ADM1026

ADM1026

[Philip Edelbrock]

Hi Mary, thanks for the note.  We're currently in the process of 
developing a driver for the ADM1026.  We are also in the middle of some 
restructuring after our inclusion of Lm_sensors into Linus' kernel 
source tree.  I'll pass your offer of assistance to Philip Pokorny who 
is currently working on the ADM1026 driver.


Phil

Burke, Mary wrote:

>Hi Phil
>
>I am just enquiring about progress. I just got an email from someone
>looking for a Linux driver for the ADM1026. I wonder if you got this
>working and if so is it available on your website.
>BTW if there is anything we can do to help with this development please
>let me know. I will also keep you informed of upcoming products if you
>are interested. Let me know
>
>Thanks in advance
>Regards
>Mary
>
>
>-----Original Message-----
>From: phil@stimpy.netroedge.com [mailto:phil@stimpy.netroedge.com] 
>Sent: 05 February 2001 17:32
>To: Burke, Mary
>Cc: sensors@stimpy.netroedge.com
>Subject: Re: ADM1026
>
>
>On Mon, Feb 05, 2001 at 07:09:15AM -0500, Burke, Mary wrote:
>  
>
>>Hi Phil
>>
>>Analog Devices have a new hardware monitoring product (ADM1026) which 
>>you might be interested in supporting. The prelim version of this 
>>datasheet may be found at the following address: 
>>http://products.analog.com/products/info.asp?product­M1026
>>I can also send you an evaluation board if you are interested. If you 
>>have any questions or comments please don't hesitate to contact me. 
>>Thanks for your support on previous products.
>>    
>>
>
>Hi Mary,
>
>Thanks, yeah I'd like an eval board.  It doesn't look like we've played
>with a 1026 yet.  You can send it to me here:
>
>Philip Edelbrock
>Edge Design
>300 SW 2nd St
>Corvallis, OR 97333, USA
>
>Thanks!
>
>
>Phil
>
>  
>

ADM1026

[Philip Pokorny]

I'm got the driver mostly written and the support added to 
sensors/sensors.conf.  I've done some limited testing.  It would be 
great to have a demo board to test with.  I hope to have the driver 
posted today or Friday at the latest.

:v)

Philip Edelbrock wrote:
> 
> Hi Mary, thanks for the note.  We're currently in the process of 
> developing a driver for the ADM1026.  We are also in the middle of some 
> restructuring after our inclusion of Lm_sensors into Linus' kernel 
> source tree.  I'll pass your offer of assistance to Philip Pokorny who 
> is currently working on the ADM1026 driver.
> 
> 
> Phil
> 
> Burke, Mary wrote:
> 
>> Hi Phil
>>
>> I am just enquiring about progress. I just got an email from someone
>> looking for a Linux driver for the ADM1026. I wonder if you got this
>> working and if so is it available on your website.
>> BTW if there is anything we can do to help with this development please
>> let me know. I will also keep you informed of upcoming products if you
>> are interested. Let me know
>>
>> Thanks in advance
>> Regards
>> Mary
>>
>>
>> -----Original Message-----
>> From: phil@stimpy.netroedge.com [mailto:phil@stimpy.netroedge.com] 
>> Sent: 05 February 2001 17:32
>> To: Burke, Mary
>> Cc: sensors@stimpy.netroedge.com
>> Subject: Re: ADM1026
>>
>>
>> On Mon, Feb 05, 2001 at 07:09:15AM -0500, Burke, Mary wrote:
>>  
>>
>>> Hi Phil
>>>
>>> Analog Devices have a new hardware monitoring product (ADM1026) which 
>>> you might be interested in supporting. The prelim version of this 
>>> datasheet may be found at the following address: 
>>> http://products.analog.com/products/info.asp?product­M1026
>>> I can also send you an evaluation board if you are interested. If you 
>>> have any questions or comments please don't hesitate to contact me. 
>>> Thanks for your support on previous products.
>>>   
>>
>>
>> Hi Mary,
>>
>> Thanks, yeah I'd like an eval board.  It doesn't look like we've played
>> with a 1026 yet.  You can send it to me here:
>>
>> Philip Edelbrock
>> Edge Design
>> 300 SW 2nd St
>> Corvallis, OR 97333, USA
>>
>> Thanks!
>>
>>
>> Phil
>>
>>  
>>
> 



-- 
Philip Pokorny, Senior Engineer
Tel: 415-358-2635   Fax: 415-358-2646   Toll Free: 888-PENGUIN
PENGUIN COMPUTING, INC.
www.penguincomputing.com

[lm-sensors] ADM1026

[Stefano Baglioni]

Hi.

I have a pc with Linux Kernel 2.4.24 using lm_sensors for ADM1026 handling.

What is the procedure to read the Vbat input information on ADM1026 register?

Thanks

Stefano Baglioni

[lm-sensors] ADM1026

[Philip Pokorny]

The battery input is in10...

You may want to check out the sample config in doc/chips/adm1026

:v)

Stefano Baglioni wrote:

>Hi.
>
>I have a pc with Linux Kernel 2.4.24 using lm_sensors for ADM1026 handling.
>
>What is the procedure to read the Vbat input information on ADM1026 register?
>
>Thanks
>
>Stefano Baglioni
>
>_______________________________________________
>lm-sensors mailing list
>lm-sensors@lm-sensors.org
>http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>  
>