From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/11] ARM: dts: blanche: add Ethernet support
Date: Sat, 04 Jun 2016 00:37:37 +0300 [thread overview]
Message-ID: <3446158.3RAgrIF8O1@wasted.cogentembedded.com> (raw)
In-Reply-To: <3446154.oZ24315zaL@wasted.cogentembedded.com>
R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet
chip was used instead on the Blanche board; this chip is compatible with
SMSC LAN9115 for which there's a (device tree aware) driver. Describe
the chip in the Blanche device tree; enable DHCP and NFS root in the
kernel command line for the kernel booting.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
Changes in version 2:
- added Simon's ACK.
arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -29,6 +29,27 @@
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
+
+ d3_3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ethernet@18000000 {
+ compatible = "smsc,lan89218", "smsc,lan9115";
+ reg = <0 0x18000000 0 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
+ reg-io-width = <4>;
+ vddvario-supply = <&d3_3v>;
+ vdd33a-supply = <&d3_3v>;
+ };
};
&extal_clk {
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/11] ARM: dts: blanche: add Ethernet support
Date: Sat, 04 Jun 2016 00:37:37 +0300 [thread overview]
Message-ID: <3446158.3RAgrIF8O1@wasted.cogentembedded.com> (raw)
In-Reply-To: <3446154.oZ24315zaL@wasted.cogentembedded.com>
R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet
chip was used instead on the Blanche board; this chip is compatible with
SMSC LAN9115 for which there's a (device tree aware) driver. Describe
the chip in the Blanche device tree; enable DHCP and NFS root in the
kernel command line for the kernel booting.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
Changes in version 2:
- added Simon's ACK.
arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -29,6 +29,27 @@
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
+
+ d3_3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ethernet at 18000000 {
+ compatible = "smsc,lan89218", "smsc,lan9115";
+ reg = <0 0x18000000 0 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
+ reg-io-width = <4>;
+ vddvario-supply = <&d3_3v>;
+ vdd33a-supply = <&d3_3v>;
+ };
};
&extal_clk {
next prev parent reply other threads:[~2016-06-03 21:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-03 21:09 [PATCH v2 00/11] Add R8A7792/Blanche board support Sergei Shtylyov
2016-06-03 21:09 ` Sergei Shtylyov
2016-06-03 21:12 ` [PATCH v2 01/11] ARM: shmobile: r8a7792: add clock index macros Sergei Shtylyov
2016-06-03 21:12 ` Sergei Shtylyov
2016-06-03 21:16 ` [PATCH v2 02/11] ARM: shmobile: r8a7792: add power domain " Sergei Shtylyov
2016-06-03 21:20 ` [PATCH v2 03/11] soc: renesas: rcar-sysc: add R8A7792 support Sergei Shtylyov
2016-06-03 21:23 ` [PATCH v2 04/11] ARM: shmobile: r8a7792: basic SoC support Sergei Shtylyov
2016-06-03 21:23 ` Sergei Shtylyov
2016-06-03 21:26 ` [PATCH v2 05/11] ARM: dts: r8a7792: initial SoC device tree Sergei Shtylyov
2016-06-03 21:26 ` Sergei Shtylyov
2016-06-03 21:26 ` Sergei Shtylyov
2016-06-08 7:05 ` Geert Uytterhoeven
2016-06-08 7:05 ` Geert Uytterhoeven
2016-06-03 21:28 ` [PATCH v2 06/11] ARM: dts: r8a7792: add SYS-DMAC support Sergei Shtylyov
2016-06-03 21:28 ` Sergei Shtylyov
2016-06-03 21:28 ` Sergei Shtylyov
2016-06-03 21:30 ` [PATCH v2 07/11] ARM: dts: r8a7792: add [H]SCIF support Sergei Shtylyov
2016-06-03 21:30 ` Sergei Shtylyov
2016-06-03 21:30 ` Sergei Shtylyov
2016-06-03 21:31 ` [PATCH v2 08/11] ARM: dts: r8a7792: add IRQC support Sergei Shtylyov
2016-06-03 21:31 ` Sergei Shtylyov
2016-06-03 21:33 ` [PATCH v2 09/11] DT: arm: shmobile: document Blanche board Sergei Shtylyov
2016-06-03 21:35 ` [PATCH v2 10/11] ARM: dts: blanche: initial device tree Sergei Shtylyov
2016-06-03 21:35 ` Sergei Shtylyov
2016-06-06 19:03 ` Sergei Shtylyov
2016-06-06 19:03 ` Sergei Shtylyov
2016-06-03 21:37 ` Sergei Shtylyov [this message]
2016-06-03 21:37 ` [PATCH v2 11/11] ARM: dts: blanche: add Ethernet support Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3446158.3RAgrIF8O1@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.