* [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
@ 2002-02-13 18:18 Joël Soete
2002-02-15 4:48 ` Grant Grundler
0 siblings, 1 reply; 7+ messages in thread
From: Joël Soete @ 2002-02-13 18:18 UTC (permalink / raw)
To: Grant Grundler; +Cc: parisc-linux
[-- Attachment #1: Type: text/plain, Size: 1172 bytes --]
Hey Grant,
Sorry first for delay.
Sorry also if I desapoint you but "CONFIG_TULIP_MMIO=y" works for my b180
(afaik same HW than b132l+ but processor clock?) with last k-2.4.17-pa23:
...
RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0xf0fff000, 00:10:83:65:09:4B, IRQ
96.
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
...
trust me it is running.
Joel
PS: may .config file attached
(See attached file: config.tst)
**********************************************************************
This e-mail and any attachments to it may contain confidential information which is strictly intended for the use of the authorised recipient. If you have received this e-mail in error, please delete it and notify the sender by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************
[-- Attachment #2: config.tst --]
[-- Type: application/octet-stream, Size: 18177 bytes --]
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_PARISC=y
# CONFIG_UID16 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type
#
CONFIG_PA7100=y
# CONFIG_PA7200 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
#
# General options
#
# CONFIG_SMP is not set
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_KWDB is not set
CONFIG_IOMMU_CCIO=y
CONFIG_GSC=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y
CONFIG_PCI_NAMES=y
#
# General setup
#
CONFIG_HOTPLUG=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SOM=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
#
# Enterprise Volume Management System
#
CONFIG_EVMS=y
CONFIG_EVMS_LOCAL_DEV_MGR_PLUGIN=y
CONFIG_EVMS_DOS_PARTITION_PLUGIN=y
CONFIG_EVMS_SNAPSHOT_PLUGIN=y
CONFIG_EVMS_DRIVELINK_PLUGIN=y
CONFIG_EVMS_BBR_PLUGIN=y
CONFIG_EVMS_LVM_PLUGIN=y
CONFIG_EVMS_MD_PLUGIN=y
CONFIG_EVMS_MD_LINEAR_PERS=y
CONFIG_EVMS_MD_RAID0_PERS=y
CONFIG_EVMS_MD_RAID1_PERS=y
CONFIG_EVMS_AIX_PLUGIN=y
CONFIG_EVMS_OS2_PLUGIN=y
CONFIG_EVMS_ECR_PLUGIN=y
# CONFIG_EVMS_INFO_CRITICAL is not set
# CONFIG_EVMS_INFO_SERIOUS is not set
# CONFIG_EVMS_INFO_ERROR is not set
# CONFIG_EVMS_INFO_WARNING is not set
CONFIG_EVMS_INFO_DEFAULT=y
# CONFIG_EVMS_INFO_DETAILS is not set
# CONFIG_EVMS_INFO_DEBUG is not set
# CONFIG_EVMS_INFO_EXTRA is not set
# CONFIG_EVMS_INFO_ENTRY_EXIT is not set
# CONFIG_EVMS_INFO_EVERYTHING is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_LVM=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AHA1740=m
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_AM53C974=m
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_53C700_USE_CONSISTENT=y
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
CONFIG_SCSI_PCI2000=m
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI5010 is not set
CONFIG_NI52=m
# CONFIG_NI65 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
CONFIG_DE4X5=m
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=m
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_WINBOND_840=m
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_SK98LIN=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_GSC_PS2=y
CONFIG_HIL=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_GSC=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GENRTC=y
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_PCMCIA_SERIAL_CS is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_MINIX_FS=m
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_STI=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_STI=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FBCON=y
CONFIG_FBCON_FONT=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_SUN12x22=y
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
CONFIG_SOUND_HARMONY=y
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_DUMP=y
CONFIG_DUMP_COMPRESS_RLE=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
2002-02-13 18:18 Joël Soete
@ 2002-02-15 4:48 ` Grant Grundler
0 siblings, 0 replies; 7+ messages in thread
From: Grant Grundler @ 2002-02-15 4:48 UTC (permalink / raw)
To: Joël Soete; +Cc: parisc-linux
"=?iso-8859-1?Q?Jo=EBl_Soete?=" wrote:
> Sorry first for delay.
>
> Sorry also if I desapoint you but "CONFIG_TULIP_MMIO=y" works for my b180
> (afaik same HW than b132l+ but processor clock?) with last k-2.4.17-pa23:
Disappointed?! are you kidding?! This is great! :^)
> ...
> RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
> loop: loaded (max 8 devices)
> Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
> tulip0: no phy info, aborting mtable build
> tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
> eth0: Digital DS21143 Tulip rev 65 at 0xf0fff000, 00:10:83:65:09:4B, IRQ
> 96.
Is this output from B132L with card-mode Dino?
or with built-in 21143 on B180L?
Just curious....
thanks,
grant
^ permalink raw reply [flat|nested] 7+ messages in thread
* [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
@ 2002-02-15 6:46 Joël Soete
2002-02-15 6:55 ` Grant Grundler
0 siblings, 1 reply; 7+ messages in thread
From: Joël Soete @ 2002-02-15 6:46 UTC (permalink / raw)
To: Grant Grundler; +Cc: parisc-linux
Hi Grant,
> Disappointed?! are you kidding?! This is great! :^)
Nice ("disapointing" was just a joke) :-) )
>> ...
>> RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
>> tulip0: no phy info, aborting mtable build
>> tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
>> eth0: Digital DS21143 Tulip rev 65 at 0xf0fff000, 00:10:83:65:09:4B, IRQ
>> 96.
> Is this output from B132L with card-mode Dino?
> or with built-in 21143 on B180L?
It was "built-in 21143 on B180L" (is there a difference here between b180
and b132?)
Joel
=
=20
Grant Grundler =
=20
<grundler@dsl2.extern To: "Jo=EBl Soete" <js=
o@europay.com> =20
al.hp.com> cc: parisc-linux@lists=
.parisc-linux.org =20
Subject: Re: kernel-2.=
4.17-pa22 boot problem B132L+ with serial =20
15-02-02 05:48 AM =
=20
=
=20
=
=20
"=3D?iso-8859-1?Q?Jo=3DEBl_Soete?=3D" wrote:
> Sorry first for delay.
>
> Sorry also if I desapoint you but "CONFIG_TULIP_MMIO=3Dy" works for my b1=
80
> (afaik same HW than b132l+ but processor clock?) with last k-2.4.17-pa23:
Disappointed?! are you kidding?! This is great! :^)
> ...
> RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
> loop: loaded (max 8 devices)
> Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
> tulip0: no phy info, aborting mtable build
> tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
> eth0: Digital DS21143 Tulip rev 65 at 0xf0fff000, 00:10:83:65:09:4B, IRQ
> 96.
Is this output from B132L with card-mode Dino?
or with built-in 21143 on B180L?
Just curious....
thanks,
grant
**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient. If you=
have received this e-mail in error, please delete it and notify the sender=
by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************
^ permalink raw reply [flat|nested] 7+ messages in thread
* [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
2002-02-15 6:46 [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial Joël Soete
@ 2002-02-15 6:55 ` Grant Grundler
2002-02-15 11:25 ` Clement Moyroud
0 siblings, 1 reply; 7+ messages in thread
From: Grant Grundler @ 2002-02-15 6:55 UTC (permalink / raw)
To: Joël Soete; +Cc: parisc-linux
"=?iso-8859-1?Q?Jo=EBl_Soete?=" wrote:
> It was "built-in 21143 on B180L" (is there a difference here between b180
> and b132?)
Yes. I don't think B132L had 100BT built-in.
But I'm too lazy to check hwdb.parisc-linux.org right now.
Bed time.
grant
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
2002-02-15 6:55 ` Grant Grundler
@ 2002-02-15 11:25 ` Clement Moyroud
2002-02-15 17:44 ` Matthew Wilcox
0 siblings, 1 reply; 7+ messages in thread
From: Clement Moyroud @ 2002-02-15 11:25 UTC (permalink / raw)
To: Grant Grundler; +Cc: parisc-linux
Grant Grundler wrote:
>"=?iso-8859-1?Q?Jo=EBl_Soete?=" wrote:
>
>>It was "built-in 21143 on B180L" (is there a difference here between b180
>>and b132?)
>>
>
>Yes. I don't think B132L had 100BT built-in.
>But I'm too lazy to check hwdb.parisc-linux.org right now.
>Bed time.
>
B132L has 100BT built-in too.
btw, Grant, have you seen Thibaut's mail about out serial ports problems
on a B132L+ ?
Clement.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
2002-02-15 11:25 ` Clement Moyroud
@ 2002-02-15 17:44 ` Matthew Wilcox
0 siblings, 0 replies; 7+ messages in thread
From: Matthew Wilcox @ 2002-02-15 17:44 UTC (permalink / raw)
To: Clement Moyroud; +Cc: Grant Grundler, parisc-linux
On Fri, Feb 15, 2002 at 12:25:36PM +0100, Clement Moyroud wrote:
> btw, Grant, have you seen Thibaut's mail about out serial ports problems
> on a B132L+ ?
I haven't seen it. Are they swapped?
--
Revolutions do not require corporate support.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial
@ 2002-02-18 7:45 Joël Soete
0 siblings, 0 replies; 7+ messages in thread
From: Joël Soete @ 2002-02-18 7:45 UTC (permalink / raw)
To: Grant Grundler; +Cc: parisc-linux, willy
Hey all,
Regarding root login problem on serial link, I could not reproduce on my
B180.
May be a new apt-get diste-upgrade would help?
Joel
Notes;
Debian GNU/Linux 3.0 palinux ttyS0
palinux login: root
Password:
Last login: Fri Feb 15 10:35:16 2002 from wsjso:0.0 on pts/2
Linux palinux 2.4.17-pa23-lkcd-evms-0.9.0 #4 Thu Feb 14 14:19:07 CET 2002
parisc unknown
palinux:~# dpkg -l libc6
Desired=3DUnknown/Install/Remove/Purge/Hold
| Status=3DNot/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=3D(none)/Hold/Reinst-required/X=3Dboth-problems (Status,Err:
uppercase=3Dbad)
||/ Name Version Description
+++-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D-=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ii libc6 2.2.5-3 GNU C Library: Shared libraries and
Timezone
palinux:~#
And also with k pa26
Debian GNU/Linux 3.0 palinux ttyS0
palinux login: root
Password:
Last login: Mon Feb 18 08:30:39 2002 on ttyS0
Linux palinux 2.4.17-pa26 #2 Fri Feb 15 14:55:59 CET 2002 parisc unknown
palinux:~# ll /var/lib/dpkg/status
-rw-r--r-- 1 root root 273512 Feb 14 12:31
/var/lib/dpkg/status
palinux:~# date
Mon Feb 18 08:45:02 CET 2002
palinux:~#
=
=20
Grant Grundler =
=20
<grundler@dsl2.extern To: "Jo=EBl Soete" <js=
o@europay.com> =20
al.hp.com> cc: parisc-linux@lists=
.parisc-linux.org =20
Subject: Re: kernel-2.=
4.17-pa22 boot problem B132L+ with serial =20
15-02-02 07:55 AM =
=20
=
=20
=
=20
"=3D?iso-8859-1?Q?Jo=3DEBl_Soete?=3D" wrote:
> It was "built-in 21143 on B180L" (is there a difference here between b180
> and b132?)
Yes. I don't think B132L had 100BT built-in.
But I'm too lazy to check hwdb.parisc-linux.org right now.
Bed time.
grant
**********************************************************************
This e-mail and any attachments to it may contain confidential information =
which is strictly intended for the use of the authorised recipient. If you=
have received this e-mail in error, please delete it and notify the sender=
by replying to this e-mail.
Thank you for your co-operation.
**********************************************************************
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2002-02-18 7:39 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-15 6:46 [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial Joël Soete
2002-02-15 6:55 ` Grant Grundler
2002-02-15 11:25 ` Clement Moyroud
2002-02-15 17:44 ` Matthew Wilcox
-- strict thread matches above, loose matches on Subject: below --
2002-02-18 7:45 Joël Soete
2002-02-13 18:18 Joël Soete
2002-02-15 4:48 ` Grant Grundler
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.