[PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board

[Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>]

Regulators for MMC2 (SD card) are PVDD_TFLASH_2V8 (LDO19) for vmmc
and PVDD_APIO_MMCOFF_2V8 (LDO13) for vqmmc.  Currently the device
tree entry for MMC2 uses PVDD_PRE_1V8 (LDO10) for vmmc and vqmmc is
not specified.  Fix it.

Without this patch:
- "mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators"
  patch causes a SD card detection to fail
- "mmc: dw_mmc: Support voltage changes" patch causes a boot hang

This patch fixes both above problems.

Suggested-by: Doug Anderson <dianders@google.com>
Cc: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts	2014-10-02 15:44:53.014826886 +0200
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts	2014-10-02 17:35:24.110600398 +0200
@@ -74,7 +74,8 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		vmmc-supply = <&ldo10_reg>;
+		vmmc-supply = <&ldo19_reg>;
+		vqmmc-supply = <&ldo13_reg>;
 
 		slot@0 {
 			reg = <0>;