us-122 firwareloader

us-122 firwareloader

[JoDaY]

Hi all,

I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to 
load the right firmware... The usb led is not lightened :(

On the other linux, I can't get firmwareloader working...

Is someone know some tips in order to find the clue ? :)

Thanks

Jo



-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

Re: us-122 firwareloader

[Martin Langer]

On Mon, May 31, 2004 at 05:45:24PM +0200, JoDaY wrote:
> Hi all,
> 
> I've 2 install of linux, the first one is the oldest where hotplug
> is able to load firmware when I plug a Tascam us-122.
> But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to 
> load the right firmware... The usb led is not lightened :(

Sounds like you are using the old tascam-loader instead of usx2yloader. Have
you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?

> 
> On the other linux, I can't get firmwareloader working...

Where does it hang? Do you already have a renumbered ID? It changes from
8006 to 8007. Check that number with lsusb. Everything installed?
- fxload
- hotplug scripts
- alsa-tools/usx2yloader
- alsa-firmware/usx2yloader

Any output in the logfiles?


martin


-- 
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

Re: us-122 firwareloader

[JoDaY]

Martin Langer wrote:
> On Mon, May 31, 2004 at 05:45:24PM +0200, JoDaY wrote:
> 
>>Hi all,
>>
>>I've 2 install of linux, the first one is the oldest where hotplug
>>is able to load firmware when I plug a Tascam us-122.
>>But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to 
>>load the right firmware... The usb led is not lightened :(
> 
> 
> Sounds like you are using the old tascam-loader instead of usx2yloader. Have
> you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?
> 

You're right, the one which is able to load the firmware and make the 
LED of the card lighting is an old version.

I've tried to change it with alsa-tools and alsa-firmware:

- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi 
Interface" with lsusb

But the usb LED is always off :(


I can also see :
[USX2Y          ]: USB US-X2Y - TASCAM US-X2Y
                      TASCAM US-X2Y (1604:8007 if 0 at 002/008)
in /proc/asound/card

Is the LED off normal ? Am I near of the goal ? :)

Thanks you lot !

Jo



-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

Re: us-122 firwareloader

[Martin Langer]

On Mon, May 31, 2004 at 11:26:21PM +0200, JoDaY wrote:
> Martin Langer wrote:
> >On Mon, May 31, 2004 at 05:45:24PM +0200, JoDaY wrote:
> >
> >>Hi all,
> >>
> >>I've 2 install of linux, the first one is the oldest where hotplug
> >>is able to load firmware when I plug a Tascam us-122.
> >>But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to 
> >>load the right firmware... The usb led is not lightened :(
> >
> >
> >Sounds like you are using the old tascam-loader instead of usx2yloader. 
> >Have
> >you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?
> >
> 
> You're right, the one which is able to load the firmware and make the 
> LED of the card lighting is an old version.
> 
> I've tried to change it with alsa-tools and alsa-firmware:
> 
> - snd-usb-usx2y module is loading when I plug the us-122 card
> - I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi 
> Interface" with lsusb
> 
> But the usb LED is always off :(

 It's still the tascam loader! Check your hotplug configuration. The file
"tascam_fpga" you're using isn't the one by usx2yloader. You can remove the
old tascam-loader stuff there. The file "tascam_fpga" from tascam-loader was
different and it's no longer compatible with ALSA from today.

> Is the LED off normal ? 

It goes 'ON' after the second firmware upload. tascam_fpga in the hotplug
directory starts usx2yloader for this job.


martin

-- 
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click