From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jonathan Bakker <xc-racer2@live.ca>, alim.akhtar@samsung.com
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/7] ARM: dts: s5pv210: Split memory nodes to match spec
Date: Thu, 24 Mar 2022 12:23:11 +0100 [thread overview]
Message-ID: <377e97c2-03e4-bc74-595d-2f4dba7e142f@kernel.org> (raw)
In-Reply-To: <CY4PR04MB05671F31023376B0B7050C68CB189@CY4PR04MB0567.namprd04.prod.outlook.com>
On 23/03/2022 18:05, Jonathan Bakker wrote:
>
>
> On 2022-03-23 8:06 a.m., Krzysztof Kozlowski wrote:
>> On 23/03/2022 15:59, Jonathan Bakker wrote:
>>> Hi Krzysztof,
>>>
>>> On 2022-03-23 3:54 a.m., Krzysztof Kozlowski wrote:
>>>> On 22/03/2022 21:11, Jonathan Bakker wrote:
>>>>> Memory nodes should only have a singular reg property in them, so
>>>>> split the memory nodes such that there is only per node.
>>>>>
>>>>> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
>>>>> ---
>>>>> arch/arm/boot/dts/s5pv210-aquila.dts | 8 ++++++--
>>>>> arch/arm/boot/dts/s5pv210-aries.dtsi | 14 +++++++++++---
>>>>> arch/arm/boot/dts/s5pv210-goni.dts | 14 +++++++++++---
>>>>> 3 files changed, 28 insertions(+), 8 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> index 6423348034b6..6984479ddba3 100644
>>>>> --- a/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> +++ b/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> @@ -29,8 +29,12 @@
>>>>>
>>>>> memory@30000000 {
>>>>> device_type = "memory";
>>>>> - reg = <0x30000000 0x05000000
>>>>> - 0x40000000 0x18000000>;
>>>>> + reg = <0x30000000 0x05000000>;
>>>>> + };
>>>>> +
>>>>> + memory@40000000 {
>>>>> + device_type = "memory";
>>>>> + reg = <0x40000000 0x18000000>;
>>>>> };
>>>>>
>>>>> pmic_ap_clk: clock-0 {
>>>>> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> index 160f8cd9a68d..70ff56daf4cb 100644
>>>>> --- a/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> @@ -24,9 +24,17 @@
>>>>>
>>>>> memory@30000000 {
>>>>> device_type = "memory";
>>>>> - reg = <0x30000000 0x05000000
>>>>> - 0x40000000 0x10000000
>>>>> - 0x50000000 0x08000000>;
>>>>
>>>> 0x40000000 to 0x58000000 is continues, so I wonder why it is split? Look
>>>> at Aquila DTS.
>>>>
>>>>
>>>
>>> Yes, it was split in the vendor kernel as well [1], and that's been continued along
>>> here. I personally don't see a reason to keep it split, but there might be something
>>> I'm not aware of.
>>>
>>
>> I guess they wanted maybe to express the physical banks. Fine with me.
>> Just your explanation is not entirely correct:
>>> Memory nodes should only have a singular reg property in them,
>> one reg but it can have multiple items. Why do think multiple reg items
>> is not allowed?
>>
>
> I was basing it off of this warning when running make dtbs_check
>
> rch/arm/boot/dts/s5pv210-aquila.dt.yaml: /: memory@30000000:reg:0: [805306368, 83886080, 1073741824, 402653184] is too long
> From schema: /home/jon/.local/lib/python3.7/site-packages/dtschema/schemas/reg.yaml
>
> and this solved the warning, booted, and I still had the correct
> amount of memory.
>
> Would
>
> memory@30000000 {
> device_type = "memory";
> reg = <0x30000000 0x05000000>,
> <0x40000000 0x18000000>;
> };
>
> be equally correct? (untested).
Yes, this one should be correct.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jonathan Bakker <xc-racer2@live.ca>, alim.akhtar@samsung.com
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/7] ARM: dts: s5pv210: Split memory nodes to match spec
Date: Thu, 24 Mar 2022 12:23:11 +0100 [thread overview]
Message-ID: <377e97c2-03e4-bc74-595d-2f4dba7e142f@kernel.org> (raw)
In-Reply-To: <CY4PR04MB05671F31023376B0B7050C68CB189@CY4PR04MB0567.namprd04.prod.outlook.com>
On 23/03/2022 18:05, Jonathan Bakker wrote:
>
>
> On 2022-03-23 8:06 a.m., Krzysztof Kozlowski wrote:
>> On 23/03/2022 15:59, Jonathan Bakker wrote:
>>> Hi Krzysztof,
>>>
>>> On 2022-03-23 3:54 a.m., Krzysztof Kozlowski wrote:
>>>> On 22/03/2022 21:11, Jonathan Bakker wrote:
>>>>> Memory nodes should only have a singular reg property in them, so
>>>>> split the memory nodes such that there is only per node.
>>>>>
>>>>> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
>>>>> ---
>>>>> arch/arm/boot/dts/s5pv210-aquila.dts | 8 ++++++--
>>>>> arch/arm/boot/dts/s5pv210-aries.dtsi | 14 +++++++++++---
>>>>> arch/arm/boot/dts/s5pv210-goni.dts | 14 +++++++++++---
>>>>> 3 files changed, 28 insertions(+), 8 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> index 6423348034b6..6984479ddba3 100644
>>>>> --- a/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> +++ b/arch/arm/boot/dts/s5pv210-aquila.dts
>>>>> @@ -29,8 +29,12 @@
>>>>>
>>>>> memory@30000000 {
>>>>> device_type = "memory";
>>>>> - reg = <0x30000000 0x05000000
>>>>> - 0x40000000 0x18000000>;
>>>>> + reg = <0x30000000 0x05000000>;
>>>>> + };
>>>>> +
>>>>> + memory@40000000 {
>>>>> + device_type = "memory";
>>>>> + reg = <0x40000000 0x18000000>;
>>>>> };
>>>>>
>>>>> pmic_ap_clk: clock-0 {
>>>>> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> index 160f8cd9a68d..70ff56daf4cb 100644
>>>>> --- a/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
>>>>> @@ -24,9 +24,17 @@
>>>>>
>>>>> memory@30000000 {
>>>>> device_type = "memory";
>>>>> - reg = <0x30000000 0x05000000
>>>>> - 0x40000000 0x10000000
>>>>> - 0x50000000 0x08000000>;
>>>>
>>>> 0x40000000 to 0x58000000 is continues, so I wonder why it is split? Look
>>>> at Aquila DTS.
>>>>
>>>>
>>>
>>> Yes, it was split in the vendor kernel as well [1], and that's been continued along
>>> here. I personally don't see a reason to keep it split, but there might be something
>>> I'm not aware of.
>>>
>>
>> I guess they wanted maybe to express the physical banks. Fine with me.
>> Just your explanation is not entirely correct:
>>> Memory nodes should only have a singular reg property in them,
>> one reg but it can have multiple items. Why do think multiple reg items
>> is not allowed?
>>
>
> I was basing it off of this warning when running make dtbs_check
>
> rch/arm/boot/dts/s5pv210-aquila.dt.yaml: /: memory@30000000:reg:0: [805306368, 83886080, 1073741824, 402653184] is too long
> From schema: /home/jon/.local/lib/python3.7/site-packages/dtschema/schemas/reg.yaml
>
> and this solved the warning, booted, and I still had the correct
> amount of memory.
>
> Would
>
> memory@30000000 {
> device_type = "memory";
> reg = <0x30000000 0x05000000>,
> <0x40000000 0x18000000>;
> };
>
> be equally correct? (untested).
Yes, this one should be correct.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-24 11:23 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220322201144.20320-1-xc-racer2@live.ca>
2022-03-22 20:11 ` [PATCH 1/7] ARM: dts: s5pv210: Split memory nodes to match spec Jonathan Bakker
2022-03-22 20:11 ` Jonathan Bakker
2022-03-23 10:54 ` Krzysztof Kozlowski
2022-03-23 10:54 ` Krzysztof Kozlowski
2022-03-23 14:59 ` Jonathan Bakker
2022-03-23 14:59 ` Jonathan Bakker
2022-03-23 15:06 ` Krzysztof Kozlowski
2022-03-23 15:06 ` Krzysztof Kozlowski
2022-03-23 17:05 ` Jonathan Bakker
2022-03-23 17:05 ` Jonathan Bakker
2022-03-24 11:23 ` Krzysztof Kozlowski [this message]
2022-03-24 11:23 ` Krzysztof Kozlowski
2022-03-23 15:03 ` [PATCH 2/7] ARM: dts: s5pv210: Adjust I2S entries " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:14 ` Krzysztof Kozlowski
2022-03-23 15:14 ` Krzysztof Kozlowski
2022-03-23 15:15 ` Krzysztof Kozlowski
2022-03-23 15:15 ` Krzysztof Kozlowski
2022-03-23 17:24 ` Jonathan Bakker
2022-03-23 17:24 ` Jonathan Bakker
2022-03-24 11:49 ` Krzysztof Kozlowski
2022-03-24 11:49 ` Krzysztof Kozlowski
2023-04-21 9:44 ` Krzysztof Kozlowski
2023-04-21 9:44 ` Krzysztof Kozlowski
2023-05-03 2:33 ` Jonathan Bakker
2023-05-03 2:33 ` Jonathan Bakker
[not found] ` <20220323150311.26699-1-xc-racer2@live.ca>
2022-03-23 15:03 ` [PATCH 3/7] ARM: dts: s5pv210: Adjust DMA node names " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:03 ` [PATCH 4/7] ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:22 ` Krzysztof Kozlowski
2022-03-23 15:22 ` Krzysztof Kozlowski
2022-03-23 15:03 ` [PATCH 5/7] ARM: dts: s5pv210: Correct interrupt name for bluetooth " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:23 ` krzk
2022-03-23 15:23 ` krzk
2022-03-23 15:03 ` [PATCH 6/7] ARM: dts: s5pv210: Add charger regulator to max8998 " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:03 ` [PATCH 7/7] ARM: dts: s5pv210: Add charger support " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:31 ` krzk
2022-03-23 15:31 ` krzk
2022-03-23 17:20 ` Jonathan Bakker
2022-03-23 17:20 ` Jonathan Bakker
2022-03-24 11:47 ` Krzysztof Kozlowski
2022-03-24 11:47 ` Krzysztof Kozlowski
2022-03-25 2:23 ` Jonathan Bakker
2022-03-25 2:23 ` Jonathan Bakker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=377e97c2-03e4-bc74-595d-2f4dba7e142f@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xc-racer2@live.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.