From: Krzysztof Kozlowski <krzk@kernel.org>
To: Zhentao Guo <zhentao.guo@amlogic.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder
Date: Tue, 29 Sep 2026 07:40:42 +0200 [thread overview]
Message-ID: <33499600-5df7-48fb-a2ac-5a703df8dc2d@kernel.org> (raw)
In-Reply-To: <7fe35ef7-e894-4137-975a-9a5f621a8156@amlogic.com>
On 29/09/2026 04:59, Zhentao Guo wrote:
> Hi Krzysztof,
>
>> On Thu, Sep 24, 2026 at 03:55:10PM +0800, Zhentao Guo wrote:
>>> Add bindings for Amlogic hardware decoder accelerator.
>>>
>>> Signed-off-by: Zhentao Guo <zhentao.guo@amlogic.com>
>>> ---
>>> .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 114 +++++++++++++++++++++
>>> 1 file changed, 114 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>>> new file mode 100644
>>> index 000000000000..751043c3d9cc
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>>> @@ -0,0 +1,114 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Amlogic Video Decode Accelerator
>>> +
>>> +maintainers:
>>> + - Zhentao Guo <zhentao.guo@amlogic.com>
>>> +
>>> +description:
>>> + The Video Decoder Accelerator present on Amlogic SOCs.
>>> + It supports stateless h264 decoding.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: amlogic,s4-vdec
>>> +
>>> + reg:
>>> + minItems: 2
>> What is happening here? Previous version was different.
>
> maxItems: 2 implies that a single items is also allowed,but the hardware actually requires at least two register regions (dos
Since when?
> and dmc) to work, so minItems:2 makes sense here.
>
> The same applies to |power-domain| and |interrupts| below. At least 2
> power-domains to make the hardware work, and at least 2 interrupts
> needed for the two sub-cores.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Zhentao Guo <zhentao.guo@amlogic.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder
Date: Tue, 29 Sep 2026 07:40:42 +0200 [thread overview]
Message-ID: <33499600-5df7-48fb-a2ac-5a703df8dc2d@kernel.org> (raw)
In-Reply-To: <7fe35ef7-e894-4137-975a-9a5f621a8156@amlogic.com>
On 29/09/2026 04:59, Zhentao Guo wrote:
> Hi Krzysztof,
>
>> On Thu, Sep 24, 2026 at 03:55:10PM +0800, Zhentao Guo wrote:
>>> Add bindings for Amlogic hardware decoder accelerator.
>>>
>>> Signed-off-by: Zhentao Guo <zhentao.guo@amlogic.com>
>>> ---
>>> .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 114 +++++++++++++++++++++
>>> 1 file changed, 114 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>>> new file mode 100644
>>> index 000000000000..751043c3d9cc
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>>> @@ -0,0 +1,114 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Amlogic Video Decode Accelerator
>>> +
>>> +maintainers:
>>> + - Zhentao Guo <zhentao.guo@amlogic.com>
>>> +
>>> +description:
>>> + The Video Decoder Accelerator present on Amlogic SOCs.
>>> + It supports stateless h264 decoding.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: amlogic,s4-vdec
>>> +
>>> + reg:
>>> + minItems: 2
>> What is happening here? Previous version was different.
>
> maxItems: 2 implies that a single items is also allowed,but the hardware actually requires at least two register regions (dos
Since when?
> and dmc) to work, so minItems:2 makes sense here.
>
> The same applies to |power-domain| and |interrupts| below. At least 2
> power-domains to make the hardware work, and at least 2 interrupts
> needed for the two sub-cores.
Best regards,
Krzysztof
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-09-29 5:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 7:55 [PATCH v10 0/6] Add Amlogic stateless H.264 video decoder for S4 Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` [PATCH v10 1/6] firmware: meson: sm: video firmware loading via secure monitor Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` [PATCH v10 2/6] firmware: meson: sm: Add video firmware loading SMC call Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 8:01 ` sashiko-bot
2026-09-24 8:01 ` sashiko-bot
2026-09-28 10:58 ` Krzysztof Kozlowski
2026-09-28 10:58 ` Krzysztof Kozlowski
2026-09-29 2:59 ` Zhentao Guo
2026-09-29 2:59 ` Zhentao Guo
2026-09-29 5:40 ` Krzysztof Kozlowski [this message]
2026-09-29 5:40 ` Krzysztof Kozlowski
2026-09-29 5:57 ` Zhentao Guo
2026-09-29 5:57 ` Zhentao Guo
2026-09-29 6:00 ` Krzysztof Kozlowski
2026-09-29 6:00 ` Krzysztof Kozlowski
2026-09-29 6:23 ` Zhentao Guo
2026-09-29 6:23 ` Zhentao Guo
2026-09-29 6:36 ` Krzysztof Kozlowski
2026-09-29 6:36 ` Krzysztof Kozlowski
2026-09-29 8:21 ` Zhentao Guo
2026-09-29 8:21 ` Zhentao Guo
2026-09-29 8:25 ` Krzysztof Kozlowski
2026-09-29 8:25 ` Krzysztof Kozlowski
2026-09-29 9:41 ` Zhentao Guo
2026-09-29 9:41 ` Zhentao Guo
2026-09-24 7:55 ` [PATCH v10 4/6] decoder: Add V4L2 stateless H.264 decoder driver Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 8:16 ` sashiko-bot
2026-09-24 8:16 ` sashiko-bot
2026-09-24 7:55 ` [PATCH v10 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` [PATCH v10 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC Zhentao Guo
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
2026-09-24 7:55 ` Zhentao Guo via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=33499600-5df7-48fb-a2ac-5a703df8dc2d@kernel.org \
--to=krzk@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mchehab@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=zhentao.guo@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.