From: Santosh Shilimkar <santosh.shilimkar@ti.com>
To: jean.pihet@newoldbits.com, linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com,
linux-arm-kernel@lists.infradead.org,
Jean Pihet-XID <j-pihet@ti.com>
Subject: RE: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
Date: Fri, 17 Dec 2010 10:18:39 +0530 [thread overview]
Message-ID: <252f6bd3f3d077d771418d374eee173d@mail.gmail.com> (raw)
In-Reply-To: <1292521858-3810-3-git-send-email-j-pihet@ti.com>
> -----Original Message-----
> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
> owner@vger.kernel.org] On Behalf Of jean.pihet@newoldbits.com
> Sent: Thursday, December 16, 2010 11:21 PM
> To: linux-omap@vger.kernel.org
> Cc: khilman@deeprootsystems.com; linux-arm-kernel@lists.infradead.org;
> Jean Pihet
> Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
>
> From: Jean Pihet <j-pihet@ti.com>
>
> The SRAM PA addresses are locally defined and used in both the
> SRAM management code and the idle sleep code.
> A global macro defines the values at a centralized place, for
> easier maintenance.
>
> Tested on N900 and Beagleboard with full RET and OFF modes,
> using cpuidle and suspend.
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
> ---
> arch/arm/mach-omap2/sdrc.h | 7 +++++++
> arch/arm/plat-omap/sram.c | 7 ++-----
> 2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 68f57bb..ada596b 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -74,5 +74,12 @@ static inline u32 sms_read_reg(u16 reg)
> */
> #define SDRC_MPURATE_LOOPS 96
>
> +/*
> + * OMAP2+: define the SRAM PA addresses.
> + * Used by the SRAM management code and the idle sleep code.
> + */
> +#define OMAP2_SRAM_PA 0x40200000
> +#define OMAP3_SRAM_PA 0x40200000
> +#define OMAP4_SRAM_PA 0x40300000
>
Header choice is wrong. Certainly SDRC is not the place.
Right place should be "#include <plat/sram.h>"
OMAP4 doesn't even have SDRC IP
> #endif
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 819ea0c..1a686c8 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -41,15 +41,12 @@
>
> #define OMAP1_SRAM_PA 0x20000000
> #define OMAP1_SRAM_VA VMALLOC_END
> -#define OMAP2_SRAM_PA 0x40200000
> -#define OMAP2_SRAM_PUB_PA 0x4020f800
> +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
> #define OMAP2_SRAM_VA 0xfe400000
> #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
> -#define OMAP3_SRAM_PA 0x40200000
> #define OMAP3_SRAM_VA 0xfe400000
> -#define OMAP3_SRAM_PUB_PA 0x40208000
> +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
> #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
> -#define OMAP4_SRAM_PA 0x40300000
> #define OMAP4_SRAM_VA 0xfe400000
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
Date: Fri, 17 Dec 2010 10:18:39 +0530 [thread overview]
Message-ID: <252f6bd3f3d077d771418d374eee173d@mail.gmail.com> (raw)
In-Reply-To: <1292521858-3810-3-git-send-email-j-pihet@ti.com>
> -----Original Message-----
> From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
> owner at vger.kernel.org] On Behalf Of jean.pihet at newoldbits.com
> Sent: Thursday, December 16, 2010 11:21 PM
> To: linux-omap at vger.kernel.org
> Cc: khilman at deeprootsystems.com; linux-arm-kernel at lists.infradead.org;
> Jean Pihet
> Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
>
> From: Jean Pihet <j-pihet@ti.com>
>
> The SRAM PA addresses are locally defined and used in both the
> SRAM management code and the idle sleep code.
> A global macro defines the values at a centralized place, for
> easier maintenance.
>
> Tested on N900 and Beagleboard with full RET and OFF modes,
> using cpuidle and suspend.
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
> ---
> arch/arm/mach-omap2/sdrc.h | 7 +++++++
> arch/arm/plat-omap/sram.c | 7 ++-----
> 2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 68f57bb..ada596b 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -74,5 +74,12 @@ static inline u32 sms_read_reg(u16 reg)
> */
> #define SDRC_MPURATE_LOOPS 96
>
> +/*
> + * OMAP2+: define the SRAM PA addresses.
> + * Used by the SRAM management code and the idle sleep code.
> + */
> +#define OMAP2_SRAM_PA 0x40200000
> +#define OMAP3_SRAM_PA 0x40200000
> +#define OMAP4_SRAM_PA 0x40300000
>
Header choice is wrong. Certainly SDRC is not the place.
Right place should be "#include <plat/sram.h>"
OMAP4 doesn't even have SDRC IP
> #endif
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 819ea0c..1a686c8 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -41,15 +41,12 @@
>
> #define OMAP1_SRAM_PA 0x20000000
> #define OMAP1_SRAM_VA VMALLOC_END
> -#define OMAP2_SRAM_PA 0x40200000
> -#define OMAP2_SRAM_PUB_PA 0x4020f800
> +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
> #define OMAP2_SRAM_VA 0xfe400000
> #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
> -#define OMAP3_SRAM_PA 0x40200000
> #define OMAP3_SRAM_VA 0xfe400000
> -#define OMAP3_SRAM_PUB_PA 0x40208000
> +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
> #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
> -#define OMAP4_SRAM_PA 0x40300000
> #define OMAP4_SRAM_VA 0xfe400000
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-12-17 4:48 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-16 17:50 [PATCH 0/7 v4] OMAP3: clean up ASM sleep code jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 1/7] OMAP3: remove unused code from the " jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-17 4:48 ` Santosh Shilimkar [this message]
2010-12-17 4:48 ` Santosh Shilimkar
2010-12-17 10:13 ` Jean Pihet
2010-12-17 10:13 ` Jean Pihet
2010-12-16 17:50 ` [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 4/7] OMAP3: re-organize " jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-17 5:04 ` Santosh Shilimkar
2010-12-17 5:04 ` Santosh Shilimkar
2010-12-17 10:14 ` Jean Pihet
2010-12-17 10:14 ` Jean Pihet
2010-12-16 17:50 ` [PATCH 6/7] OMAP3: add comments for low power code errata jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-16 17:50 ` [PATCH 7/7] OMAP3: ASM sleep code format rework jean.pihet
2010-12-16 17:50 ` jean.pihet at newoldbits.com
2010-12-17 5:09 ` Santosh Shilimkar
2010-12-17 5:09 ` Santosh Shilimkar
2010-12-17 10:16 ` Jean Pihet
2010-12-17 10:16 ` Jean Pihet
2010-12-16 18:26 ` [PATCH 0/7 v4] OMAP3: clean up ASM sleep code Tony Lindgren
2010-12-16 18:26 ` Tony Lindgren
2010-12-17 5:05 ` Santosh Shilimkar
2010-12-17 5:05 ` Santosh Shilimkar
2010-12-17 10:18 ` Jean Pihet
2010-12-17 10:18 ` Jean Pihet
2010-12-17 10:20 ` Santosh Shilimkar
2010-12-17 10:20 ` Santosh Shilimkar
-- strict thread matches above, loose matches on Subject: below --
2010-12-17 10:08 [PATCH 0/7 v5] " jean.pihet
2010-12-17 10:08 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet
2010-12-17 10:08 ` jean.pihet at newoldbits.com
2010-12-17 10:36 ` Santosh Shilimkar
2010-12-17 10:36 ` Santosh Shilimkar
2010-12-17 13:34 ` Nishanth Menon
2010-12-17 13:34 ` Nishanth Menon
2010-12-17 14:59 ` Jean Pihet
2010-12-17 14:59 ` Jean Pihet
2010-12-17 15:00 ` Nishanth Menon
2010-12-17 15:00 ` Nishanth Menon
2010-12-18 15:44 [PATCH 0/7 v6] OMAP3: clean up ASM sleep code jean.pihet
2010-12-18 15:44 ` [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses jean.pihet
2010-12-18 15:44 ` jean.pihet at newoldbits.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=252f6bd3f3d077d771418d374eee173d@mail.gmail.com \
--to=santosh.shilimkar@ti.com \
--cc=j-pihet@ti.com \
--cc=jean.pihet@newoldbits.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.