From: Andrew Bates <abates@omeganetserv.com>
To: A Gilmore <agilmore@shaw.ca>
Cc: linux-hams@vger.kernel.org
Subject: Re: transparent internet via radio
Date: Sun, 24 Aug 2003 18:14:40 -0600 [thread overview]
Message-ID: <3F4954F0.5050400@omeganetserv.com> (raw)
In-Reply-To: <1061769408.1126.98.camel@fluid.redwork.net>
Adrien,
You should investigate using wireless ethernet (802.11b). Several of
the 802.11b channels are in the Amateur spectrum. Also, the equipment
is widely available and quite afordable. By utilizing yagi or parabolic
antennas and good transcievers, you should be able to achieve a 15 mile
distance while maintaining at least 1mbps or better.
Of course, one of the drawbacks is that 802.11b requires nearly a
line-of-site path as 2ghz signals are easily reflected or absorbed by
obstructions.
Hope this helps!
Andrew/KB0LND
A Gilmore wrote:
>Having always had high-speed internet available, I have never looked
>into radio technology before. However, I have been asked recently if
>providing internet to a number of locations (varying between 10-50km
>away from central computer lab) is possible. Neither dial-up or
>broadband is accessible in these locations.
>
>So I started looking into radio. I will have one LAN with broadband
>internet, and remote LANs without any internet access. The idea is to
>put a TNC equipped linux gateway at each remote location, to tunnel
>TCP/IP over AX.25 to the central LAN with broadband, and route the
>TCP/IP from there.
>
>Is this feasible? Can speed be in the 28kbps or better range?
>Generally how much would the radio equipment cost? Is providing
>transparent internet by these means difficult, regarding routing and
>interfacing the protocols?
>
>Sorry if these questions are vague or overly simple, Id just like to
>know if this is possible before I spend the next several days
>researching it. Most of the information I have found so far, has been
>out-dated, and mostly focused on using TCP/IP to carry AX.25, rather
>then the vice-versa.
>Adrien
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-hams" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2003-08-25 0:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-24 23:56 transparent internet via radio A Gilmore
2003-08-25 0:14 ` Andrew Bates [this message]
2003-08-25 2:58 ` Bob Nielsen
2003-08-26 14:18 ` John Feist
2003-08-25 14:06 ` M Taylor
2003-08-25 14:41 ` Dennis Boone
2003-08-25 18:35 ` Jeroen Vreeken
2003-08-25 19:54 ` Jaime Robles
2003-08-25 20:31 ` Dennis Boone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F4954F0.5050400@omeganetserv.com \
--to=abates@omeganetserv.com \
--cc=agilmore@shaw.ca \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.