* [BUG]2.5.49-ac1 - more info on make error
@ 2002-11-27 20:45 Bill Davidsen
2002-12-02 17:06 ` Randy.Dunlap
2002-12-02 18:22 ` Adrian Bunk
0 siblings, 2 replies; 8+ messages in thread
From: Bill Davidsen @ 2002-11-27 20:45 UTC (permalink / raw)
To: Linux-Kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 493 bytes --]
Knowing that modules are still broken, I changed all modules to be
built-in and dropped all support for modules and retried the compile. I
have disabled all but the features I really want to test on the new
kernel, so I will not be reducing the features any more.
--
bill davidsen, CTO TMR Associates, Inc <davidsen@tmr.com>
Having the feature freeze for Linux 2.5 on Hallow'een is appropriate,
since using 2.5 kernels includes a lot of things jumping out of dark
corners to scare you.
[-- Attachment #2: error message --]
[-- Type: APPLICATION/octet-stream, Size: 13865 bytes --]
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_MARK.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_MARK -DKBUILD_MODNAME=ipt_MARK -c -o net/ipv4/netfilter/ipt_MARK.o net/ipv4/netfilter/ipt_MARK.c
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_MASQUERADE.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_MASQUERADE -DKBUILD_MODNAME=ipt_MASQUERADE -c -o net/ipv4/netfilter/ipt_MASQUERADE.o net/ipv4/netfilter/ipt_MASQUERADE.c
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_REDIRECT.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_REDIRECT -DKBUILD_MODNAME=ipt_REDIRECT -c -o net/ipv4/netfilter/ipt_REDIRECT.o net/ipv4/netfilter/ipt_REDIRECT.c
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_LOG.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_LOG -DKBUILD_MODNAME=ipt_LOG -c -o net/ipv4/netfilter/ipt_LOG.o net/ipv4/netfilter/ipt_LOG.c
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_ULOG.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_ULOG -DKBUILD_MODNAME=ipt_ULOG -c -o net/ipv4/netfilter/ipt_ULOG.o net/ipv4/netfilter/ipt_ULOG.c
gcc -Wp,-MD,net/ipv4/netfilter/.ipt_TCPMSS.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=ipt_TCPMSS -DKBUILD_MODNAME=ipt_TCPMSS -c -o net/ipv4/netfilter/ipt_TCPMSS.o net/ipv4/netfilter/ipt_TCPMSS.c
ld -m elf_i386 -r -o net/ipv4/netfilter/ip_conntrack.o net/ipv4/netfilter/ip_conntrack_standalone.o net/ipv4/netfilter/ip_conntrack_core.o net/ipv4/netfilter/ip_conntrack_proto_generic.o net/ipv4/netfilter/ip_conntrack_proto_tcp.o net/ipv4/netfilter/ip_conntrack_proto_udp.o net/ipv4/netfilter/ip_conntrack_proto_icmp.o
ld -m elf_i386 -r -o net/ipv4/netfilter/built-in.o net/ipv4/netfilter/ip_conntrack.o net/ipv4/netfilter/ip_conntrack_ftp.o net/ipv4/netfilter/ip_conntrack_irc.o net/ipv4/netfilter/ip_nat_ftp.o net/ipv4/netfilter/ip_nat_irc.o net/ipv4/netfilter/ip_tables.o net/ipv4/netfilter/iptable_filter.o net/ipv4/netfilter/iptable_mangle.o net/ipv4/netfilter/iptable_nat.o net/ipv4/netfilter/ipt_helper.o net/ipv4/netfilter/ipt_limit.o net/ipv4/netfilter/ipt_mark.o net/ipv4/netfilter/ipt_mac.o net/ipv4/netfilter/ipt_pkttype.o net/ipv4/netfilter/ipt_multiport.o net/ipv4/netfilter/ipt_owner.o net/ipv4/netfilter/ipt_tos.o net/ipv4/netfilter/ipt_ecn.o net/ipv4/netfilter/ipt_dscp.o net/ipv4/netfilter/ipt_ah.o net/ipv4/netfilter/ipt_esp.o net/ipv4/netfilter/ipt_length.o net/ipv4/netfilter/ipt_ttl.o net/ipv4/netfilter/ipt_state.o net/ipv4/netfilter/ipt_conntrack.o net/ipv4/netfilter/ipt_unclean.o net/ipv4/netfilter/ipt_tcpmss.o net/ipv4/netfilter/ipt_REJECT.o net/ipv4/netfilter/ipt_MIRROR.o net/ipv4/netfilter/ipt_TOS.o net/ipv4/netfilter/ipt_ECN.o net/ipv4/netfilter/ipt_DSCP.o net/ipv4/netfilter/ipt_MARK.o net/ipv4/netfilter/ipt_MASQUERADE.o net/ipv4/netfilter/ipt_REDIRECT.o net/ipv4/netfilter/ipt_LOG.o net/ipv4/netfilter/ipt_ULOG.o net/ipv4/netfilter/ipt_TCPMSS.o
ld -m elf_i386 -r -o net/ipv4/built-in.o net/ipv4/utils.o net/ipv4/route.o net/ipv4/inetpeer.o net/ipv4/protocol.o net/ipv4/ip_input.o net/ipv4/ip_fragment.o net/ipv4/ip_forward.o net/ipv4/ip_options.o net/ipv4/ip_output.o net/ipv4/ip_sockglue.o net/ipv4/tcp.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o net/ipv4/tcp_timer.o net/ipv4/tcp_ipv4.o net/ipv4/tcp_minisocks.o net/ipv4/tcp_diag.o net/ipv4/raw.o net/ipv4/udp.o net/ipv4/arp.o net/ipv4/icmp.o net/ipv4/devinet.o net/ipv4/af_inet.o net/ipv4/igmp.o net/ipv4/sysctl_net_ipv4.o net/ipv4/fib_frontend.o net/ipv4/fib_semantics.o net/ipv4/fib_hash.o net/ipv4/proc.o net/ipv4/fib_rules.o net/ipv4/ip_nat_dumb.o net/ipv4/syncookies.o net/ipv4/ah.o net/ipv4/esp.o net/ipv4/netfilter/built-in.o net/ipv4/xfrm_user.o net/ipv4/xfrm_policy.o net/ipv4/xfrm_state.o net/ipv4/xfrm_input.o
ld -m elf_i386 -r -o net/built-in.o net/socket.o net/core/built-in.o net/ethernet/built-in.o net/802/built-in.o net/sched/built-in.o net/netlink/built-in.o net/ipv4/built-in.o net/unix/built-in.o net/packet/built-in.o net/sunrpc/built-in.o net/sysctl_net.o
make -j3 -f scripts/Makefile.build obj=lib
gcc -Wp,-MD,lib/.brlock.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=brlock -DKBUILD_MODNAME=brlock -c -o lib/brlock.o lib/brlock.c
gcc -Wp,-MD,lib/.cmdline.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=cmdline -DKBUILD_MODNAME=cmdline -c -o lib/cmdline.o lib/cmdline.c
gcc -Wp,-MD,lib/.bust_spinlocks.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=bust_spinlocks -DKBUILD_MODNAME=bust_spinlocks -c -o lib/bust_spinlocks.o lib/bust_spinlocks.c
gcc -Wp,-MD,lib/.rbtree.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=rbtree -DKBUILD_MODNAME=rbtree -c -o lib/rbtree.o lib/rbtree.c
gcc -Wp,-MD,lib/.radix-tree.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=radix_tree -DKBUILD_MODNAME=radix_tree -c -o lib/radix-tree.o lib/radix-tree.c
gcc -Wp,-MD,lib/.dump_stack.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=dump_stack -DKBUILD_MODNAME=dump_stack -c -o lib/dump_stack.o lib/dump_stack.c
gcc -Wp,-MD,lib/.kobject.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=kobject -DKBUILD_MODNAME=kobject -c -o lib/kobject.o lib/kobject.c
gcc -Wp,-MD,lib/.rwsem.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=rwsem -DKBUILD_MODNAME=rwsem -c -o lib/rwsem.o lib/rwsem.c
gcc -Wp,-MD,lib/.crc32.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=crc32 -DKBUILD_MODNAME=crc32 -c -o lib/crc32.o lib/crc32.c
make -j3 -f scripts/Makefile.build obj=lib/zlib_deflate
make[2]: warning: -jN forced in submake: disabling jobserver mode.
gcc -Wp,-MD,lib/zlib_deflate/.deflate.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=deflate -DKBUILD_MODNAME=zlib_deflate -c -o lib/zlib_deflate/deflate.o lib/zlib_deflate/deflate.c
gcc -Wp,-MD,lib/zlib_deflate/.deflate_syms.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=deflate_syms -DKBUILD_MODNAME=zlib_deflate -c -o lib/zlib_deflate/deflate_syms.o lib/zlib_deflate/deflate_syms.c
make -j3 -f scripts/Makefile.build obj=lib/zlib_inflate
make[2]: warning: -jN forced in submake: disabling jobserver mode.
gcc -Wp,-MD,lib/zlib_inflate/.inflate.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=inflate -DKBUILD_MODNAME=zlib_inflate -c -o lib/zlib_inflate/inflate.o lib/zlib_inflate/inflate.c
gcc -Wp,-MD,lib/zlib_inflate/.inflate_syms.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=inflate_syms -DKBUILD_MODNAME=zlib_inflate -c -o lib/zlib_inflate/inflate_syms.o lib/zlib_inflate/inflate_syms.c
ld -m elf_i386 -r -o lib/zlib_inflate/zlib_inflate.o lib/zlib_inflate/infblock.o lib/zlib_inflate/infcodes.o lib/zlib_inflate/inffast.o lib/zlib_inflate/inflate.o lib/zlib_inflate/inftrees.o lib/zlib_inflate/infutil.o lib/zlib_inflate/inflate_syms.o
ld -m elf_i386 -r -o lib/zlib_inflate/built-in.o lib/zlib_inflate/zlib_inflate.o
ld -m elf_i386 -r -o lib/zlib_deflate/zlib_deflate.o lib/zlib_deflate/deflate.o lib/zlib_deflate/deftree.o lib/zlib_deflate/deflate_syms.o
ld -m elf_i386 -r -o lib/zlib_deflate/built-in.o lib/zlib_deflate/zlib_deflate.o
rm -f lib/lib.a; ar rcs lib/lib.a lib/errno.o lib/ctype.o lib/string.o lib/vsprintf.o lib/brlock.o lib/cmdline.o lib/bust_spinlocks.o lib/rbtree.o lib/radix-tree.o lib/dump_stack.o lib/kobject.o lib/rwsem.o lib/crc32.o lib/zlib_inflate/built-in.o lib/zlib_deflate/built-in.o lib/crc32.o lib/crc32.o lib/crc32.o lib/crc32.o
make -j3 -f scripts/Makefile.build obj=arch/i386/lib
gcc -Wp,-MD,arch/i386/lib/.delay.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=delay -DKBUILD_MODNAME=delay -c -o arch/i386/lib/delay.o arch/i386/lib/delay.c
gcc -Wp,-MD,arch/i386/lib/.usercopy.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=usercopy -DKBUILD_MODNAME=usercopy -c -o arch/i386/lib/usercopy.o arch/i386/lib/usercopy.c
rm -f arch/i386/lib/lib.a; ar rcs arch/i386/lib/lib.a arch/i386/lib/checksum.o arch/i386/lib/delay.o arch/i386/lib/usercopy.o arch/i386/lib/getuser.o arch/i386/lib/memcpy.o arch/i386/lib/strstr.o arch/i386/lib/dec_and_lock.o
Generating build number
Generating include/linux/compile.h (updated)
gcc -Wp,-MD,init/.version.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -fomit-frame-pointer -nostdinc -iwithprefix include -DKBUILD_BASENAME=version -DKBUILD_MODNAME=version -c -o init/version.o init/version.c
ld -m elf_i386 -r -o init/built-in.o init/main.o init/version.o init/do_mounts.o init/initramfs.o
ld -m elf_i386 -e stext -T arch/i386/vmlinux.lds.s arch/i386/kernel/head.o arch/i386/kernel/init_task.o init/built-in.o --start-group usr/built-in.o arch/i386/kernel/built-in.o arch/i386/mm/built-in.o arch/i386/mach-generic/built-in.o kernel/built-in.o mm/built-in.o fs/built-in.o ipc/built-in.o security/built-in.o crypto/built-in.o drivers/built-in.o sound/built-in.o arch/i386/pci/built-in.o net/built-in.o lib/lib.a arch/i386/lib/lib.a --end-group -o .tmp_vmlinux1
drivers/built-in.o(.data+0x31e14): undefined reference to `local symbols in discarded section .exit.text'
make: *** [.tmp_vmlinux1] Error 1
real 14m38.140s
user 26m14.280s
sys 2m11.310s
++ break
++ sleep 1
[-- Attachment #3: config --]
[-- Type: TEXT/PLAIN, Size: 28080 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MGEODE is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_SMP=y
CONFIG_PREEMPT=y
# CONFIG_VOYAGER is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_NR_CPUS=4
# CONFIG_X86_NUMA is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
CONFIG_I82365=y
CONFIG_TCIC=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_CONCAT is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
# CONFIG_NFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_SCx200_DOCFLASH is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_HPT34X=y
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NFORCE is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1542=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_XFRM_USER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_UNCLEAN=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_MIRROR=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRA=y
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_MULTIPORT=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PROC=y
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
# CONFIG_CIFS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_ZISOFS_FS=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
CONFIG_SOUND_FUSION=y
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_STORAGE is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_KALLSYMS=y
# CONFIG_X86_STACK_CHECK is not set
CONFIG_IOMMU_DEBUG=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY_CAPABILITIES=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TEST=y
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG]2.5.49-ac1 - more info on make error
2002-11-27 20:45 [BUG]2.5.49-ac1 - more info on make error Bill Davidsen
@ 2002-12-02 17:06 ` Randy.Dunlap
2002-12-02 19:02 ` Bill Davidsen
2002-12-02 18:22 ` Adrian Bunk
1 sibling, 1 reply; 8+ messages in thread
From: Randy.Dunlap @ 2002-12-02 17:06 UTC (permalink / raw)
To: Bill Davidsen; +Cc: Linux-Kernel
On Wed, 27 Nov 2002, Bill Davidsen wrote:
| Knowing that modules are still broken, I changed all modules to be
| built-in and dropped all support for modules and retried the compile. I
| have disabled all but the features I really want to test on the new
| kernel, so I will not be reducing the features any more.
I haven't seen any replies or fixes for this. Have you?
drivers/built-in.o(.data+0x31e14): undefined reference to `local symbols
in discarded section .exit.text'
Please visit http://www.kernelnewbies.org/scripts/ and download
the 'reference-discarded.pl' script, run it, and let us know where the
problem is.
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG]2.5.49-ac1 - more info on make error
2002-12-02 17:06 ` Randy.Dunlap
@ 2002-12-02 19:02 ` Bill Davidsen
2002-12-02 19:05 ` Randy.Dunlap
0 siblings, 1 reply; 8+ messages in thread
From: Bill Davidsen @ 2002-12-02 19:02 UTC (permalink / raw)
To: Randy.Dunlap; +Cc: Linux-Kernel
On Mon, 2 Dec 2002, Randy.Dunlap wrote:
> On Wed, 27 Nov 2002, Bill Davidsen wrote:
>
> | Knowing that modules are still broken, I changed all modules to be
> | built-in and dropped all support for modules and retried the compile. I
> | have disabled all but the features I really want to test on the new
> | kernel, so I will not be reducing the features any more.
>
> I haven't seen any replies or fixes for this. Have you?
No. I have pretty much assumed that there is no interest in having this
work. The modules are broken to the point where either the author or
someone who has documentation on how they should work will have to fix
them. Clearly the policy of "if you want your change in the kernel you
have to fix what it breaks" is dead.
> drivers/built-in.o(.data+0x31e14): undefined reference to `local symbols
> in discarded section .exit.text'
>
> Please visit http://www.kernelnewbies.org/scripts/ and download
> the 'reference-discarded.pl' script, run it, and let us know where the
> problem is.
I posted that to the list, if it didn't make it for any reason I can't
easily recreate it, the machine has been converted to BSD, the 2.5 work is
on a removable drive which is removed, since we can't make any progress
with it for the moment.
It was the old tulip driver which had the problem, de21{something}x.c as I
recall. Without a doc on what causes that I gave up trying to fix it by
comparing to other modules.
Thanks for asking.
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [BUG]2.5.49-ac1 - more info on make error
2002-12-02 19:02 ` Bill Davidsen
@ 2002-12-02 19:05 ` Randy.Dunlap
2002-12-02 19:52 ` Bill Davidsen
0 siblings, 1 reply; 8+ messages in thread
From: Randy.Dunlap @ 2002-12-02 19:05 UTC (permalink / raw)
To: Bill Davidsen; +Cc: Linux-Kernel
On Mon, 2 Dec 2002, Bill Davidsen wrote:
| On Mon, 2 Dec 2002, Randy.Dunlap wrote:
|
| > On Wed, 27 Nov 2002, Bill Davidsen wrote:
| >
| > | Knowing that modules are still broken, I changed all modules to be
| > | built-in and dropped all support for modules and retried the compile. I
| > | have disabled all but the features I really want to test on the new
| > | kernel, so I will not be reducing the features any more.
| >
| > I haven't seen any replies or fixes for this. Have you?
|
| No. I have pretty much assumed that there is no interest in having this
| work. The modules are broken to the point where either the author or
| someone who has documentation on how they should work will have to fix
| them. Clearly the policy of "if you want your change in the kernel you
| have to fix what it breaks" is dead.
This is not the borked-modules problem; it's different.
| > drivers/built-in.o(.data+0x31e14): undefined reference to `local symbols
| > in discarded section .exit.text'
| >
| > Please visit http://www.kernelnewbies.org/scripts/ and download
| > the 'reference-discarded.pl' script, run it, and let us know where the
| > problem is.
|
| I posted that to the list, if it didn't make it for any reason I can't
| easily recreate it, the machine has been converted to BSD, the 2.5 work is
| on a removable drive which is removed, since we can't make any progress
| with it for the moment.
whatever. Adrian Bunk & Jeff Garzik have now posted patches for it.
| It was the old tulip driver which had the problem, de21{something}x.c as I
| recall. Without a doc on what causes that I gave up trying to fix it by
| comparing to other modules.
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [BUG]2.5.49-ac1 - more info on make error
2002-12-02 19:05 ` Randy.Dunlap
@ 2002-12-02 19:52 ` Bill Davidsen
0 siblings, 0 replies; 8+ messages in thread
From: Bill Davidsen @ 2002-12-02 19:52 UTC (permalink / raw)
To: Randy.Dunlap; +Cc: Linux-Kernel
On Mon, 2 Dec 2002, Randy.Dunlap wrote:
> On Mon, 2 Dec 2002, Bill Davidsen wrote:
> | No. I have pretty much assumed that there is no interest in having this
> | work. The modules are broken to the point where either the author or
> | someone who has documentation on how they should work will have to fix
> | them. Clearly the policy of "if you want your change in the kernel you
> | have to fix what it breaks" is dead.
>
> This is not the borked-modules problem; it's different.
I misread, I thought it came about when changes for module interface were
applied.
> | I posted that to the list, if it didn't make it for any reason I can't
> | easily recreate it, the machine has been converted to BSD, the 2.5 work is
> | on a removable drive which is removed, since we can't make any progress
> | with it for the moment.
>
> whatever. Adrian Bunk & Jeff Garzik have now posted patches for it.
Yes, I've noted my thanks earlier, particularly for some info on the
underlying cause, which will be useful when I see that problem again.
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG]2.5.49-ac1 - more info on make error
2002-11-27 20:45 [BUG]2.5.49-ac1 - more info on make error Bill Davidsen
2002-12-02 17:06 ` Randy.Dunlap
@ 2002-12-02 18:22 ` Adrian Bunk
2002-12-02 18:32 ` [PATCH] " Jeff Garzik
2002-12-02 19:44 ` Bill Davidsen
1 sibling, 2 replies; 8+ messages in thread
From: Adrian Bunk @ 2002-12-02 18:22 UTC (permalink / raw)
To: Bill Davidsen, Jeff Garzik; +Cc: Linux-Kernel, Randy.Dunlap
On Wed, Nov 27, 2002 at 03:45:24PM -0500, Bill Davidsen wrote:
>...
Content-Description: config
>...
> CONFIG_HOTPLUG=y
>...
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=y
>...
./drivers/net/tulip/de2104x.o(.data+0x74): undefined reference to `local
symbols in discarded section .exit.text'
In drivers/net/tulip/de2104x.c the function de_remove_on is __exit but
the pointer to it is __devexit_p.
Two possible solutions:
1. Make this driver hot-pluggable. Jeff Garzik vetoes against this
solution.
2. Change the __devexit_p to an #ifdef MODULE (it's ugly, but it lets
the driver compiles with all combinations of config options without
making it hot-pluggable):
--- drivers/net/tulip/de2104x.c.old 2002-12-02 19:16:24.000000000 +0100
+++ drivers/net/tulip/de2104x.c 2002-12-02 19:18:18.000000000 +0100
@@ -2217,8 +2217,9 @@
.name = DRV_NAME,
.id_table = de_pci_tbl,
.probe = de_init_one,
-#warning only here to fix build. should be __exit_p not __devexit_p.
- .remove = __devexit_p(de_remove_one),
+#ifdef MODULE
+ .remove = de_remove_one,
+#endif
#ifdef CONFIG_PM
.suspend = de_suspend,
.resume = de_resume,
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH] Re: [BUG]2.5.49-ac1 - more info on make error
2002-12-02 18:22 ` Adrian Bunk
@ 2002-12-02 18:32 ` Jeff Garzik
2002-12-02 19:44 ` Bill Davidsen
1 sibling, 0 replies; 8+ messages in thread
From: Jeff Garzik @ 2002-12-02 18:32 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Bill Davidsen, Linux-Kernel, Randy.Dunlap
[-- Attachment #1: Type: text/plain, Size: 844 bytes --]
Adrian Bunk wrote:
> On Wed, Nov 27, 2002 at 03:45:24PM -0500, Bill Davidsen wrote:
> ./drivers/net/tulip/de2104x.o(.data+0x74): undefined reference to `local
> symbols in discarded section .exit.text'
>
>
> In drivers/net/tulip/de2104x.c the function de_remove_on is __exit but
> the pointer to it is __devexit_p.
>
> Two possible solutions:
>
> 1. Make this driver hot-pluggable. Jeff Garzik vetoes against this
> solution.
>
> 2. Change the __devexit_p to an #ifdef MODULE (it's ugly, but it lets
> the driver compiles with all combinations of config options without
> making it hot-pluggable):
As noted in the #warning, solution 3 (__exit_p) is the preferred one ;-)
Bill Irwin wrote up the patch to fix things The Right Way(tm). The
attached patch from Bill should eliminate all compile errors and warnings.
Jeff
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 2172 bytes --]
This patch fixes tulip up by doing the following things:
(1) add __exit_p() to <linux/init.h>
(2) add the unused attributed to __exit routines for non-modules
(3) use __exit_p() to refer to de_remove_one()
(4) remove redundant timer initialization preceding variable initialization
drivers/net/tulip/de2104x.c | 4 +---
include/linux/init.h | 13 ++++++++++++-
2 files changed, 13 insertions(+), 4 deletions(-)
--- linux-2.5.49-mm1/include/linux/init.h Fri Nov 22 13:40:14 2002
+++ linux-2.5.49-mm2/include/linux/init.h Wed Nov 27 15:32:17 2002
@@ -42,10 +42,15 @@
discard it in modules) */
#define __init __attribute__ ((__section__ (".init.text")))
#define __initdata __attribute__ ((__section__ (".init.data")))
-#define __exit __attribute__ ((__section__(".exit.text")))
#define __exitdata __attribute__ ((__section__(".exit.data")))
#define __exit_call __attribute__ ((unused,__section__ (".exitcall.exit")))
+#ifdef MODULE
+#define __exit __attribute__ ((__section__(".exit.text")))
+#else
+#define __exit __attribute__ ((unused,__section__(".exit.text")))
+#endif
+
/* For assembly routines */
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
@@ -199,6 +204,12 @@ extern struct kernel_param __setup_start
#define __devexit_p(x) x
#else
#define __devexit_p(x) NULL
+#endif
+
+#ifdef MODULE
+#define __exit_p(x) x
+#else
+#define __exit_p(x) NULL
#endif
#endif /* _LINUX_INIT_H */
--- linux-2.5.49-mm1/drivers/net/tulip/de2104x.c Fri Nov 22 13:40:56 2002
+++ linux-2.5.49-mm2/drivers/net/tulip/de2104x.c Wed Nov 27 14:31:11 2002
@@ -2014,7 +2014,6 @@ static int __init de_init_one (struct pc
dev->watchdog_timeo = TX_TIMEOUT;
dev->irq = pdev->irq;
- init_timer(&de->media_timer);
de = dev->priv;
de->de21040 = ent->driver_data == 0 ? 1 : 0;
@@ -2217,8 +2216,7 @@ static struct pci_driver de_driver = {
.name = DRV_NAME,
.id_table = de_pci_tbl,
.probe = de_init_one,
-#warning only here to fix build. should be __exit_p not __devexit_p.
- .remove = __devexit_p(de_remove_one),
+ .remove = __exit_p(de_remove_one),
#ifdef CONFIG_PM
.suspend = de_suspend,
.resume = de_resume,
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [BUG]2.5.49-ac1 - more info on make error
2002-12-02 18:22 ` Adrian Bunk
2002-12-02 18:32 ` [PATCH] " Jeff Garzik
@ 2002-12-02 19:44 ` Bill Davidsen
1 sibling, 0 replies; 8+ messages in thread
From: Bill Davidsen @ 2002-12-02 19:44 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Jeff Garzik, Linux-Kernel, Randy.Dunlap
On Mon, 2 Dec 2002, Adrian Bunk wrote:
> On Wed, Nov 27, 2002 at 03:45:24PM -0500, Bill Davidsen wrote:
>
> >...
> Content-Description: config
> >...
> > CONFIG_HOTPLUG=y
> >...
> > #
> > # Tulip family network device support
> > #
> > CONFIG_NET_TULIP=y
> > CONFIG_DE2104X=y
> >...
>
> ./drivers/net/tulip/de2104x.o(.data+0x74): undefined reference to `local
> symbols in discarded section .exit.text'
>
>
> In drivers/net/tulip/de2104x.c the function de_remove_on is __exit but
> the pointer to it is __devexit_p.
>
> Two possible solutions:
Huh, not an hour after I said I hadn't heard anything I get two patches
and an explanation of what the base problem is, so I can apply it to any
other similar problems. I assumed that no one else was using this old
stuff.
Note: I have an old tulip card with a BNC and 10baseT connector on a
single card. I had assumed one or the other, but with 2.5 kernels the card
appears as two NICs, with separate io and irq addresses. Since I have to
support thinnet or replace a bunch of devices with network built in, and
cards which support BNC are getting scarce, this looks like a nice
semi-firewall solution.
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2002-12-02 19:51 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-27 20:45 [BUG]2.5.49-ac1 - more info on make error Bill Davidsen
2002-12-02 17:06 ` Randy.Dunlap
2002-12-02 19:02 ` Bill Davidsen
2002-12-02 19:05 ` Randy.Dunlap
2002-12-02 19:52 ` Bill Davidsen
2002-12-02 18:22 ` Adrian Bunk
2002-12-02 18:32 ` [PATCH] " Jeff Garzik
2002-12-02 19:44 ` Bill Davidsen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.