[parisc-linux] Booting on J200

[parisc-linux] Booting on J200

[Carl Johnson]

I have built my own kernels and modified them some, but have also
used the prebuilt kernels, I have had no success figuring out
what hangs the kernel but anyhow, I will tell of my testing
of the 1999-10-19 and 1999-11-13. And Hopefully I will
recieve some help, _TIA_

--
1999-10-19: Hangs at transfering control to kernel

--
1999-11-13: Hnags after:

Transfering control to kernel. (At entry point 0x00010000)
kernel(0x00148C80, 0x00504010, 0x00148C80, 0x00016640)
Clear BSS 0x0011B048 --> 0x0013D384
Boot Loader: PA/Linux, maybe PALO
real_mode setup exiting

--
1999-11-17 CVS snapshot with some of my own modif. to try to solve
the hanging at real_mode.

__Will not build__

-- 
Carl Johnson

Re: [parisc-linux] Booting on J200

[Carl Johnson]

Thanks Helge:

I never said I looked at the obvious first! Poor planning/thinking
on my part. I did however about 2 secs before reading your post
did recompile a FRESH ("VIRGIN") source and did manipulate
the command line and get it to give me a Pengiun powered PA
with a shell!

Thanks Anyhow!

Helge Deller wrote:
> 
> Am Wed, 01 Dec 1999 schrieb Carl Johnson:
> > I have built my own kernels and modified them some, but have also
> > used the prebuilt kernels, I have had no success figuring out
> > what hangs the kernel but anyhow, I will tell of my testing
> > of the 1999-10-19 and 1999-11-13. And Hopefully I will
> > recieve some help, _TIA_
> >
> > --
> > 1999-10-19: Hangs at transfering control to kernel
> >
> > --
> > 1999-11-13: Hnags after:
> >
> > Transfering control to kernel. (At entry point 0x00010000)
> > kernel(0x00148C80, 0x00504010, 0x00148C80, 0x00016640)
> > Clear BSS 0x0011B048 --> 0x0013D384
> > Boot Loader: PA/Linux, maybe PALO
> > real_mode setup exiting
> >
> 
> Hello Carl,
> 
> Are you shure, that the outputs doesn´t go to the first COM-Port as default (in
> which case you would never see something more on the screen)...
> 
> Check /arch/parisc/boot/boot_code/ipl_c.c and search for " console=ttyS0 " ...
> You would have to modify this (console=tty0)  ** OR **  start the machine with
> "boot pri isl" and modify the command-line.
> 
> Helge Deller.

-- 
Carl Johnson