All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add MMCIF DT support
Date: Mon, 16 Feb 2015 22:59:02 +0000	[thread overview]
Message-ID: <4040756.88Rqm1nt32@wasted.cogentembedded.com> (raw)
In-Reply-To: <29687119.ELU9MoH02q@wasted.cogentembedded.com>

Define the generic R8A7794 part of the MMCIF0 device node.

Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -346,6 +346,17 @@
 		status = "disabled";
 	};
 
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;


WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add MMCIF DT support
Date: Tue, 17 Feb 2015 01:59:02 +0300	[thread overview]
Message-ID: <4040756.88Rqm1nt32@wasted.cogentembedded.com> (raw)
In-Reply-To: <29687119.ELU9MoH02q@wasted.cogentembedded.com>

Define the generic R8A7794 part of the MMCIF0 device node.

Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -346,6 +346,17 @@
 		status = "disabled";
 	};
 
+	mmcif0: mmc at ee200000 {
+		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-sh@vger.kernel.org, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add MMCIF DT support
Date: Tue, 17 Feb 2015 01:59:02 +0300	[thread overview]
Message-ID: <4040756.88Rqm1nt32@wasted.cogentembedded.com> (raw)
In-Reply-To: <29687119.ELU9MoH02q@wasted.cogentembedded.com>

Define the generic R8A7794 part of the MMCIF0 device node.

Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7794.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -346,6 +346,17 @@
 		status = "disabled";
 	};
 
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;


  reply	other threads:[~2015-02-16 22:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-16 22:57 [PATCH 0/2 resend] Add R8A7794/SILK board eMMC DT support Sergei Shtylyov
2015-02-16 22:57 ` Sergei Shtylyov
2015-02-16 22:57 ` Sergei Shtylyov
2015-02-16 22:59 ` Sergei Shtylyov [this message]
2015-02-16 22:59   ` [PATCH 1/2] ARM: shmobile: r8a7794: add MMCIF " Sergei Shtylyov
2015-02-16 22:59   ` Sergei Shtylyov
2015-02-19 16:10   ` Simon Horman
2015-02-19 16:10     ` Simon Horman
2015-02-19 16:10     ` Simon Horman
2015-02-19 17:02     ` Sergei Shtylyov
2015-02-19 17:02       ` Sergei Shtylyov
2015-02-19 17:02       ` Sergei Shtylyov
2015-02-19 17:55       ` Simon Horman
2015-02-19 17:55         ` Simon Horman
2015-02-19 17:55         ` Simon Horman
2015-02-19 19:13         ` Sergei Shtylyov
2015-02-19 19:13           ` Sergei Shtylyov
2015-02-19 19:13           ` Sergei Shtylyov
2015-02-16 23:00 ` [PATCH 2/2] ARM: shmobile: silk: add eMMC " Sergei Shtylyov
2015-02-16 23:00   ` Sergei Shtylyov
2015-02-16 23:00   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4040756.88Rqm1nt32@wasted.cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.