From: stefan@agner.ch (Stefan Agner)
To: linux-arm-kernel@lists.infradead.org
Subject: no irq domain found for ... a GPIO interrupt controller
Date: Wed, 17 Feb 2016 15:29:22 -0800 [thread overview]
Message-ID: <2dc0519827dc9d210e38c498d830cd97@agner.ch> (raw)
Hi Marc,
I get the following warning on our Vybrid based Colibri VF50 module:
[ 0.147674] irq: no irq domain found for
/soc/aips-bus at 40000000/gpio at 4004a000 !
The device tree arch/arm/boot/dts/vf500-colibri.dtsi uses the following
interrupt specification in a touchscreen node which seems to trigger the
issue:
interrupt-parent = <&gpio0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
We use other GPIO interrupts, but I guess it is a matter of
initialization order, and the above specification seems to be parsed
before the GPIO interrupt-controller gets created...?
It seems that Rob Herring addressed a similar issue a while ago in
9ec36ca ("of/irq: do irq resolution in platform_get_irq")
Is this problem known?
Currently, the device does not get any interrupts. The interrupt seems
to be requested successfully at probe time later, so I am not sure if
the not working device is really related to the message above....
This is a stack trace when I add a WARN_ON(1) in
irq_create_fwspec_mapping:
[ 0.147674] irq: no irq domain found for
/soc/aips-bus at 40000000/gpio at 4004a000 !
[ 0.147823] ------------[ cut here ]------------
[ 0.147941] WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:584
irq_create_fwspec_mapping+0xf0/0x1e4()
[ 0.148056] Modules linked in:
[ 0.148142] CPU: 0 PID: 1 Comm: swapper Not tainted
4.4.0-00070-g3690255-dirty #764
[ 0.148246] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 0.148311] Backtrace:
[ 0.148416] [<80013498>] (dump_backtrace) from [<80013690>]
(show_stack+0x18/0x1c)
[ 0.148521] r7:800539f4 r6:00000248 r5:00000009 r4:00000000
[ 0.148646] [<80013678>] (show_stack) from [<8029d070>]
(dump_stack+0x24/0x28)
[ 0.148782] [<8029d04c>] (dump_stack) from [<800219a4>]
(warn_slowpath_common+0x88/0xb4)
[ 0.148916] [<8002191c>] (warn_slowpath_common) from [<80021a74>]
(warn_slowpath_null+0x24/0x2c)
[ 0.149021] r8:00000000 r7:87cf0f88 r6:87cf0f88 r5:00000000
r4:87843ca8
[ 0.149158] [<80021a50>] (warn_slowpath_null) from [<800539f4>]
(irq_create_fwspec_mapping+0xf0/0x1e4)
[ 0.149294] [<80053904>] (irq_create_fwspec_mapping) from
[<80053b44>] (irq_create_of_mapping+0x5c/0x64)
[ 0.149400] r6:87cf0f88 r5:878bb7c0 r4:00000000
[ 0.149508] [<80053ae8>] (irq_create_of_mapping) from [<8045e934>]
(irq_of_parse_and_map+0x2c/0x34)
[ 0.149633] [<8045e908>] (irq_of_parse_and_map) from [<8045e95c>]
(of_irq_to_resource+0x20/0xc4)
[ 0.149755] [<8045e93c>] (of_irq_to_resource) from [<8045ea44>]
(of_irq_to_resource_table+0x44/0x54)
[ 0.149859] r8:00000001 r7:00000001 r6:87cf0f88 r5:878bb7dc
r4:00000000
[ 0.149990] [<8045ea00>] (of_irq_to_resource_table) from [<8045c5b0>]
(of_device_alloc+0x114/0x184)
[ 0.150097] r7:00000000 r6:878be800 r5:87cf0f88 r4:00000000
[ 0.150339] [<8045c49c>] (of_device_alloc) from [<8045c678>]
(of_platform_device_create_pdata+0x58/0xd4)
[ 0.150457] r10:00000000 r9:00000000 r8:80650628 r7:00000000
r6:00000000 r5:87cf0f88
[ 0.150600] r4:00000000
[ 0.150688] [<8045c620>] (of_platform_device_create_pdata) from
[<8045c800>] (of_platform_bus_create+0xf0/0x194)
[ 0.150796] r7:00000001 r6:00000000 r5:87cf0f88 r4:00000000
[ 0.150912] [<8045c710>] (of_platform_bus_create) from [<8045c9e0>]
(of_platform_populate+0x64/0xc0)
[ 0.151016] r10:00000000 r9:00000001 r8:00000000 r7:00000000
r6:80650628 r5:87ce34f4
[ 0.151152] r4:87cf0f88
[ 0.151244] [<8045c97c>] (of_platform_populate) from [<80806fa8>]
(vf610_init_machine+0x24/0x2c)
[ 0.151352] r9:807ff5ec r8:000000b0 r7:87896600 r6:80840420
r5:80801a48 r4:80840420
[ 0.151515] [<80806f84>] (vf610_init_machine) from [<80801a70>]
(customize_machine+0x28/0x48)
[ 0.151640] [<80801a48>] (customize_machine) from [<800095fc>]
(do_one_initcall+0x98/0x1e0)
[ 0.151763] [<80009564>] (do_one_initcall) from [<807ffe34>]
(kernel_init_freeable+0x13c/0x1e0)
[ 0.151867] r10:8082b824 r9:807ff5ec r8:000000b0 r7:8086e440
r6:8086e440 r5:00000003
[ 0.152004] r4:80838704
[ 0.152091] [<807ffcf8>] (kernel_init_freeable) from [<805ee93c>]
(kernel_init+0x18/0xf0)
[ 0.152197] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:805ee924
[ 0.152333] r4:8086e440
[ 0.152424] [<805ee924>] (kernel_init) from [<8000f878>]
(ret_from_fork+0x14/0x3c)
[ 0.152526] r5:805ee924 r4:00000000
[ 0.152670] ---[ end trace c2d84d5af0139987 ]---
--
Stefan
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Agner <stefan@agner.ch>
To: marc.zyngier@arm.com
Cc: jiang.liu@linux.intel.com,
Sanchayan Maity <maitysanchayan@gmail.com>,
robh@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: no irq domain found for ... a GPIO interrupt controller
Date: Wed, 17 Feb 2016 15:29:22 -0800 [thread overview]
Message-ID: <2dc0519827dc9d210e38c498d830cd97@agner.ch> (raw)
Hi Marc,
I get the following warning on our Vybrid based Colibri VF50 module:
[ 0.147674] irq: no irq domain found for
/soc/aips-bus@40000000/gpio@4004a000 !
The device tree arch/arm/boot/dts/vf500-colibri.dtsi uses the following
interrupt specification in a touchscreen node which seems to trigger the
issue:
interrupt-parent = <&gpio0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
We use other GPIO interrupts, but I guess it is a matter of
initialization order, and the above specification seems to be parsed
before the GPIO interrupt-controller gets created...?
It seems that Rob Herring addressed a similar issue a while ago in
9ec36ca ("of/irq: do irq resolution in platform_get_irq")
Is this problem known?
Currently, the device does not get any interrupts. The interrupt seems
to be requested successfully at probe time later, so I am not sure if
the not working device is really related to the message above....
This is a stack trace when I add a WARN_ON(1) in
irq_create_fwspec_mapping:
[ 0.147674] irq: no irq domain found for
/soc/aips-bus@40000000/gpio@4004a000 !
[ 0.147823] ------------[ cut here ]------------
[ 0.147941] WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:584
irq_create_fwspec_mapping+0xf0/0x1e4()
[ 0.148056] Modules linked in:
[ 0.148142] CPU: 0 PID: 1 Comm: swapper Not tainted
4.4.0-00070-g3690255-dirty #764
[ 0.148246] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 0.148311] Backtrace:
[ 0.148416] [<80013498>] (dump_backtrace) from [<80013690>]
(show_stack+0x18/0x1c)
[ 0.148521] r7:800539f4 r6:00000248 r5:00000009 r4:00000000
[ 0.148646] [<80013678>] (show_stack) from [<8029d070>]
(dump_stack+0x24/0x28)
[ 0.148782] [<8029d04c>] (dump_stack) from [<800219a4>]
(warn_slowpath_common+0x88/0xb4)
[ 0.148916] [<8002191c>] (warn_slowpath_common) from [<80021a74>]
(warn_slowpath_null+0x24/0x2c)
[ 0.149021] r8:00000000 r7:87cf0f88 r6:87cf0f88 r5:00000000
r4:87843ca8
[ 0.149158] [<80021a50>] (warn_slowpath_null) from [<800539f4>]
(irq_create_fwspec_mapping+0xf0/0x1e4)
[ 0.149294] [<80053904>] (irq_create_fwspec_mapping) from
[<80053b44>] (irq_create_of_mapping+0x5c/0x64)
[ 0.149400] r6:87cf0f88 r5:878bb7c0 r4:00000000
[ 0.149508] [<80053ae8>] (irq_create_of_mapping) from [<8045e934>]
(irq_of_parse_and_map+0x2c/0x34)
[ 0.149633] [<8045e908>] (irq_of_parse_and_map) from [<8045e95c>]
(of_irq_to_resource+0x20/0xc4)
[ 0.149755] [<8045e93c>] (of_irq_to_resource) from [<8045ea44>]
(of_irq_to_resource_table+0x44/0x54)
[ 0.149859] r8:00000001 r7:00000001 r6:87cf0f88 r5:878bb7dc
r4:00000000
[ 0.149990] [<8045ea00>] (of_irq_to_resource_table) from [<8045c5b0>]
(of_device_alloc+0x114/0x184)
[ 0.150097] r7:00000000 r6:878be800 r5:87cf0f88 r4:00000000
[ 0.150339] [<8045c49c>] (of_device_alloc) from [<8045c678>]
(of_platform_device_create_pdata+0x58/0xd4)
[ 0.150457] r10:00000000 r9:00000000 r8:80650628 r7:00000000
r6:00000000 r5:87cf0f88
[ 0.150600] r4:00000000
[ 0.150688] [<8045c620>] (of_platform_device_create_pdata) from
[<8045c800>] (of_platform_bus_create+0xf0/0x194)
[ 0.150796] r7:00000001 r6:00000000 r5:87cf0f88 r4:00000000
[ 0.150912] [<8045c710>] (of_platform_bus_create) from [<8045c9e0>]
(of_platform_populate+0x64/0xc0)
[ 0.151016] r10:00000000 r9:00000001 r8:00000000 r7:00000000
r6:80650628 r5:87ce34f4
[ 0.151152] r4:87cf0f88
[ 0.151244] [<8045c97c>] (of_platform_populate) from [<80806fa8>]
(vf610_init_machine+0x24/0x2c)
[ 0.151352] r9:807ff5ec r8:000000b0 r7:87896600 r6:80840420
r5:80801a48 r4:80840420
[ 0.151515] [<80806f84>] (vf610_init_machine) from [<80801a70>]
(customize_machine+0x28/0x48)
[ 0.151640] [<80801a48>] (customize_machine) from [<800095fc>]
(do_one_initcall+0x98/0x1e0)
[ 0.151763] [<80009564>] (do_one_initcall) from [<807ffe34>]
(kernel_init_freeable+0x13c/0x1e0)
[ 0.151867] r10:8082b824 r9:807ff5ec r8:000000b0 r7:8086e440
r6:8086e440 r5:00000003
[ 0.152004] r4:80838704
[ 0.152091] [<807ffcf8>] (kernel_init_freeable) from [<805ee93c>]
(kernel_init+0x18/0xf0)
[ 0.152197] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:805ee924
[ 0.152333] r4:8086e440
[ 0.152424] [<805ee924>] (kernel_init) from [<8000f878>]
(ret_from_fork+0x14/0x3c)
[ 0.152526] r5:805ee924 r4:00000000
[ 0.152670] ---[ end trace c2d84d5af0139987 ]---
--
Stefan
next reply other threads:[~2016-02-17 23:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 23:29 Stefan Agner [this message]
2016-02-17 23:29 ` no irq domain found for ... a GPIO interrupt controller Stefan Agner
2016-02-18 9:14 ` Marc Zyngier
2016-02-18 9:14 ` Marc Zyngier
2016-02-18 16:13 ` Stefan Agner
2016-02-18 16:13 ` Stefan Agner
2016-02-18 16:43 ` Marc Zyngier
2016-02-18 16:43 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2dc0519827dc9d210e38c498d830cd97@agner.ch \
--to=stefan@agner.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.