All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: Matt Ranostay <mranostay@ti.com>,
	lpieralisi@kernel.org, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, krzysztof.kozlowski@linaro.org,
	vigneshr@ti.com, tjoseph@cadence.com,
	sergio.paracuellos@gmail.com, pthombar@cadence.com,
	linux-pci@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 3/5] PCI: j721e: Add PCIe 4x lane selection support
Date: Fri, 25 Nov 2022 14:31:11 +0200	[thread overview]
Message-ID: <23ecae8e-e4bf-60d9-1fa5-18894834d585@kernel.org> (raw)
In-Reply-To: <20221124081221.1206167-4-mranostay@ti.com>



On 24/11/2022 10:12, Matt Ranostay wrote:
> Add support for setting of two-bit field that allows selection of 4x lane
> PCIe which was previously limited to only 2x lanes.
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 8990f58d64d5..dab3db9be6d8 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -42,7 +42,6 @@ enum link_status {
>  };
>  
>  #define J721E_MODE_RC			BIT(7)
> -#define LANE_COUNT_MASK			BIT(8)
>  #define LANE_COUNT(n)			((n) << 8)
>  
>  #define GENERATION_SEL_MASK		GENMASK(1, 0)
> @@ -52,6 +51,7 @@ struct j721e_pcie {
>  	struct clk		*refclk;
>  	u32			mode;
>  	u32			num_lanes;
> +	u32			max_lanes;
>  	void __iomem		*user_cfg_base;
>  	void __iomem		*intd_cfg_base;
>  	u32			linkdown_irq_regfield;
> @@ -205,11 +205,15 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
>  {
>  	struct device *dev = pcie->cdns_pcie->dev;
>  	u32 lanes = pcie->num_lanes;
> +	u32 mask = GENMASK(8, 8);

u32 mask = BIT(8);

>  	u32 val = 0;
>  	int ret;
>  
> +	if (pcie->max_lanes == 4)
> +		mask = GENMASK(9, 8);
> +
>  	val = LANE_COUNT(lanes - 1);
> -	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
> +	ret = regmap_update_bits(syscon, offset, mask, val);
>  	if (ret)
>  		dev_err(dev, "failed to set link count\n");
>  
> @@ -439,6 +443,8 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
>  	if (ret || num_lanes > data->max_lanes)
>  		num_lanes = 1;
> +
> +	pcie->max_lanes = data->max_lanes;
>  	pcie->num_lanes = num_lanes;
>  
>  	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)))

Reviewed-by: Roger Quadros <rogerq@kernel.org>

cheers,
-roger

WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@kernel.org>
To: Matt Ranostay <mranostay@ti.com>,
	lpieralisi@kernel.org, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, krzysztof.kozlowski@linaro.org,
	vigneshr@ti.com, tjoseph@cadence.com,
	sergio.paracuellos@gmail.com, pthombar@cadence.com,
	linux-pci@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 3/5] PCI: j721e: Add PCIe 4x lane selection support
Date: Fri, 25 Nov 2022 14:31:11 +0200	[thread overview]
Message-ID: <23ecae8e-e4bf-60d9-1fa5-18894834d585@kernel.org> (raw)
In-Reply-To: <20221124081221.1206167-4-mranostay@ti.com>



On 24/11/2022 10:12, Matt Ranostay wrote:
> Add support for setting of two-bit field that allows selection of 4x lane
> PCIe which was previously limited to only 2x lanes.
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 8990f58d64d5..dab3db9be6d8 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -42,7 +42,6 @@ enum link_status {
>  };
>  
>  #define J721E_MODE_RC			BIT(7)
> -#define LANE_COUNT_MASK			BIT(8)
>  #define LANE_COUNT(n)			((n) << 8)
>  
>  #define GENERATION_SEL_MASK		GENMASK(1, 0)
> @@ -52,6 +51,7 @@ struct j721e_pcie {
>  	struct clk		*refclk;
>  	u32			mode;
>  	u32			num_lanes;
> +	u32			max_lanes;
>  	void __iomem		*user_cfg_base;
>  	void __iomem		*intd_cfg_base;
>  	u32			linkdown_irq_regfield;
> @@ -205,11 +205,15 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
>  {
>  	struct device *dev = pcie->cdns_pcie->dev;
>  	u32 lanes = pcie->num_lanes;
> +	u32 mask = GENMASK(8, 8);

u32 mask = BIT(8);

>  	u32 val = 0;
>  	int ret;
>  
> +	if (pcie->max_lanes == 4)
> +		mask = GENMASK(9, 8);
> +
>  	val = LANE_COUNT(lanes - 1);
> -	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
> +	ret = regmap_update_bits(syscon, offset, mask, val);
>  	if (ret)
>  		dev_err(dev, "failed to set link count\n");
>  
> @@ -439,6 +443,8 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
>  	if (ret || num_lanes > data->max_lanes)
>  		num_lanes = 1;
> +
> +	pcie->max_lanes = data->max_lanes;
>  	pcie->num_lanes = num_lanes;
>  
>  	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)))

Reviewed-by: Roger Quadros <rogerq@kernel.org>

cheers,
-roger

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-25 12:31 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-24  8:12 [PATCH v7 0/5] PCI: add 4x lane support for pci-j721e controllers Matt Ranostay
2022-11-24  8:12 ` Matt Ranostay
2022-11-24  8:12 ` [PATCH v7 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes Matt Ranostay
2022-11-24  8:12   ` Matt Ranostay
2022-11-26 14:30   ` Krzysztof Kozlowski
2022-11-26 14:30     ` Krzysztof Kozlowski
2022-11-24  8:12 ` [PATCH v7 2/5] PCI: j721e: Add per platform maximum lane settings Matt Ranostay
2022-11-24  8:12   ` Matt Ranostay
2022-11-25 12:27   ` Roger Quadros
2022-11-25 12:27     ` Roger Quadros
2022-11-24  8:12 ` [PATCH v7 3/5] PCI: j721e: Add PCIe 4x lane selection support Matt Ranostay
2022-11-24  8:12   ` Matt Ranostay
2022-11-25 12:31   ` Roger Quadros [this message]
2022-11-25 12:31     ` Roger Quadros
2023-02-02 16:09   ` Lorenzo Pieralisi
2023-02-02 16:09     ` Lorenzo Pieralisi
2022-11-24  8:12 ` [PATCH v7 4/5] dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings Matt Ranostay
2022-11-24  8:12   ` Matt Ranostay
2022-11-26 14:30   ` Krzysztof Kozlowski
2022-11-26 14:30     ` Krzysztof Kozlowski
2022-11-24  8:12 ` [PATCH v7 5/5] PCI: j721e: add j784s4 PCIe configuration Matt Ranostay
2022-11-24  8:12   ` Matt Ranostay
2022-11-25 12:32   ` Roger Quadros
2022-11-25 12:32     ` Roger Quadros
2022-11-25 20:08   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=23ecae8e-e4bf-60d9-1fa5-18894834d585@kernel.org \
    --to=rogerq@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mranostay@ti.com \
    --cc=pthombar@cadence.com \
    --cc=robh@kernel.org \
    --cc=sergio.paracuellos@gmail.com \
    --cc=tjoseph@cadence.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.