Antwort: Re: VxWorks bootloader & PowerQUICC II, Booting the kernel, 2nd

Antwort: Re: VxWorks bootloader & PowerQUICC II, Booting the kernel, 2nd

[Ruedi.Hofer]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 685 bytes --]

Hi Dan

I just noticed that your link points to a 8xx (PowerQuicc) directory!

Does vxhack work for an 8260 PowerQuicc II kernel or do you
suggest another solution? I need to boot Linux on a SBC8260
evaluation board...

\Ruedi






dan@mvista.com on 28.09.2000 17:02:04
An: Ruedi.Hofer@ascom.ch @ MailGate
Kopie: linuxppc-embedded@lists.linuxppc.org @ MailGate, kernel@linux01.hasler.ascom.ch @ MailGate
Thema: Re: VxWorks bootloader & PowerQUICC II, Booting the kernel


Ruedi.Hofer@ascom.ch wrote:

> Unfortunately, this link doesn't work anymore! Do you mind sending
> a copy of this file directly to me?

Sorry, try ftp.mvista.com/pub/Area51/ppc-8xx/vxhack.c


        -- Dan

Re: Antwort: Re: VxWorks bootloader & PowerQUICC II, Booting the kernel,2nd

[Dan Malek]

Ruedi.Hofer@ascom.ch wrote:

> I just noticed that your link points to a 8xx (PowerQuicc) directory!

It's all the same....just a place to put bits....

> Does vxhack work for an 8260 PowerQuicc II kernel or do you
> suggest another solution? I need to boot Linux on a SBC8260
> evaluation board...

I thought the one I put there was modified for the 8260, but would
also work on the 8xx.  I'll check it out.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/