues were observed). - Removed USB bindings because vbus regulator isn't ready yet. Alex Zhao (1): arm64: dts: rockchip: rk3588s fix sdio pins to pull up Chris Morgan (2): dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: Add GameForce Ace .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ 4 files changed, 1248 insertions(+), 5 deletions(-) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH V2 0/3] Add GameForce Ace @ 2024-08-29 20:45 ` Chris Morgan 0 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Chris Morgan <macromorgan@hotmail.com> Add support for the GameForce Ace. The GameForce Ace is an RK3588s based gaming device with a 1080p display, touchscreen, hall effect joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, and support for a 2242 NVME. Changes since V1: - Update eMMC changes to note proper authorship. - Removed cw2015 changes for dual cell configuration. For the moment it's just cosmetic (aside from voltage_now reading incorrectly, no other issues were observed). - Removed USB bindings because vbus regulator isn't ready yet. Alex Zhao (1): arm64: dts: rockchip: rk3588s fix sdio pins to pull up Chris Morgan (2): dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: Add GameForce Ace .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ 4 files changed, 1248 insertions(+), 5 deletions(-) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts -- 2.34.1 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH V2 1/3] arm64: dts: rockchip: rk3588s fix sdio pins to pull up 2024-08-29 20:45 ` Chris Morgan @ 2024-08-29 20:45 ` Chris Morgan -1 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Alex Zhao <zzc@rock-chips.com> The sdio requires the cmd and data pins to pull up by soc. Signed-off-by: Alex Zhao <zzc@rock-chips.com> [adapted to pinctrl filename change] Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi index 30db12c4fc82..d1368418502a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi @@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins { /* sdio_clk_m1 */ <3 RK_PA5 2 &pcfg_pull_none>, /* sdio_cmd_m1 */ - <3 RK_PA4 2 &pcfg_pull_none>, + <3 RK_PA4 2 &pcfg_pull_up>, /* sdio_d0_m1 */ - <3 RK_PA0 2 &pcfg_pull_none>, + <3 RK_PA0 2 &pcfg_pull_up>, /* sdio_d1_m1 */ - <3 RK_PA1 2 &pcfg_pull_none>, + <3 RK_PA1 2 &pcfg_pull_up>, /* sdio_d2_m1 */ - <3 RK_PA2 2 &pcfg_pull_none>, + <3 RK_PA2 2 &pcfg_pull_up>, /* sdio_d3_m1 */ - <3 RK_PA3 2 &pcfg_pull_none>; + <3 RK_PA3 2 &pcfg_pull_up>; }; }; -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V2 1/3] arm64: dts: rockchip: rk3588s fix sdio pins to pull up @ 2024-08-29 20:45 ` Chris Morgan 0 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Alex Zhao <zzc@rock-chips.com> The sdio requires the cmd and data pins to pull up by soc. Signed-off-by: Alex Zhao <zzc@rock-chips.com> [adapted to pinctrl filename change] Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi index 30db12c4fc82..d1368418502a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi @@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins { /* sdio_clk_m1 */ <3 RK_PA5 2 &pcfg_pull_none>, /* sdio_cmd_m1 */ - <3 RK_PA4 2 &pcfg_pull_none>, + <3 RK_PA4 2 &pcfg_pull_up>, /* sdio_d0_m1 */ - <3 RK_PA0 2 &pcfg_pull_none>, + <3 RK_PA0 2 &pcfg_pull_up>, /* sdio_d1_m1 */ - <3 RK_PA1 2 &pcfg_pull_none>, + <3 RK_PA1 2 &pcfg_pull_up>, /* sdio_d2_m1 */ - <3 RK_PA2 2 &pcfg_pull_none>, + <3 RK_PA2 2 &pcfg_pull_up>, /* sdio_d3_m1 */ - <3 RK_PA3 2 &pcfg_pull_none>; + <3 RK_PA3 2 &pcfg_pull_up>; }; }; -- 2.34.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V2 2/3] dt-bindings: arm: rockchip: Add GameForce Ace 2024-08-29 20:45 ` Chris Morgan @ 2024-08-29 20:45 ` Chris Morgan -1 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan, Krzysztof Kozlowski From: Chris Morgan <macromorgan@hotmail.com> Add devicetree binding for the GameForce Ace. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 1ef09fbfdfaf..a5a2621404ae 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -255,6 +255,11 @@ properties: - const: friendlyarm,cm3588 - const: rockchip,rk3588 + - description: GameForce Ace + items: + - const: gameforce,ace + - const: rockchip,rk3588s + - description: GameForce Chi items: - const: gameforce,chi -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V2 2/3] dt-bindings: arm: rockchip: Add GameForce Ace @ 2024-08-29 20:45 ` Chris Morgan 0 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan, Krzysztof Kozlowski From: Chris Morgan <macromorgan@hotmail.com> Add devicetree binding for the GameForce Ace. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 1ef09fbfdfaf..a5a2621404ae 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -255,6 +255,11 @@ properties: - const: friendlyarm,cm3588 - const: rockchip,rk3588 + - description: GameForce Ace + items: + - const: gameforce,ace + - const: rockchip,rk3588s + - description: GameForce Chi items: - const: gameforce,chi -- 2.34.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V2 3/3] arm64: dts: rockchip: Add GameForce Ace 2024-08-29 20:45 ` Chris Morgan @ 2024-08-29 20:45 ` Chris Morgan -1 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Chris Morgan <macromorgan@hotmail.com> The GameForce Ace is a portable gaming device based on the Rockchip RK3588s SoC. The device contains the following hardware that is tested/working: - 128GB eMMC - SDMMC card slot - Ampak SDIO WiFi 5/BT - NVME 2242 socket - 8 or 12GB of RAM - Goodix based touchscreen - Stereo speakers, internal microphone, and TRRS headphone jack. - Dual GPIO vibrators (implemented as gpio-pwm because they are quite strong) - Multiple face buttons, dual analog joysticks, and dual analog triggers - PWM fan with tach pin. The device also contains the following hardware that is partially or currently not working: - 1920x1080 DSI display - HDMI port - USB-C port with DP alt-mode - TI bq25703 charger controller Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ 2 files changed, 1238 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..62c3e53d24b4 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts new file mode 100644 index 000000000000..91efb9dafc89 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -0,0 +1,1237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Gameforce Ace"; + chassis-type = "handset"; + compatible = "gameforce,ace", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + button-vol-up { + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + }; + + /* Joystick range values based on hardware observation. */ + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + #address-cells = <1>; + io-channels = <&saradc 2>, <&saradc 3>, + <&saradc 4>, <&saradc 5>; + poll-interval = <60>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RX>; + }; + + axis@1 { + reg = <1>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RY>; + }; + + axis@2 { + reg = <2>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_X>; + }; + }; + + /* Trigger range values based on hardware observation. */ + adc_triggers: adc-trigger { + compatible = "adc-joystick"; + #address-cells = <1>; + io-channels = <&ti_adc 6>, + <&ti_adc 7>; + poll-interval = <60>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <890 1530>; + linux,code = <ABS_HAT2X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <1010 1550>; + linux,code = <ABS_HAT2Y>; + }; + }; + + amp_headphone: headphone-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&headphone_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Headphones Amplifier"; + }; + + amp_speaker: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&vcc5v0_spk>; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_detect>; + pinctrl-names = "default"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "rockchip,es8388-codec"; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lcd_bl_en>; + pinctrl-names = "default"; + pwms = <&pwm13 0 25000 PWM_POLARITY_INVERTED>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3700000>; + constant-charge-current-max-microamp = <2500000>; + constant-charge-voltage-max-microvolt = <8750000>; + voltage-min-design-microvolt = <7400000>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-home { + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "FUNCTION"; + linux,code = <BTN_MODE>; + }; + + button-l1 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "L1"; + linux,code = <BTN_TL>; + }; + + button-left { + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-menu { + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; + label = "HOME"; + linux,code = <KEY_HOME>; + }; + + button-r1 { + gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + label = "R1"; + linux,code = <BTN_TR>; + }; + + button-right { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + }; + + red_led: led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; + + pwm_fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 120 150 180 210 240 255>; + fan-supply = <&vcc5v0_sys>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB2 IRQ_TYPE_EDGE_RISING>; + pulses-per-revolution = <4>; + pwms = <&pwm12 0 50000 PWM_POLARITY_INVERTED>; + }; + + pwm_gpio33: pwm-33 { + compatible = "pwm-gpio"; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_right_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + pwm_gpio132: pwm-132 { + compatible = "pwm-gpio"; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_left_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clock-names = "ext_clock"; + clocks = <&rtc_hym8563>; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lcd0_n: vcc3v3-lcd0-n-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3_s3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sd_s0_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_spk: vcc5v0-spk-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_spk_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_spk"; + vin-supply = <&vcc5v0_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + }; + + vibrator_l: vibrator-l { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio132 0 20000000 0>; + }; + + vibrator_r: vibrator-r { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio33 0 20000000 0>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c3 { + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>, <&touch_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + touchscreen-swapped-x-y; + }; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m2_xfer>; + status = "okay"; + + ti_adc: adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #io-channel-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + }; + + channel@5 { + reg = <5>; + }; + + channel@6 { + reg = <6>; + }; + + channel@7 { + reg = <7>; + }; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + rtc_hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&hym8563_int>, <&clk32k_in>; + pinctrl-names = "default"; + wakeup-source; + }; + + /* Battery profile from BSP device tree. */ + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + + cellwise,battery-profile = /bits/ 8 + <0x18 0x0A 0x76 0x6A 0x6A 0x6A 0x68 0x66 + 0x62 0x5E 0x5A 0x58 0x5F 0x59 0x46 0x3D + 0x35 0x2D 0x28 0x21 0x29 0x38 0x44 0x50 + 0x1A 0x85 0x07 0xAE 0x14 0x28 0x48 0x56 + 0x66 0x66 0x66 0x6A 0x3E 0x1A 0x6C 0x3D + 0x09 0x38 0x1A 0x49 0x7B 0x96 0xA2 0x15 + 0x3B 0x77 0x9A 0xB1 0x80 0x87 0xB0 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&battery>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + assigned-clock-rates = <12288000>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s3>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + DVDD-supply = <&vcc_1v8_s3>; + HPVDD-supply = <&vcc_3v3_s3>; + PVDD-supply = <&vcc_1v8_s3>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&package_fan0>; + cooling-device = <&pwm_fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&package_fan1>; + cooling-device = <&pwm_fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +/* + * Attempts to use an M.2 SATA in this slot worked intermittently + * with the correct nodes enabled in device-tree, but eventually + * resulted in a destroyed board. Advise caution. + */ +&pcie2x1l1 { + pinctrl-0 = <&pcie_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + hp_detect: headphone-detect { + rockchip,pins = + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + charger { + charger_int_h: charger-int-h { + rockchip,pins = + <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + boost_enable_h: boost-enable-h { + rockchip,pins = + <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd_bl_en { + lcd_bl_en: lcd-bl-en { + rockchip,pins = + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie-pins { + pcie_rst: pcie-rst { + rockchip,pins = + <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd-pwr { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = + <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + spk-pwr { + vcc5v0_spk_pwr: vcc5v0-spk-pwr { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_rst: touch-rst { + rockchip,pins = + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vibrator { + vib_left_h: vib-left-h { + rockchip,pins = + <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vib_right_h: vib-right-h { + rockchip,pins = + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm12 { + pinctrl-0 = <&pwm12m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-0 = <&pwm13m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + sd-uhs-sdr104; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-0 = <&wifi_host_wake_irq>; + pinctrl-names = "default"; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + #address-cells = <1>; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <675000>; + regulator-name = "vdd_logic_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_vdenc_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <837500>; + regulator-min-microvolt = <837500>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc_hym8563>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_l>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + }; +}; -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V2 3/3] arm64: dts: rockchip: Add GameForce Ace @ 2024-08-29 20:45 ` Chris Morgan 0 siblings, 0 replies; 14+ messages in thread From: Chris Morgan @ 2024-08-29 20:45 UTC (permalink / raw) To: linux-rockchip Cc: devicetree, jagan, zzc, andyshrk, jonas, heiko, conor+dt, krzk+dt, robh, Chris Morgan From: Chris Morgan <macromorgan@hotmail.com> The GameForce Ace is a portable gaming device based on the Rockchip RK3588s SoC. The device contains the following hardware that is tested/working: - 128GB eMMC - SDMMC card slot - Ampak SDIO WiFi 5/BT - NVME 2242 socket - 8 or 12GB of RAM - Goodix based touchscreen - Stereo speakers, internal microphone, and TRRS headphone jack. - Dual GPIO vibrators (implemented as gpio-pwm because they are quite strong) - Multiple face buttons, dual analog joysticks, and dual analog triggers - PWM fan with tach pin. The device also contains the following hardware that is partially or currently not working: - 1920x1080 DSI display - HDMI port - USB-C port with DP alt-mode - TI bq25703 charger controller Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ 2 files changed, 1238 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..62c3e53d24b4 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts new file mode 100644 index 000000000000..91efb9dafc89 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -0,0 +1,1237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Gameforce Ace"; + chassis-type = "handset"; + compatible = "gameforce,ace", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + button-vol-up { + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + }; + + /* Joystick range values based on hardware observation. */ + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + #address-cells = <1>; + io-channels = <&saradc 2>, <&saradc 3>, + <&saradc 4>, <&saradc 5>; + poll-interval = <60>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RX>; + }; + + axis@1 { + reg = <1>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RY>; + }; + + axis@2 { + reg = <2>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_X>; + }; + }; + + /* Trigger range values based on hardware observation. */ + adc_triggers: adc-trigger { + compatible = "adc-joystick"; + #address-cells = <1>; + io-channels = <&ti_adc 6>, + <&ti_adc 7>; + poll-interval = <60>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <890 1530>; + linux,code = <ABS_HAT2X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <1010 1550>; + linux,code = <ABS_HAT2Y>; + }; + }; + + amp_headphone: headphone-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&headphone_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Headphones Amplifier"; + }; + + amp_speaker: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&vcc5v0_spk>; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_detect>; + pinctrl-names = "default"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "rockchip,es8388-codec"; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lcd_bl_en>; + pinctrl-names = "default"; + pwms = <&pwm13 0 25000 PWM_POLARITY_INVERTED>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3700000>; + constant-charge-current-max-microamp = <2500000>; + constant-charge-voltage-max-microvolt = <8750000>; + voltage-min-design-microvolt = <7400000>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-home { + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "FUNCTION"; + linux,code = <BTN_MODE>; + }; + + button-l1 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "L1"; + linux,code = <BTN_TL>; + }; + + button-left { + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-menu { + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; + label = "HOME"; + linux,code = <KEY_HOME>; + }; + + button-r1 { + gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + label = "R1"; + linux,code = <BTN_TR>; + }; + + button-right { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + }; + + red_led: led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; + + pwm_fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 120 150 180 210 240 255>; + fan-supply = <&vcc5v0_sys>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB2 IRQ_TYPE_EDGE_RISING>; + pulses-per-revolution = <4>; + pwms = <&pwm12 0 50000 PWM_POLARITY_INVERTED>; + }; + + pwm_gpio33: pwm-33 { + compatible = "pwm-gpio"; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_right_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + pwm_gpio132: pwm-132 { + compatible = "pwm-gpio"; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_left_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clock-names = "ext_clock"; + clocks = <&rtc_hym8563>; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lcd0_n: vcc3v3-lcd0-n-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3_s3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sd_s0_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_spk: vcc5v0-spk-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_spk_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_spk"; + vin-supply = <&vcc5v0_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + }; + + vibrator_l: vibrator-l { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio132 0 20000000 0>; + }; + + vibrator_r: vibrator-r { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio33 0 20000000 0>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c3 { + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>, <&touch_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + touchscreen-swapped-x-y; + }; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m2_xfer>; + status = "okay"; + + ti_adc: adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #io-channel-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + }; + + channel@5 { + reg = <5>; + }; + + channel@6 { + reg = <6>; + }; + + channel@7 { + reg = <7>; + }; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + rtc_hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&hym8563_int>, <&clk32k_in>; + pinctrl-names = "default"; + wakeup-source; + }; + + /* Battery profile from BSP device tree. */ + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + + cellwise,battery-profile = /bits/ 8 + <0x18 0x0A 0x76 0x6A 0x6A 0x6A 0x68 0x66 + 0x62 0x5E 0x5A 0x58 0x5F 0x59 0x46 0x3D + 0x35 0x2D 0x28 0x21 0x29 0x38 0x44 0x50 + 0x1A 0x85 0x07 0xAE 0x14 0x28 0x48 0x56 + 0x66 0x66 0x66 0x6A 0x3E 0x1A 0x6C 0x3D + 0x09 0x38 0x1A 0x49 0x7B 0x96 0xA2 0x15 + 0x3B 0x77 0x9A 0xB1 0x80 0x87 0xB0 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&battery>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + assigned-clock-rates = <12288000>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s3>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + DVDD-supply = <&vcc_1v8_s3>; + HPVDD-supply = <&vcc_3v3_s3>; + PVDD-supply = <&vcc_1v8_s3>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&package_fan0>; + cooling-device = <&pwm_fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&package_fan1>; + cooling-device = <&pwm_fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +/* + * Attempts to use an M.2 SATA in this slot worked intermittently + * with the correct nodes enabled in device-tree, but eventually + * resulted in a destroyed board. Advise caution. + */ +&pcie2x1l1 { + pinctrl-0 = <&pcie_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + hp_detect: headphone-detect { + rockchip,pins = + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + charger { + charger_int_h: charger-int-h { + rockchip,pins = + <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + boost_enable_h: boost-enable-h { + rockchip,pins = + <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd_bl_en { + lcd_bl_en: lcd-bl-en { + rockchip,pins = + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie-pins { + pcie_rst: pcie-rst { + rockchip,pins = + <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd-pwr { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = + <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + spk-pwr { + vcc5v0_spk_pwr: vcc5v0-spk-pwr { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_rst: touch-rst { + rockchip,pins = + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vibrator { + vib_left_h: vib-left-h { + rockchip,pins = + <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vib_right_h: vib-right-h { + rockchip,pins = + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm12 { + pinctrl-0 = <&pwm12m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-0 = <&pwm13m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + sd-uhs-sdr104; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-0 = <&wifi_host_wake_irq>; + pinctrl-names = "default"; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + #address-cells = <1>; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <675000>; + regulator-name = "vdd_logic_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_vdenc_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <837500>; + regulator-min-microvolt = <837500>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc_hym8563>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_l>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + }; +}; -- 2.34.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace 2024-08-29 20:45 ` Chris Morgan @ 2024-08-30 16:33 ` Rob Herring (Arm) -1 siblings, 0 replies; 14+ messages in thread From: Rob Herring (Arm) @ 2024-08-30 16:33 UTC (permalink / raw) To: Chris Morgan Cc: zzc, andyshrk, heiko, jonas, linux-rockchip, Chris Morgan, jagan, krzk+dt, devicetree, conor+dt On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > based gaming device with a 1080p display, touchscreen, hall effect > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > and support for a 2242 NVME. > > Changes since V1: > - Update eMMC changes to note proper authorship. > - Removed cw2015 changes for dual cell configuration. For the moment > it's just cosmetic (aside from voltage_now reading incorrectly, no > other issues were observed). > - Removed USB bindings because vbus regulator isn't ready yet. > > Alex Zhao (1): > arm64: dts: rockchip: rk3588s fix sdio pins to pull up > > Chris Morgan (2): > dt-bindings: arm: rockchip: Add GameForce Ace > arm64: dts: rockchip: Add GameForce Ace > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ > 4 files changed, 1248 insertions(+), 5 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > -- > 2.34.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240829204517.398669-1-macroalpha82@gmail.com: arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: video-codec@fdb50000: compatible: 'oneOf' conditional failed, one must be fixed: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] is too long 'rockchip,rk3588-vpu121' is not one of ['rockchip,rk3036-vpu', 'rockchip,rk3066-vpu', 'rockchip,rk3288-vpu', 'rockchip,rk3328-vpu', 'rockchip,rk3399-vpu', 'rockchip,px30-vpu', 'rockchip,rk3568-vpu', 'rockchip,rk3588-av1-vpu'] 'rockchip,rk3188-vpu' was expected 'rockchip,rk3228-vpu' was expected 'rockchip,rk3066-vpu' was expected 'rockchip,rk3399-vpu' was expected from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdb50000: failed to match any schema with compatible: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba0000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba4000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba8000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdbac000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace @ 2024-08-30 16:33 ` Rob Herring (Arm) 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring (Arm) @ 2024-08-30 16:33 UTC (permalink / raw) To: Chris Morgan Cc: zzc, andyshrk, heiko, jonas, linux-rockchip, Chris Morgan, jagan, krzk+dt, devicetree, conor+dt On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > based gaming device with a 1080p display, touchscreen, hall effect > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > and support for a 2242 NVME. > > Changes since V1: > - Update eMMC changes to note proper authorship. > - Removed cw2015 changes for dual cell configuration. For the moment > it's just cosmetic (aside from voltage_now reading incorrectly, no > other issues were observed). > - Removed USB bindings because vbus regulator isn't ready yet. > > Alex Zhao (1): > arm64: dts: rockchip: rk3588s fix sdio pins to pull up > > Chris Morgan (2): > dt-bindings: arm: rockchip: Add GameForce Ace > arm64: dts: rockchip: Add GameForce Ace > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ > 4 files changed, 1248 insertions(+), 5 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > -- > 2.34.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240829204517.398669-1-macroalpha82@gmail.com: arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: video-codec@fdb50000: compatible: 'oneOf' conditional failed, one must be fixed: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] is too long 'rockchip,rk3588-vpu121' is not one of ['rockchip,rk3036-vpu', 'rockchip,rk3066-vpu', 'rockchip,rk3288-vpu', 'rockchip,rk3328-vpu', 'rockchip,rk3399-vpu', 'rockchip,px30-vpu', 'rockchip,rk3568-vpu', 'rockchip,rk3588-av1-vpu'] 'rockchip,rk3188-vpu' was expected 'rockchip,rk3228-vpu' was expected 'rockchip,rk3066-vpu' was expected 'rockchip,rk3399-vpu' was expected from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdb50000: failed to match any schema with compatible: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba0000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba4000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba8000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdbac000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace 2024-08-30 16:33 ` Rob Herring (Arm) @ 2024-08-30 18:49 ` Heiko Stübner -1 siblings, 0 replies; 14+ messages in thread From: Heiko Stübner @ 2024-08-30 18:49 UTC (permalink / raw) To: Chris Morgan, Rob Herring (Arm) Cc: zzc, andyshrk, jonas, linux-rockchip, Chris Morgan, jagan, krzk+dt, devicetree, conor+dt Am Freitag, 30. August 2024, 18:33:50 CEST schrieb Rob Herring (Arm): > > On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > > based gaming device with a 1080p display, touchscreen, hall effect > > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > > and support for a 2242 NVME. > > > > Changes since V1: > > - Update eMMC changes to note proper authorship. > > - Removed cw2015 changes for dual cell configuration. For the moment > > it's just cosmetic (aside from voltage_now reading incorrectly, no > > other issues were observed). > > - Removed USB bindings because vbus regulator isn't ready yet. > > > > Alex Zhao (1): > > arm64: dts: rockchip: rk3588s fix sdio pins to pull up > > > > Chris Morgan (2): > > dt-bindings: arm: rockchip: Add GameForce Ace > > arm64: dts: rockchip: Add GameForce Ace > > > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ > > 4 files changed, 1248 insertions(+), 5 deletions(-) > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > > > -- > > 2.34.1 > > > > > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240829204517.398669-1-macroalpha82@gmail.com: > > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: video-codec@fdb50000: compatible: 'oneOf' conditional failed, one must be fixed: > ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] is too long > 'rockchip,rk3588-vpu121' is not one of ['rockchip,rk3036-vpu', 'rockchip,rk3066-vpu', 'rockchip,rk3288-vpu', 'rockchip,rk3328-vpu', 'rockchip,rk3399-vpu', 'rockchip,px30-vpu', 'rockchip,rk3568-vpu', 'rockchip,rk3588-av1-vpu'] > 'rockchip,rk3188-vpu' was expected > 'rockchip,rk3228-vpu' was expected > 'rockchip,rk3066-vpu' was expected > 'rockchip,rk3399-vpu' was expected > from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdb50000: failed to match any schema with compatible: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba0000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba4000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba8000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdbac000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] That is not Chris' fault ;-) . The relevant vpu binding patches have made it to the media-tree [0], but not linux-next yet it seems. So this should sort itself shortly I hope. [0] https://git.linuxtv.org/media_stage.git/commit/?id=1e490a1ea64396b98db8c233360093e264b0c10b for ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] https://git.linuxtv.org/media_stage.git/commit/?id=b92346d2dba0048bfce7114225250bef73f83ad2 for ['rockchip,rk3588-vepu121'] _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace @ 2024-08-30 18:49 ` Heiko Stübner 0 siblings, 0 replies; 14+ messages in thread From: Heiko Stübner @ 2024-08-30 18:49 UTC (permalink / raw) To: Chris Morgan, Rob Herring (Arm) Cc: zzc, andyshrk, jonas, linux-rockchip, Chris Morgan, jagan, krzk+dt, devicetree, conor+dt Am Freitag, 30. August 2024, 18:33:50 CEST schrieb Rob Herring (Arm): > > On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > > based gaming device with a 1080p display, touchscreen, hall effect > > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > > and support for a 2242 NVME. > > > > Changes since V1: > > - Update eMMC changes to note proper authorship. > > - Removed cw2015 changes for dual cell configuration. For the moment > > it's just cosmetic (aside from voltage_now reading incorrectly, no > > other issues were observed). > > - Removed USB bindings because vbus regulator isn't ready yet. > > > > Alex Zhao (1): > > arm64: dts: rockchip: rk3588s fix sdio pins to pull up > > > > Chris Morgan (2): > > dt-bindings: arm: rockchip: Add GameForce Ace > > arm64: dts: rockchip: Add GameForce Ace > > > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +- > > .../dts/rockchip/rk3588s-gameforce-ace.dts | 1237 +++++++++++++++++ > > 4 files changed, 1248 insertions(+), 5 deletions(-) > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts > > > > -- > > 2.34.1 > > > > > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y rockchip/rk3588s-gameforce-ace.dtb' for 20240829204517.398669-1-macroalpha82@gmail.com: > > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: video-codec@fdb50000: compatible: 'oneOf' conditional failed, one must be fixed: > ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] is too long > 'rockchip,rk3588-vpu121' is not one of ['rockchip,rk3036-vpu', 'rockchip,rk3066-vpu', 'rockchip,rk3288-vpu', 'rockchip,rk3328-vpu', 'rockchip,rk3399-vpu', 'rockchip,px30-vpu', 'rockchip,rk3568-vpu', 'rockchip,rk3588-av1-vpu'] > 'rockchip,rk3188-vpu' was expected > 'rockchip,rk3228-vpu' was expected > 'rockchip,rk3066-vpu' was expected > 'rockchip,rk3399-vpu' was expected > from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdb50000: failed to match any schema with compatible: ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba0000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba4000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdba8000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] > arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dtb: /video-codec@fdbac000: failed to match any schema with compatible: ['rockchip,rk3588-vepu121'] That is not Chris' fault ;-) . The relevant vpu binding patches have made it to the media-tree [0], but not linux-next yet it seems. So this should sort itself shortly I hope. [0] https://git.linuxtv.org/media_stage.git/commit/?id=1e490a1ea64396b98db8c233360093e264b0c10b for ['rockchip,rk3588-vpu121', 'rockchip,rk3568-vpu'] https://git.linuxtv.org/media_stage.git/commit/?id=b92346d2dba0048bfce7114225250bef73f83ad2 for ['rockchip,rk3588-vepu121'] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace 2024-08-29 20:45 ` Chris Morgan @ 2024-09-04 19:07 ` Heiko Stuebner -1 siblings, 0 replies; 14+ messages in thread From: Heiko Stuebner @ 2024-09-04 19:07 UTC (permalink / raw) To: linux-rockchip, Chris Morgan Cc: Heiko Stuebner, krzk+dt, devicetree, jagan, Chris Morgan, andyshrk, zzc, robh, jonas, conor+dt On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > based gaming device with a 1080p display, touchscreen, hall effect > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > and support for a 2242 NVME. > > [...] Applied, thanks! [1/3] arm64: dts: rockchip: rk3588s fix sdio pins to pull up commit: bd60cae2932cd123d867bf93bdadc4bf545fcdce [2/3] dt-bindings: arm: rockchip: Add GameForce Ace commit: 3e5be1d7e7ef3dc5413e774e580f0c2d14aa6755 [3/3] arm64: dts: rockchip: Add GameForce Ace commit: 4e946c447a043c88b5db38501f3af174989dcc94 Best regards, -- Heiko Stuebner <heiko@sntech.de> _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V2 0/3] Add GameForce Ace @ 2024-09-04 19:07 ` Heiko Stuebner 0 siblings, 0 replies; 14+ messages in thread From: Heiko Stuebner @ 2024-09-04 19:07 UTC (permalink / raw) To: linux-rockchip, Chris Morgan Cc: Heiko Stuebner, krzk+dt, devicetree, jagan, Chris Morgan, andyshrk, zzc, robh, jonas, conor+dt On Thu, 29 Aug 2024 15:45:14 -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the GameForce Ace. The GameForce Ace is an RK3588s > based gaming device with a 1080p display, touchscreen, hall effect > joysticks and triggers, 128GB of eMMC, 8GB or 12GB of RAM, WiFi 5, > and support for a 2242 NVME. > > [...] Applied, thanks! [1/3] arm64: dts: rockchip: rk3588s fix sdio pins to pull up commit: bd60cae2932cd123d867bf93bdadc4bf545fcdce [2/3] dt-bindings: arm: rockchip: Add GameForce Ace commit: 3e5be1d7e7ef3dc5413e774e580f0c2d14aa6755 [3/3] arm64: dts: rockchip: Add GameForce Ace commit: 4e946c447a043c88b5db38501f3af174989dcc94 Best regards, -- Heiko Stuebner <heiko@sntech.de> ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2024-09-04 19:07 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-08-29 20:45 [PATCH V2 0/3] Add GameForce Ace Chris Morgan 2024-08-29 20:45 ` Chris Morgan 2024-08-29 20:45 ` [PATCH V2 1/3] arm64: dts: rockchip: rk3588s fix sdio pins to pull up Chris Morgan 2024-08-29 20:45 ` Chris Morgan 2024-08-29 20:45 ` [PATCH V2 2/3] dt-bindings: arm: rockchip: Add GameForce Ace Chris Morgan 2024-08-29 20:45 ` Chris Morgan 2024-08-29 20:45 ` [PATCH V2 3/3] arm64: dts: " Chris Morgan 2024-08-29 20:45 ` Chris Morgan 2024-08-30 16:33 ` [PATCH V2 0/3] " Rob Herring (Arm) 2024-08-30 16:33 ` Rob Herring (Arm) 2024-08-30 18:49 ` Heiko Stübner 2024-08-30 18:49 ` Heiko Stübner 2024-09-04 19:07 ` Heiko Stuebner 2024-09-04 19:07 ` Heiko Stuebner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.