All of lore.kernel.org
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] ARM: rockchip: add smp functionality
Date: Wed, 15 Jan 2014 22:40:02 +0100	[thread overview]
Message-ID: <27256277.YJ687suYy5@phil> (raw)

This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.

To achieve this, add the scu, the needed sram and power-management-unit.

Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).

changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
  memory instead of the valid ranges", so go back to the mmio-sram-reserved
  property originally suggested by Rob Herring

changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
  marking reserved regions to marking available regions - hopefully
  I got the usage right 
- remove __CPUINIT as suggested by Fabio Estevam

changes since v3:
- address comments from Rob Herring:
  - split the gathering of the reserve-data into a separate loop
  - spelling and style fixes
- first patch only included for reference, already part of the
  char-misc git tree

changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel

changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
  sram nodes
- the sram content is kept intact while the device is running, so
  copying the trampoline is only needed once


Heiko Stuebner (6):
  dt-bindings: sram: describe option to reserve parts of the memory
  misc: sram: implement mmio-sram-reserved option
  ARM: rockchip: add snoop-control-unit
  ARM: rockchip: add sram dt nodes and documentation
  ARM: rockchip: add power-management-unit
  ARM: rockchip: add smp bringup code

 .../devicetree/bindings/arm/rockchip/pmu.txt       |   16 ++
 .../devicetree/bindings/arm/rockchip/smp-sram.txt  |   23 +++
 Documentation/devicetree/bindings/misc/sram.txt    |    8 +
 arch/arm/boot/dts/rk3066a.dtsi                     |    6 +
 arch/arm/boot/dts/rk3188.dtsi                      |    6 +
 arch/arm/boot/dts/rk3xxx.dtsi                      |   10 +
 arch/arm/mach-rockchip/Kconfig                     |    1 +
 arch/arm/mach-rockchip/Makefile                    |    1 +
 arch/arm/mach-rockchip/core.h                      |   22 +++
 arch/arm/mach-rockchip/headsmp.S                   |   30 +++
 arch/arm/mach-rockchip/platsmp.c                   |  208 ++++++++++++++++++++
 arch/arm/mach-rockchip/rockchip.c                  |    2 +
 drivers/misc/sram.c                                |  118 ++++++++++-
 13 files changed, 443 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
 create mode 100644 arch/arm/mach-rockchip/core.h
 create mode 100644 arch/arm/mach-rockchip/headsmp.S
 create mode 100644 arch/arm/mach-rockchip/platsmp.c

-- 
1.7.10.4

WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: "linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Pawel Moll <pawel.moll@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	linux-kernel@vger.kernel.org, arm@kernel.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Grant Likely <grant.likely@linaro.org>
Subject: [PATCH v6 0/6] ARM: rockchip: add smp functionality
Date: Wed, 15 Jan 2014 22:40:02 +0100	[thread overview]
Message-ID: <27256277.YJ687suYy5@phil> (raw)

This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.

To achieve this, add the scu, the needed sram and power-management-unit.

Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).

changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
  memory instead of the valid ranges", so go back to the mmio-sram-reserved
  property originally suggested by Rob Herring

changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
  marking reserved regions to marking available regions - hopefully
  I got the usage right 
- remove __CPUINIT as suggested by Fabio Estevam

changes since v3:
- address comments from Rob Herring:
  - split the gathering of the reserve-data into a separate loop
  - spelling and style fixes
- first patch only included for reference, already part of the
  char-misc git tree

changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel

changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
  sram nodes
- the sram content is kept intact while the device is running, so
  copying the trampoline is only needed once


Heiko Stuebner (6):
  dt-bindings: sram: describe option to reserve parts of the memory
  misc: sram: implement mmio-sram-reserved option
  ARM: rockchip: add snoop-control-unit
  ARM: rockchip: add sram dt nodes and documentation
  ARM: rockchip: add power-management-unit
  ARM: rockchip: add smp bringup code

 .../devicetree/bindings/arm/rockchip/pmu.txt       |   16 ++
 .../devicetree/bindings/arm/rockchip/smp-sram.txt  |   23 +++
 Documentation/devicetree/bindings/misc/sram.txt    |    8 +
 arch/arm/boot/dts/rk3066a.dtsi                     |    6 +
 arch/arm/boot/dts/rk3188.dtsi                      |    6 +
 arch/arm/boot/dts/rk3xxx.dtsi                      |   10 +
 arch/arm/mach-rockchip/Kconfig                     |    1 +
 arch/arm/mach-rockchip/Makefile                    |    1 +
 arch/arm/mach-rockchip/core.h                      |   22 +++
 arch/arm/mach-rockchip/headsmp.S                   |   30 +++
 arch/arm/mach-rockchip/platsmp.c                   |  208 ++++++++++++++++++++
 arch/arm/mach-rockchip/rockchip.c                  |    2 +
 drivers/misc/sram.c                                |  118 ++++++++++-
 13 files changed, 443 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
 create mode 100644 arch/arm/mach-rockchip/core.h
 create mode 100644 arch/arm/mach-rockchip/headsmp.S
 create mode 100644 arch/arm/mach-rockchip/platsmp.c

-- 
1.7.10.4

WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: "linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>
Cc: arm@kernel.org, Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robherring2@gmail.com>,
	devicetree@vger.kernel.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>
Subject: [PATCH v6 0/6] ARM: rockchip: add smp functionality
Date: Wed, 15 Jan 2014 22:40:02 +0100	[thread overview]
Message-ID: <27256277.YJ687suYy5@phil> (raw)

This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.

To achieve this, add the scu, the needed sram and power-management-unit.

Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).

changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
  memory instead of the valid ranges", so go back to the mmio-sram-reserved
  property originally suggested by Rob Herring

changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
  marking reserved regions to marking available regions - hopefully
  I got the usage right 
- remove __CPUINIT as suggested by Fabio Estevam

changes since v3:
- address comments from Rob Herring:
  - split the gathering of the reserve-data into a separate loop
  - spelling and style fixes
- first patch only included for reference, already part of the
  char-misc git tree

changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel

changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
  sram nodes
- the sram content is kept intact while the device is running, so
  copying the trampoline is only needed once


Heiko Stuebner (6):
  dt-bindings: sram: describe option to reserve parts of the memory
  misc: sram: implement mmio-sram-reserved option
  ARM: rockchip: add snoop-control-unit
  ARM: rockchip: add sram dt nodes and documentation
  ARM: rockchip: add power-management-unit
  ARM: rockchip: add smp bringup code

 .../devicetree/bindings/arm/rockchip/pmu.txt       |   16 ++
 .../devicetree/bindings/arm/rockchip/smp-sram.txt  |   23 +++
 Documentation/devicetree/bindings/misc/sram.txt    |    8 +
 arch/arm/boot/dts/rk3066a.dtsi                     |    6 +
 arch/arm/boot/dts/rk3188.dtsi                      |    6 +
 arch/arm/boot/dts/rk3xxx.dtsi                      |   10 +
 arch/arm/mach-rockchip/Kconfig                     |    1 +
 arch/arm/mach-rockchip/Makefile                    |    1 +
 arch/arm/mach-rockchip/core.h                      |   22 +++
 arch/arm/mach-rockchip/headsmp.S                   |   30 +++
 arch/arm/mach-rockchip/platsmp.c                   |  208 ++++++++++++++++++++
 arch/arm/mach-rockchip/rockchip.c                  |    2 +
 drivers/misc/sram.c                                |  118 ++++++++++-
 13 files changed, 443 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
 create mode 100644 arch/arm/mach-rockchip/core.h
 create mode 100644 arch/arm/mach-rockchip/headsmp.S
 create mode 100644 arch/arm/mach-rockchip/platsmp.c

-- 
1.7.10.4



             reply	other threads:[~2014-01-15 21:40 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15 21:40 Heiko Stübner [this message]
2014-01-15 21:40 ` [PATCH v6 0/6] ARM: rockchip: add smp functionality Heiko Stübner
2014-01-15 21:40 ` Heiko Stübner
2014-01-15 21:40 ` [PATCH v6 1/6] dt-bindings: sram: describe option to reserve parts of the memory Heiko Stübner
2014-01-15 21:40   ` Heiko Stübner
2014-01-16 14:36   ` Rob Herring
2014-01-16 14:36     ` Rob Herring
2014-01-16 14:36     ` Rob Herring
2014-01-15 21:41 ` [PATCH v6 2/6] misc: sram: implement mmio-sram-reserved option Heiko Stübner
2014-01-15 21:41   ` Heiko Stübner
2014-01-16 12:45   ` Mark Rutland
2014-01-16 12:45     ` Mark Rutland
2014-01-16 18:04     ` [PATCH] of: add function to count number of u32 elements in a property Heiko Stübner
2014-01-16 18:04       ` Heiko Stübner
2014-01-17 14:29       ` Rob Herring
2014-01-17 14:29         ` Rob Herring
2014-01-17 14:29         ` Rob Herring
2014-01-17 14:44       ` Mark Rutland
2014-01-17 14:44         ` Mark Rutland
2014-01-17 14:44         ` Mark Rutland
2014-01-17 15:44         ` [PATCH v2] of: add functions to count number of " Heiko Stübner
2014-01-17 15:44           ` Heiko Stübner
2014-01-17 15:44           ` Heiko Stübner
     [not found]           ` < CAL_JsqJ_St=OegpexzrTGXwmOYCz4YeWk_1S+R_q6NajmmPqSA@mail.gmail.com>
     [not found]             ` < 5115255.DrcMbtXc1P@phil>
     [not found]               ` < CAL_JsqJord1OOjwcKk1jqF5o+XO3uw+Lc4ATtQacgwZWAoQq1g@mail.gmail.com>
2014-01-17 16:53           ` Mark Rutland
2014-01-17 16:53             ` Mark Rutland
2014-01-17 16:53             ` Mark Rutland
2014-01-17 17:27             ` [PATCH v3] " Heiko Stübner
2014-01-17 17:27               ` Heiko Stübner
2014-01-17 17:27               ` Heiko Stübner
2014-01-17 17:42           ` [PATCH v2] " Rob Herring
2014-01-17 17:42             ` Rob Herring
2014-01-17 17:42             ` Rob Herring
2014-01-18 12:02             ` [PATCH v4] " Heiko Stübner
2014-01-18 12:02               ` Heiko Stübner
2014-01-18 12:02               ` Heiko Stübner
2014-01-18 15:07               ` Rob Herring
2014-01-18 15:07                 ` Rob Herring
2014-01-18 15:07                 ` Rob Herring
2014-01-18 15:28                 ` Heiko Stübner
2014-01-18 15:28                   ` Heiko Stübner
2014-01-18 15:28                   ` Heiko Stübner
2014-02-04 17:30                 ` Grant Likely
2014-02-04 17:30                   ` Grant Likely
2014-02-04 18:48                   ` Heiko Stübner
2014-02-04 18:48                     ` Heiko Stübner
2014-02-04 18:48                     ` Heiko Stübner
2014-02-05 12:06                     ` Grant Likely
2014-02-05 12:06                       ` Grant Likely
2014-02-05 12:45                       ` Heiko Stübner
2014-02-05 12:45                         ` Heiko Stübner
2014-02-05 12:45                         ` Heiko Stübner
2014-02-05 13:47                         ` Grant Likely
2014-02-05 13:47                           ` Grant Likely
2014-01-15 21:42 ` [PATCH v6 3/6] ARM: rockchip: add snoop-control-unit Heiko Stübner
2014-01-15 21:42   ` Heiko Stübner
2014-01-15 21:42 ` [PATCH v6 4/6] ARM: rockchip: add sram dt nodes and documentation Heiko Stübner
2014-01-15 21:42   ` Heiko Stübner
2014-01-15 21:43 ` [PATCH v6 5/6] ARM: rockchip: add power-management-unit Heiko Stübner
2014-01-15 21:43   ` Heiko Stübner
2014-01-15 21:43 ` [PATCH v6 6/6] ARM: rockchip: add smp bringup code Heiko Stübner
2014-01-15 21:43   ` Heiko Stübner
2014-01-15 21:43   ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=27256277.YJ687suYy5@phil \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.