f_ops flag to speed up compatible ioctls in linux kernel

f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Currently, on the x86_64 architecture, its quite tricky to make
a char device ioctl work for an x86 executables.
In particular,
   1. there is a requirement that ioctl number is unique -
      which is hard to guarantee especially for out of kernel modules
   2. there's a performance huge overhead for each compat call - there's
      a hash lookup in a global hash inside a lock_kernel -
      and I think compat performance *is* important.

Further, adding a command to the ioctl suddenly requires changing
two places - registration code and ioctl itself.
  
However, if all ioctl commands for a specific device
are not passing around pointers and long longs,
(relatively common case), and sometimes even
if they are, this ioctl is 64/32 bit compatible -
so why isnt there a simple way to declare this fact?

Here's a patch that simply adds a flag field to f_ops
that will cause all ioctls to get forwarded directly to the
64 bit call.

If all ioctls are compatible for a character device, a flag just
has to be set there, before the device is registered.

MST

diff -ruw linux-2.6.8.1/fs/compat.c linux-2.6.8.1-built/fs/compat.c
--- linux-2.6.8.1/fs/compat.c	2004-08-14 13:55:31.000000000 +0300
+++ linux-2.6.8.1-built/fs/compat.c	2004-09-01 09:52:10.126944256 +0300
@@ -392,7 +392,8 @@
 	if(!filp)
 		goto out2;
 
-	if (!filp->f_op || !filp->f_op->ioctl) {
+	if (!filp->f_op || !filp->f_op->ioctl ||
+          (filp->f_op->fops_flags & FOPS_IOCTL_COMPAT)) {
 		error = sys_ioctl (fd, cmd, arg);
 		goto out;
 	}
diff -ruw linux-2.6.8.1/include/linux/fs.h linux-2.6.8.1-built/include/linux/fs.h
--- linux-2.6.8.1/include/linux/fs.h	2004-08-14 13:55:09.000000000 +0300
+++ linux-2.6.8.1-built/include/linux/fs.h	2004-09-01 09:50:07.265622016 +0300
@@ -871,6 +871,7 @@
  */
 struct file_operations {
 	struct module *owner;
+	unsigned long fops_flags;		/* Flags, listed below. */
 	loff_t (*llseek) (struct file *, loff_t, int);
 	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
 	ssize_t (*aio_read) (struct kiocb *, char __user *, size_t, loff_t);
@@ -896,6 +897,8 @@
 	int (*dir_notify)(struct file *filp, unsigned long arg);
 };
 
+#define FOPS_IOCTL_COMPAT 0x00000001 /* ioctl is 32/64 bit compatible */
+
 struct inode_operations {
 	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
 	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);

Re: f_ops flag to speed up compatible ioctls in linux kernel

[viro]

On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> Hello!
> Currently, on the x86_64 architecture, its quite tricky to make
> a char device ioctl work for an x86 executables.
> In particular,
>    1. there is a requirement that ioctl number is unique -
>       which is hard to guarantee especially for out of kernel modules

Too bad.

>    2. there's a performance huge overhead for each compat call - there's
>       a hash lookup in a global hash inside a lock_kernel -
>       and I think compat performance *is* important.
> 
> Further, adding a command to the ioctl suddenly requires changing
> two places - registration code and ioctl itself.

So don't add them.  Adding a new ioctl is *NOT* a step to be taken lightly -
we used to be far too accepting in that area and as somebody who'd waded
through the resulting dungpiles over the last months I can tell you that
result is utterly revolting.

Excuse me, but I have zero sympathy to people who complain about obstacles
to dumping more into the same piles - it should be hard.

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Please do not mail me directly.

Quoting viro@parcelfarce.linux.theplanet.co.uk (viro@parcelfarce.linux.theplanet.co.uk) "Re: f_ops flag to speed up compatible ioctls in linux kernel":
> On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> >    2. there's a performance huge overhead for each compat call - there's
> >       a hash lookup in a global hash inside a lock_kernel -
> >       and I think compat performance *is* important.
> > 
> > Further, adding a command to the ioctl suddenly requires changing
> > two places - registration code and ioctl itself.
> 
> So don't add them.  Adding a new ioctl is *NOT* a step to be taken lightly -
> we used to be far too accepting in that area and as somebody who'd waded
> through the resulting dungpiles over the last months I can tell you that
> result is utterly revolting.

Why make it a bigger dungpile then?
And what about the performance overhead?

MST

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Lee Revell]

On Wed, 2004-09-01 at 03:32, viro@parcelfarce.linux.theplanet.co.uk
wrote:
> On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> > Hello!
> > Currently, on the x86_64 architecture, its quite tricky to make
> > a char device ioctl work for an x86 executables.
> > In particular,
> >    1. there is a requirement that ioctl number is unique -
> >       which is hard to guarantee especially for out of kernel modules
> 
> Too bad.
> 
> >    2. there's a performance huge overhead for each compat call - there's
> >       a hash lookup in a global hash inside a lock_kernel -
> >       and I think compat performance *is* important.
> > 
> > Further, adding a command to the ioctl suddenly requires changing
> > two places - registration code and ioctl itself.
> 
> So don't add them.  Adding a new ioctl is *NOT* a step to be taken lightly -
> we used to be far too accepting in that area and as somebody who'd waded
> through the resulting dungpiles over the last months I can tell you that
> result is utterly revolting.
> 

By adding a new ioctl you are adding a new use of the BKL.  It has been
suggested on dri-devel that this should be fixed.  Is this even
possible?

Lee

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Quoting Lee Revell (rlrevell@joe-job.com) "Re: f_ops flag to speed up compatible ioctls in linux kernel":
> By adding a new ioctl you are adding a new use of the BKL.  It has been
> suggested on dri-devel that this should be fixed.  Is this even
> possible?
> 
> Lee

I dont know - can the lock be released before the call to
filp->f_op->ioctl ?

I assume the reason its there is for legacy code - existing ioctls
may be assuming the BKL is taken, but maybe there could be another
flag in f_ops to let sys_ioctl release the lock before doing the call ...

Like this - would that be safe?


--- linux-2.6.8.1/fs/ioctl.c	2004-08-14 13:54:51.000000000 +0300
+++ linux-2.6.8.1-built/fs/ioctl.c	2004-09-01 11:14:59.944417160 +0300
@@ -126,6 +126,14 @@
 			error = -ENOTTY;
 			if (S_ISREG(filp->f_dentry->d_inode->i_mode))
 				error = file_ioctl(filp, cmd, arg);
+			else if (filp->f_op && filp->f_op->ioctl &&
+				(filp->f_op->fops_flags & FOPS_IOCTL_NOLOCK)) {
+			{
+				unlock_kernel();
+				error = filp->f_op->ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+				goto out;
+
+			}
 			else if (filp->f_op && filp->f_op->ioctl)
 				error = filp->f_op->ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
 	}

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Roland Dreier]

This thread raises the issue of the best way for a driver to handle
commands from userspace.  The typical situation is where the driver
needs to process commands from multiple processes and return a status
for each command.

I happen to work on the same type of drivers as Michael (InfiniBand),
and there are a fairly large number of operations that userspace would
like to call into the kernel for.  User applications ask the kernel
driver to do things like "create completion queue."  One would like to
make this call in a clean, simple, efficient way.

I can think of four ways to do this:

 - ioctl on char device:
     Nice because it is synchronous and allows for the kernel to
     return a status value easily.  Has a well-defined mechanism for
     handling 32-bit/64-bit compatibility.  Unfortunately ioctl
     methods run under the BKL.

 - read/write on char device:
     OK, except requires some mechanism (tag #) for matching requests
     and responses.  Nowhere clean to put 32/64 compatibility code.

 - netlink:
     Similar to read/write except it adds the possibility of dropping
     messages.

 - syscall:
     Syscalls are great in some ways.  They are the most direct way
     into the kernel, they allow 

     However: syscalls can't be added from modules; it's (quite
     correctly) very hard to get new syscalls added to the kernel;
     every arch numbers its syscalls differently.  Let's forget about
     syscalls.

ioctls end up looking like the least bad solution, although I'm open
to other opinions and I'd love to hear better ideas.  I'd be happy
with a policy of only accepting ioctls that are sparse and 32/64 clean
and generally maintainable-looking, but I don't think driver authors
have much alternative to ioctl right now.

Thanks,
  Roland

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Chris Wright]

* Roland Dreier (roland@topspin.com) wrote:
>  - read/write on char device:
>      OK, except requires some mechanism (tag #) for matching requests
>      and responses.  Nowhere clean to put 32/64 compatibility code.

You forgot a driver specific filesystem which exposes requests in a file
per request type style.  Also, there's a simple_transaction type of file
which can allow you send/recv data and should eliminate the need for
tagging.  Example, look at nfsd fs (fs/nfsd/nfsctl.c).

thanks,
-chris
-- 
Linux Security Modules     http://lsm.immunix.org     http://lsm.bkbits.net

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Roland Dreier]

    Chris> You forgot a driver specific filesystem which exposes
    Chris> requests in a file per request type style.  Also, there's a
    Chris> simple_transaction type of file which can allow you
    Chris> send/recv data and should eliminate the need for tagging.
    Chris> Example, look at nfsd fs (fs/nfsd/nfsctl.c).

Thanks, I'll take a look at this.  How does one handle the 32-bit
userspace / 64-bit kernel compat layer in this setup?

 - R.

Re: f_ops flag to speed up compatible ioctls in linux kernel

[viro]

On Wed, Sep 01, 2004 at 11:12:46AM -0700, Roland Dreier wrote:
>     Chris> You forgot a driver specific filesystem which exposes
>     Chris> requests in a file per request type style.  Also, there's a
>     Chris> simple_transaction type of file which can allow you
>     Chris> send/recv data and should eliminate the need for tagging.
>     Chris> Example, look at nfsd fs (fs/nfsd/nfsctl.c).
> 
> Thanks, I'll take a look at this.  How does one handle the 32-bit
> userspace / 64-bit kernel compat layer in this setup?

The sane approach is to have your structure platform-independent and have
no compat code at all.  Which is what we do with on-disk and over-the-wire
structures anyway.  And before Albert starts usual wanksession, no, ASCII
is not the only way to do that...

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Roland Dreier]

    Chris> You forgot a driver specific filesystem which exposes
    Chris> requests in a file per request type style.  Also, there's a
    Chris> simple_transaction type of file which can allow you
    Chris> send/recv data and should eliminate the need for tagging.
    Chris> Example, look at nfsd fs (fs/nfsd/nfsctl.c).

Thanks for the pointer -- I had a look at this stuff.  It seems that
using the simple_transaction stuff is fairly heavyweight -- if I
understand correctly, every operation requires userspace to do
open()-write()-read()-close(), and also uses a page of lowmem.  I'm
not sure if this is the best fit for our requirements with InfiniBand
drivers: although the user->kernel calls are not in the data path,
there can still be quite a few of them.

On the other hand, ioctl() holds the BKL through the whole operation
so that's suboptimal as well.

Thanks,
  Roland

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Roland Dreier]

    Chris> Trivial addition of allowing llseek to become transaction
    Chris> barrier increases this to ~300,000 transactions per second.
    Chris> Patch below gives you some basic idea.

Wow, great stuff.  Thanks a lot for taking the time to try this out.
Also thanks for the original suggestion -- the more I think about the
private filesystem idea the more I like it.

Do you think simple_transaction_llseek() should be merged upstream?
It would definitely make the simple_transaction stuff more useful for
my application.

Thanks,
  Roland

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Bill Davidsen]

viro@parcelfarce.linux.theplanet.co.uk wrote:
> On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> 
>>Hello!
>>Currently, on the x86_64 architecture, its quite tricky to make
>>a char device ioctl work for an x86 executables.
>>In particular,
>>   1. there is a requirement that ioctl number is unique -
>>      which is hard to guarantee especially for out of kernel modules
> 
> 
> Too bad.
> 
> 
>>   2. there's a performance huge overhead for each compat call - there's
>>      a hash lookup in a global hash inside a lock_kernel -
>>      and I think compat performance *is* important.
>>
>>Further, adding a command to the ioctl suddenly requires changing
>>two places - registration code and ioctl itself.
> 
> 
> So don't add them.  Adding a new ioctl is *NOT* a step to be taken lightly -
> we used to be far too accepting in that area and as somebody who'd waded
> through the resulting dungpiles over the last months I can tell you that
> result is utterly revolting.
> 
> Excuse me, but I have zero sympathy to people who complain about obstacles
> to dumping more into the same piles - it should be hard.

I don't think he was complaining so much as providing a rationale for 
the patch he offered which is intended to make things better. Seemed to 
me like a good context for the patch.

-- 
    -bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
  last possible moment - but no longer"  -me

Re: f_ops flag to speed up compatible ioctls in linux kernel

[Arjan van de Ven]

[-- Attachment #1: Type: text/plain, Size: 1029 bytes --]

On Wed, 2004-09-01 at 09:22, Michael S. Tsirkin wrote:
> Hello!
> Currently, on the x86_64 architecture, its quite tricky to make
> a char device ioctl work for an x86 executables.
> In particular,
>    1. there is a requirement that ioctl number is unique -
>       which is hard to guarantee especially for out of kernel modules

well... external modules thus should be really really careful with
ioctls then and not embrace and extend too much but just use existing
ones instead when reasonable

>    2. there's a performance huge overhead for each compat call - there's
>       a hash lookup in a global hash inside a lock_kernel -
>       and I think compat performance *is* important.

such is life

> 
> Further, adding a command to the ioctl suddenly requires changing
> two places - registration code and ioctl itself.

adding ioctls SHOULD be painful. Really painful. It's similar to adding
syscalls; you'll have to keep compatibility basically forever so adding
should not be an easy thing.


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Roland Dreier]

Currently the BKL is used to synchronize access to ioctl32_hash_table
in fs/compat.c.  It seems that an rwsem would be more appropriate,
since this would allow multiple lookups to occur in parallel (and also
serve the general good of minimizing use of the BKL).

I added lock_kernel()/unlock_kernel() around the call to t->handler
when a compatibility handler is found in compat_sys_ioctl() to
preserve the expectation that the BKL will be held during driver ioctl
operations.  It should be safe to do lock_kernel() while holding
ioctl32_sem because of the magic BKL sleep semantics.

I have booted this and run some basic 32-bit userspace on ppc64, and
also compile tested this for x86_64 and sparc64.

Thanks,
  Roland

Signed-off-by: Roland Dreier <roland@topspin.com>

Index: linux-bk/fs/compat.c
===================================================================
--- linux-bk.orig/fs/compat.c	2004-09-01 00:57:03.000000000 -0700
+++ linux-bk/fs/compat.c	2004-09-01 07:21:20.000000000 -0700
@@ -41,6 +41,7 @@
 #include <linux/nfsd/nfsd.h>
 #include <linux/nfsd/syscall.h>
 #include <linux/personality.h>
+#include <linux/rwsem.h>
 
 #include <net/sock.h>		/* siocdevprivate_ioctl */
 
@@ -247,7 +248,8 @@
 /* ioctl32 stuff, used by sparc64, parisc, s390x, ppc64, x86_64, MIPS */
 
 #define IOCTL_HASHSIZE 256
-struct ioctl_trans *ioctl32_hash_table[IOCTL_HASHSIZE];
+static struct ioctl_trans *ioctl32_hash_table[IOCTL_HASHSIZE];
+static DECLARE_RWSEM(ioctl32_sem);
 
 extern struct ioctl_trans ioctl_start[];
 extern int ioctl_table_size;
@@ -302,12 +304,12 @@
 	if (!new_t)
 		return -ENOMEM;
 
-	lock_kernel(); 
+	down_write(&ioctl32_sem);
 	for (t = ioctl32_hash_table[hash]; t; t = t->next) {
 		if (t->cmd == cmd) {
 			printk(KERN_ERR "Trying to register duplicated ioctl32 "
 					"handler %x\n", cmd);
-			unlock_kernel();
+			up_write(&ioctl32_sem);
 			kfree(new_t);
 			return -EINVAL; 
 		}
@@ -317,7 +319,7 @@
 	new_t->handler = handler;
 	ioctl32_insert_translation(new_t);
 
-	unlock_kernel();
+	up_write(&ioctl32_sem);
 	return 0;
 }
 EXPORT_SYMBOL(register_ioctl32_conversion);
@@ -337,11 +339,11 @@
 	unsigned long hash = ioctl32_hash(cmd);
 	struct ioctl_trans *t, *t1;
 
-	lock_kernel(); 
+	down_write(&ioctl32_sem);
 
 	t = ioctl32_hash_table[hash];
 	if (!t) { 
-		unlock_kernel();
+		up_write(&ioctl32_sem);
 		return -EINVAL;
 	} 
 
@@ -351,7 +353,7 @@
 			       __builtin_return_address(0), cmd);
 		} else { 
 			ioctl32_hash_table[hash] = t->next;
-			unlock_kernel();
+			up_write(&ioctl32_sem);
 			kfree(t);
 			return 0;
 		}
@@ -366,7 +368,7 @@
 				goto out;
 			} else { 
 				t->next = t1->next;
-				unlock_kernel();
+				up_write(&ioctl32_sem);
 				kfree(t1);
 				return 0;
 			}
@@ -376,7 +378,7 @@
 	printk(KERN_ERR "Trying to free unknown 32bit ioctl handler %x\n",
 				cmd);
 out:
-	unlock_kernel();
+	up_write(&ioctl32_sem);
 	return -EINVAL;
 }
 EXPORT_SYMBOL(unregister_ioctl32_conversion); 
@@ -397,7 +399,7 @@
 		goto out;
 	}
 
-	lock_kernel();
+	down_read(&ioctl32_sem);
 
 	t = ioctl32_hash_table[ioctl32_hash (cmd)];
 
@@ -405,14 +407,16 @@
 		t = t->next;
 	if (t) {
 		if (t->handler) { 
+			lock_kernel();
 			error = t->handler(fd, cmd, arg, filp);
 			unlock_kernel();
+			up_read(&ioctl32_sem);
 		} else {
-			unlock_kernel();
+			up_read(&ioctl32_sem);
 			error = sys_ioctl(fd, cmd, arg);
 		}
 	} else {
-		unlock_kernel();
+		up_read(&ioctl32_sem);
 		if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
 			error = siocdevprivate_ioctl(fd, cmd, arg);
 		} else {

Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Andrew Morton]

Roland Dreier <roland@topspin.com> wrote:
>
> Currently the BKL is used to synchronize access to ioctl32_hash_table
> in fs/compat.c.  It seems that an rwsem would be more appropriate,
> since this would allow multiple lookups to occur in parallel (and also
> serve the general good of minimizing use of the BKL).

It introduces additional bus-atomic operations into the fastpath, so we'll
be slower in the one-process-doing-lots-of ioctls case, and faster in the
lots-of-cpus-doing-ioctls case.

The change certainly makes sense from a clean-things-up and
prepare-for-bkl-removal point of view, however.

Some single-threaded and multi-threaded SMP microbenchmarking would be
nice, if you have time.

Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Andi Kleen]

On Wed, Sep 01, 2004 at 08:40:15AM -0700, Roland Dreier wrote:
> Currently the BKL is used to synchronize access to ioctl32_hash_table
> in fs/compat.c.  It seems that an rwsem would be more appropriate,
> since this would allow multiple lookups to occur in parallel (and also
> serve the general good of minimizing use of the BKL).
> 
> I added lock_kernel()/unlock_kernel() around the call to t->handler
> when a compatibility handler is found in compat_sys_ioctl() to
> preserve the expectation that the BKL will be held during driver ioctl
> operations.  It should be safe to do lock_kernel() while holding
> ioctl32_sem because of the magic BKL sleep semantics.
> 
> I have booted this and run some basic 32-bit userspace on ppc64, and
> also compile tested this for x86_64 and sparc64.

It does not make much sense because the ioctl will take the BKL 
anyways.

If you wanted to fix it properly better make it use RCU - 
but it cannot work for the case of calling a compat handler.

-Andi

Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Roland Dreier]

    Andi> It does not make much sense because the ioctl will take the
    Andi> BKL anyways.

True, but it seems pretty ugly to protect the ioctl32 hash with the
BKL.  I think the greater good of reducing use of the BKL should be
looked at.

    Andi> If you wanted to fix it properly better make it use RCU -
    Andi> but it cannot work for the case of calling a compat handler.

I'm not sure I follow what you're saying.  When I looked at this, at
first I thought RCU would be better for the hash lookup, but I didn't
see a way to prevent a compat handler from being removed while it was
running.  That's why I moved to a semaphore, which would hold off the
removal until the handler was done running.  Is this what you mean?
Do you see a way to use RCU here?

Thanks,
  Roland

Re: [discuss] Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Andi Kleen]

On Thu, Sep 02, 2004 at 03:26:49PM -0700, Roland Dreier wrote:
>     Andi> It does not make much sense because the ioctl will take the
>     Andi> BKL anyways.
> 
> True, but it seems pretty ugly to protect the ioctl32 hash with the
> BKL.  I think the greater good of reducing use of the BKL should be
> looked at.

Replacing one lock with two is IMHO a bad idea. Making the number
of locks smaller and avoiding the locking wall IMHO has priority
even over BKL removal. 

> 
>     Andi> If you wanted to fix it properly better make it use RCU -
>     Andi> but it cannot work for the case of calling a compat handler.
> 
> I'm not sure I follow what you're saying.  When I looked at this, at
> first I thought RCU would be better for the hash lookup, but I didn't
> see a way to prevent a compat handler from being removed while it was
> running.  That's why I moved to a semaphore, which would hold off the
> removal until the handler was done running.  Is this what you mean?
> Do you see a way to uose RCU here?

The code currently assumes that the compat code is either 
in the kernel or in the same module who implements the
device (then the high level module count handling for
the file descriptor takes care of it) 

The BKL couldn't protect again removal of sleeping compat 
handlers anyways because the BKL is dropped during a 
schedule, and they all can sleep in user accesses.
During this scheduling window the module could be unloaded
if its count was zero. But with the assumption above this
cannot happen.

So basically the locking there is not to protect against
running handlers, just to ensure consistency during
the list walking. The list isn't touched anymore
after the compat handler runs, so the sleeping in there
is no problem.

RCU could be used as well to protect the list because
there is no sleep involved.

-Andi

Re: [discuss] Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Roland Dreier]

    Andi> The BKL couldn't protect again removal of sleeping compat
    Andi> handlers anyways because the BKL is dropped during a
    Andi> schedule, and they all can sleep in user accesses.  During
    Andi> this scheduling window the module could be unloaded if its
    Andi> count was zero. But with the assumption above this cannot
    Andi> happen.

    Andi> So basically the locking there is not to protect against
    Andi> running handlers, just to ensure consistency during the list
    Andi> walking. The list isn't touched anymore after the compat
    Andi> handler runs, so the sleeping in there is no problem.

    Andi> RCU could be used as well to protect the list because there
    Andi> is no sleep involved.

OK, good point.  My logic was wrong when I considered RCU.  But now I
don't understand what you meant by "it cannot work" when you wrote
this in your previous email:

    Andi> If you wanted to fix it properly better make it use RCU -
    Andi> but it cannot work for the case of calling a compat handler.

Based on what you just wrote, it seems to me like RCU would actually
work fine.  Is this wrong?

Thanks,
  Roland

Re: [discuss] Re: [PATCH] fs/compat.c: rwsem instead of BKL around ioctl32_hash_table

[Andi Kleen]

>     Andi> If you wanted to fix it properly better make it use RCU -
>     Andi> but it cannot work for the case of calling a compat handler.
> 
> Based on what you just wrote, it seems to me like RCU would actually
> work fine.  Is this wrong?

I meant it wouldn't work if you wanted to fix the module count assumption 
I described above. Fixing it would be probably a good idea because it's a 
bit of a nasty trap and kind of undocumented. But a global lock for
it is not the right way to do it, if anything you would use the
module counts. 

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> Hello!
> Currently, on the x86_64 architecture, its quite tricky to make
> a char device ioctl work for an x86 executables.
> In particular,
>    1. there is a requirement that ioctl number is unique -
>       which is hard to guarantee especially for out of kernel modules

Yes, that is a problem for some people. But you should
have used an unique number in the first place.

There are some hackish ways to work around it for non modules[1], but at some
point we should probably support it better.

[1] it can be handled, except for module unloading, so you have
to disable that.

>    2. there's a performance huge overhead for each compat call - there's
>       a hash lookup in a global hash inside a lock_kernel -
>       and I think compat performance *is* important.

Did you actually measure it? I doubt it is a big issue.

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> > Hello!
> > Currently, on the x86_64 architecture, its quite tricky to make
> > a char device ioctl work for an x86 executables.
> > In particular,
> >    1. there is a requirement that ioctl number is unique -
> >       which is hard to guarantee especially for out of kernel modules
> 
> Yes, that is a problem for some people. But you should
> have used an unique number in the first place.

Do you mean the _IOC macro and friends?
But their uniqueness depends on allocating a unique magic number
in the first place.

> There are some hackish ways to work around it for non modules[1], but at some
> point we should probably support it better.
> 
> [1] it can be handled, except for module unloading, so you have
> to disable that.

Why use the global hash at all?
Why not, for example, pass a parameter to the ioctl function
to make it possible to figure out this is a compat call?

> >    2. there's a performance huge overhead for each compat call - there's
> >       a hash lookup in a global hash inside a lock_kernel -
> >       and I think compat performance *is* important.
> 
> Did you actually measure it? I doubt it is a big issue.
> 

But that would depend on what the driver actually does inside
the ioctl and on how many ioctls are already registered, would it not?

I built a silly driver example which just used a semaphore and a switch
statement inside the ioctl.

~/<1>tavor/tools/driver_new>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.357u 4.760s 0:05.11 100.0%    0+0k 0+0io 0pf+0w
~/<1>tavor/tools/driver_new>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.641u 6.486s 0:07.12 100.0%    0+0k 0+0io 0pf+0w

So just looking at system time there seems to be an overhead of
about 20%.
The overhead is bigger if there are collisions in the hash.

For muti-processor scenarious, the difference is much more pronounced
(note I have dual-cpu Opteron system):

~>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest32
/dev/mst/mt23108_pci_cr0 &
[2] 10829
[3] 10830
[2]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.435u 21.322s 0:21.76 99.9%    0+0k 0+0io 0pf+0w
[3]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.683u 21.231s 0:21.92 99.9%    0+0k 0+0io 0pf+0w
~>


~>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest64
/dev/mst/mt23108_pci_cr0 &
[2] 10831
[3] 10832
[3]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.474u 11.194s 0:11.70 99.6%    0+0k 0+0io 0pf+0w
[2]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.476u 11.277s 0:11.75 99.9%    0+0k 0+0io 0pf+0w
~>

So we get 50% slowdown.
I imagine this is the result of BKL contention during the hash lookup.

MST

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Tue, Sep 07, 2004 at 01:40:17PM +0300, Michael S. Tsirkin wrote:
> Hello!
> Quoting Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> > > Hello!
> > > Currently, on the x86_64 architecture, its quite tricky to make
> > > a char device ioctl work for an x86 executables.
> > > In particular,
> > >    1. there is a requirement that ioctl number is unique -
> > >       which is hard to guarantee especially for out of kernel modules
> > 
> > Yes, that is a problem for some people. But you should
> > have used an unique number in the first place.
> 
> Do you mean the _IOC macro and friends?
> But their uniqueness depends on allocating a unique magic number
> in the first place.

Yep. It's not bullet proof, but works pretty well in practice with
a little care.

> 
> > There are some hackish ways to work around it for non modules[1], but at some
> > point we should probably support it better.
> > 
> > [1] it can be handled, except for module unloading, so you have
> > to disable that.
> 
> Why use the global hash at all?
> Why not, for example, pass a parameter to the ioctl function
> to make it possible to figure out this is a compat call?

The main reason is that traditionally there was some resistance
to put compat code into the drivers itself because it "looked too
ugly". So it was just put into a few centralized files. Patching 
all the f_ops wouldn't have been practical for this. 

Maybe it could be added as an additional mechanism now though.

> > >    2. there's a performance huge overhead for each compat call - there's
> > >       a hash lookup in a global hash inside a lock_kernel -
> > >       and I think compat performance *is* important.
> > 
> > Did you actually measure it? I doubt it is a big issue.
> > 
> 
> But that would depend on what the driver actually does inside
> the ioctl and on how many ioctls are already registered, would it not?

Most ioctls should be registered at boot, the additional ones
are probably negligible.

> 
> I built a silly driver example which just used a semaphore and a switch
> statement inside the ioctl.
> 
> ~/<1>tavor/tools/driver_new>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> 0.357u 4.760s 0:05.11 100.0%    0+0k 0+0io 0pf+0w
> ~/<1>tavor/tools/driver_new>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> 0.641u 6.486s 0:07.12 100.0%    0+0k 0+0io 0pf+0w
> 
> So just looking at system time there seems to be an overhead of
> about 20%.

That's with an empty ioctl? I would expect most ioctls to do
more work, so the overhead would be less.

Still it could be probably made better. 

> The overhead is bigger if there are collisions in the hash.
> 
> For muti-processor scenarious, the difference is much more pronounced
> (note I have dual-cpu Opteron system):
> 
> ~>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest32
> /dev/mst/mt23108_pci_cr0 &
> [2] 10829
> [3] 10830
> [2]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> 0.435u 21.322s 0:21.76 99.9%    0+0k 0+0io 0pf+0w
> [3]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> 0.683u 21.231s 0:21.92 99.9%    0+0k 0+0io 0pf+0w
> ~>
> 
> 
> ~>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest64
> /dev/mst/mt23108_pci_cr0 &
> [2] 10831
> [3] 10832
> [3]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> 0.474u 11.194s 0:11.70 99.6%    0+0k 0+0io 0pf+0w
> [2]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> 0.476u 11.277s 0:11.75 99.9%    0+0k 0+0io 0pf+0w
> ~>
> 
> So we get 50% slowdown.
> I imagine this is the result of BKL contention during the hash lookup.


Ok, this could be improved agreed (although I still think your microbenchmark
is a bit too artificial) 

In theory the BKL could be dropped from the lookup anyways
if RCU is needed for the cleanup. For locking the handler 
itself into memory it doesn't make any difference.

What happens when you just remove the lock_kernel() there? 
(as long as you don't unload any modules this should be safe) 

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 01:40:17PM +0300, Michael S. Tsirkin wrote:
> > Hello!
> > Quoting Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > > On Wed, Sep 01, 2004 at 10:22:45AM +0300, Michael S. Tsirkin wrote:
> > > > Hello!
> > > > Currently, on the x86_64 architecture, its quite tricky to make
> > > > a char device ioctl work for an x86 executables.
> > > > In particular,
> > > >    1. there is a requirement that ioctl number is unique -
> > > >       which is hard to guarantee especially for out of kernel modules
> > > 
> > > Yes, that is a problem for some people. But you should
> > > have used an unique number in the first place.
> > 
> > Do you mean the _IOC macro and friends?
> > But their uniqueness depends on allocating a unique magic number
> > in the first place.
> 
> Yep. It's not bullet proof, but works pretty well in practice with
> a little care.

Hrmp. I for one *would* like something moer bulletproof.

> > 
> > > There are some hackish ways to work around it for non modules[1], but at some
> > > point we should probably support it better.
> > > 
> > > [1] it can be handled, except for module unloading, so you have
> > > to disable that.
> > 
> > Why use the global hash at all?
> > Why not, for example, pass a parameter to the ioctl function
> > to make it possible to figure out this is a compat call?
> 
> The main reason is that traditionally there was some resistance
> to put compat code into the drivers itself because it "looked too
> ugly". So it was just put into a few centralized files. Patching 
> all the f_ops wouldn't have been practical for this. 
> 
> Maybe it could be added as an additional mechanism now though.

I'll try to add it and see what this does not performance,
if this helps I'll send a patch.


> > > >    2. there's a performance huge overhead for each compat call - there's
> > > >       a hash lookup in a global hash inside a lock_kernel -
> > > >       and I think compat performance *is* important.
> > > 
> > > Did you actually measure it? I doubt it is a big issue.
> > > 
> > 
> > But that would depend on what the driver actually does inside
> > the ioctl and on how many ioctls are already registered, would it not?
> 
> Most ioctls should be registered at boot, the additional ones
> are probably negligible.

But this does not matter - the hash collision will add overhead
on each lookup - and whether you have collisions is a matter of luck -
theoretically, some users may use such drivers that you may always have
collisions.

> > 
> > I built a silly driver example which just used a semaphore and a switch
> > statement inside the ioctl.
> > 
> > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> > 0.357u 4.760s 0:05.11 100.0%    0+0k 0+0io 0pf+0w
> > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> > 0.641u 6.486s 0:07.12 100.0%    0+0k 0+0io 0pf+0w
> > 
> > So just looking at system time there seems to be an overhead of
> > about 20%.
> 
> That's with an empty ioctl?

Not exactly empty - below's the code snippet.




***

static int ioctl (struct inode *inode, struct file *file, unsigned int opcode, unsigned long udata_l)
{
  void* udata=(void*)udata_l;
  int minor=MINOR(inode->i_rdev);
  struct dev_data* dev=&devices[minor];
  int ret=0;

  /* By convention, any user gets read access
   * and is allowed to use the device.
   * Commands with no direction are administration
   * commands, and you need write permission
   * for this */

  if ( _IOC_DIR(opcode) == _IOC_NONE ) {
    if (! ( file->f_mode & FMODE_WRITE) ) return -EPERM;
  } else {
    if (! ( file->f_mode & FMODE_READ) ) return -EPERM;
  }

  if (down_interruptible(&devices[minor].sem)) {
    return -ERESTARTSYS;
  }


  switch (opcode) {

    /* .. snip .. */

    case PARAMS:
      {
        struct mst_pci_params_st paramsd;
        paramsd.bar=dev->bar;
        paramsd.size=dev->size;

        if (copy_to_user(udata, &paramsd, sizeof(paramsd))) {
          ret=-EFAULT;
        }
        goto fin;
      }

    default:
      ret= -ENOTTY;
      goto fin;
  }

  fin:
  up(&devices[minor].sem);
  return ret;
}

***



> I would expect most ioctls to do
> more work, so the overhead would be less.
> Still it could be probably made better. 

Then I expect you'll get bitten by the BKL taken while ioctl runs.
That's another issue that needs addressing, in my opinion.

> > The overhead is bigger if there are collisions in the hash.
> > 
> > For muti-processor scenarious, the difference is much more pronounced
> > (note I have dual-cpu Opteron system):
> > 
> > ~>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest32
> > /dev/mst/mt23108_pci_cr0 &
> > [2] 10829
> > [3] 10830
> > [2]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> > 0.435u 21.322s 0:21.76 99.9%    0+0k 0+0io 0pf+0w
> > [3]    Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> > 0.683u 21.231s 0:21.92 99.9%    0+0k 0+0io 0pf+0w
> > ~>
> > 
> > 
> > ~>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ;time /tmp/ioctltest64
> > /dev/mst/mt23108_pci_cr0 &
> > [2] 10831
> > [3] 10832
> > [3]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> > 0.474u 11.194s 0:11.70 99.6%    0+0k 0+0io 0pf+0w
> > [2]    Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> > 0.476u 11.277s 0:11.75 99.9%    0+0k 0+0io 0pf+0w
> > ~>
> > 
> > So we get 50% slowdown.
> > I imagine this is the result of BKL contention during the hash lookup.
> 
> 
> Ok, this could be improved agreed (although I still think your microbenchmark
> is a bit too artificial) 
>
> In theory the BKL could be dropped from the lookup anyways
> if RCU is needed for the cleanup. For locking the handler 
> itself into memory it doesn't make any difference.
> 
> What happens when you just remove the lock_kernel() there? 
> (as long as you don't unload any modules this should be safe) 
> 
> -Andi

Well, I personally do want to enable module unloading.
I think I'll add a new entry point to f_ops  and see what *this* does
to speed. That would be roughly equivalent, and cleaner, right?

MST

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Tue, Sep 07, 2004 at 04:45:18PM +0300, Michael S. Tsirkin wrote:
> > > I built a silly driver example which just used a semaphore and a switch
> > > statement inside the ioctl.
> > > 
> > > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> > > 0.357u 4.760s 0:05.11 100.0%    0+0k 0+0io 0pf+0w
> > > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> > > 0.641u 6.486s 0:07.12 100.0%    0+0k 0+0io 0pf+0w
> > > 
> > > So just looking at system time there seems to be an overhead of
> > > about 20%.
> > 
> > That's with an empty ioctl?
> 
> Not exactly empty - below's the code snippet.

Hmm, ok. Surprising then. Can you profile it to see where 
the bottleneck exactly is? 

> > I would expect most ioctls to do
> > more work, so the overhead would be less.
> > Still it could be probably made better. 
> 
> Then I expect you'll get bitten by the BKL taken while ioctl runs.

Yes, but that's a general problem, not specific to compat ioctls.

So far nobody dared to drop the BKL for ioctls because it would
require to audit/fix a *lot* of code.

The idea of taking the BKL during the hash lookup was that
when the BKL is taken anyways it doesn't make too much 
difference to take it a little bit longer. But this assumed
that the hash lookup is fast. If it isn't maybe the hash
function should just be optimized a bit or the table increased.

Most of the values are known at compile time, so maybe
some perfect hash generator like gperf could be used to
generate a better hash? 


> >
> > In theory the BKL could be dropped from the lookup anyways
> > if RCU is needed for the cleanup. For locking the handler 
> > itself into memory it doesn't make any difference.
> > 
> > What happens when you just remove the lock_kernel() there? 
> > (as long as you don't unload any modules this should be safe) 
> > 
> > -Andi
> 
> Well, I personally do want to enable module unloading.

It works fine as long as the compat function is in the same
module as the one providing the file_ops.

> I think I'll add a new entry point to f_ops  and see what *this* does
> to speed. That would be roughly equivalent, and cleaner, right?

It may help your module, but won't solve the general problem shorter
term.

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 04:45:18PM +0300, Michael S. Tsirkin wrote:
> > > > I built a silly driver example which just used a semaphore and a switch
> > > > statement inside the ioctl.
> > > > 
> > > > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
> > > > 0.357u 4.760s 0:05.11 100.0%    0+0k 0+0io 0pf+0w
> > > > ~/<1>tavor/tools/driver_new>time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
> > > > 0.641u 6.486s 0:07.12 100.0%    0+0k 0+0io 0pf+0w
> > > > 
> > > > So just looking at system time there seems to be an overhead of
> > > > about 20%.
> > > 
> > > That's with an empty ioctl?
> > 
> > Not exactly empty - below's the code snippet.
> 
> Hmm, ok. Surprising then. Can you profile it to see where 
> the bottleneck exactly is? 
> 
> 
>
> > > I would expect most ioctls to do
> > > more work, so the overhead would be less.
> > > Still it could be probably made better. 
> > 
> > Then I expect you'll get bitten by the BKL taken while ioctl runs.
> 
> Yes, but that's a general problem, not specific to compat ioctls.
> 
> So far nobody dared to drop the BKL for ioctls because it would
> require to audit/fix a *lot* of code.

But if we have a new entry point in f_ops, drivers will either
be audited as they are migrated to this, or will just take
the BKL themselves.

> The idea of taking the BKL during the hash lookup was that
> when the BKL is taken anyways it doesn't make too much 
> difference to take it a little bit longer. But this assumed
> that the hash lookup is fast. If it isn't maybe the hash
> function should just be optimized a bit or the table increased.
> 
> Most of the values are known at compile time, so maybe
> some perfect hash generator like gperf could be used to
> generate a better hash? 
> 
> 
> > >
> > > In theory the BKL could be dropped from the lookup anyways
> > > if RCU is needed for the cleanup. For locking the handler 
> > > itself into memory it doesn't make any difference.
> > > 
> > > What happens when you just remove the lock_kernel() there? 
> > > (as long as you don't unload any modules this should be safe) 
> > > 
> > > -Andi
> > 
> > Well, I personally do want to enable module unloading.
> 
> It works fine as long as the compat function is in the same
> module as the one providing the file_ops.
> 
> > I think I'll add a new entry point to f_ops  and see what *this* does
> > to speed. That would be roughly equivalent, and cleaner, right?
> 
> It may help your module, but won't solve the general problem shorter
> term.
> 
> -Andi

But longer term it will be better, so why not go there?
Once the infrastructure is there, drivers will be able to be
migrated as required.
MSt

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > It may help your module, but won't solve the general problem shorter
> > term.
> But longer term it will be better, so why not go there?
> Once the infrastructure is there, drivers will be able to be
> migrated as required.

I have no problems with that. You would need two new entry points:
one 64bit one without BKL and a 32bit one also without BKL. 

I think there were some objections to this scheme in the past,
but I cannot think of a good alternative. 

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > It may help your module, but won't solve the general problem shorter
> > > term.
> > But longer term it will be better, so why not go there?
> > Once the infrastructure is there, drivers will be able to be
> > migrated as required.
> 
> I have no problems with that. You would need two new entry points:
> one 64bit one without BKL and a 32bit one also without BKL. 
> 
> I think there were some objections to this scheme in the past,
> but I cannot think of a good alternative. 
> 

Maybe one entry point with a flag?
Compatible ioctls could just ignore the flag.

MST

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Tue, Sep 07, 2004 at 05:37:02PM +0300, Michael S. Tsirkin wrote:
> Hello!
> Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > > It may help your module, but won't solve the general problem shorter
> > > > term.
> > > But longer term it will be better, so why not go there?
> > > Once the infrastructure is there, drivers will be able to be
> > > migrated as required.
> > 
> > I have no problems with that. You would need two new entry points:
> > one 64bit one without BKL and a 32bit one also without BKL. 
> > 
> > I think there were some objections to this scheme in the past,
> > but I cannot think of a good alternative. 
> > 
> 
> Maybe one entry point with a flag?

That would be IMHO far uglier than two. 

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 05:37:02PM +0300, Michael S. Tsirkin wrote:
> > Hello!
> > Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > > On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > > > It may help your module, but won't solve the general problem shorter
> > > > > term.
> > > > But longer term it will be better, so why not go there?
> > > > Once the infrastructure is there, drivers will be able to be
> > > > migrated as required.
> > > 
> > > I have no problems with that. You would need two new entry points:
> > > one 64bit one without BKL and a 32bit one also without BKL. 
> > > 
> > > I think there were some objections to this scheme in the past,
> > > but I cannot think of a good alternative. 
> > > 
> > 
> > Maybe one entry point with a flag?
> 
> That would be IMHO far uglier than two. 
> 
> -Andi
>

What would be a good name? ioctl32/ioctl64? ioctl_compat/ioctl_native?

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Tue, Sep 07, 2004 at 05:45:43PM +0300, Michael S. Tsirkin wrote:
> > > > but I cannot think of a good alternative. 
> > > > 
> > > 
> > > Maybe one entry point with a flag?
> > 
> > That would be IMHO far uglier than two. 
> > 
> > -Andi
> >
> 
> What would be a good name? ioctl32/ioctl64? ioctl_compat/ioctl_native?

Later two sound ok to me.

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 05:45:43PM +0300, Michael S. Tsirkin wrote:
> > > > > but I cannot think of a good alternative. 
> > > > > 
> > > > 
> > > > Maybe one entry point with a flag?
> > > 
> > > That would be IMHO far uglier than two. 
> > > 
> > > -Andi
> > >
> > 
> > What would be a good name? ioctl32/ioctl64? ioctl_compat/ioctl_native?
> 
> Later two sound ok to me.
> 

Wait, I think that a properly coded ioctl can always
figure out this is a compat call by looking at the command
(see example below).
So maybe we can live with just one new entry point with these
semantics?

MST

Example:

my_ioctl.h

//This structure size is different on 32 and 64 bit systems
struct my_foo {
  long foobar;
};

#define FOO _IOR(MY_MAGIC,0,struct my_foo)

//
my_ioctl.c

struct my_foo32 {
  int foobar;
};
#define FOO32 _IOR(MY_MAGIC,0,struct my_foo32)

static int ioctl_native (struct inode *inode, struct file *file, unsigned int
    opcode, unsigned long udata_l);
static int ioctl_compat (struct inode *inode, struct file *file, unsigned int
    opcode, unsigned long udata_l);

static int ioctl (struct inode *inode, struct file *file, unsigned int
    opcode, unsigned long udata_l)
{
  switch (opcode)
  {
    case FOO32:
      return ioctl_compat(inode,file,opcode,udata_l);
    case FOO:
    default:
      return ioctl_native(inode,file,opcode,udata_l);
  }
}

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

> Wait, I think that a properly coded ioctl can always
> figure out this is a compat call by looking at the command
> (see example below).
> So maybe we can live with just one new entry point with these
> semantics?

I think two is cleaner. And needing 8 bytes more for a file_operations
structure is not exactly a catastrophe.

-Andi

[patch] Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > Wait, I think that a properly coded ioctl can always
> > figure out this is a compat call by looking at the command
> > (see example below).
> > So maybe we can live with just one new entry point with these
> > semantics?
> 
> I think two is cleaner. And needing 8 bytes more for a file_operations
> structure is not exactly a catastrophe.
> 
> -Andi

OK.
Here (below) is an attempt at a patch.
There are two new entrypoints in file operations (for native and compat ioctls)
both called without BKL being taken at any point.


Since with this approach I cant call sys_ioctl directly from compat_sys_ioctl,
I had to split the common code into a routine std_sys_ioctl.
This handles ioctls which are common for all files, 
(mostly without BKL, too - which made it possible to remove compat
macros for these commands ) - and returns status indicating whether ioctl was
handled.

I declared it in linux/ioctl.h, let me know if that's a good place for her.

Boots fine, now to update the driver and check how this works.
I'll follow up, test some more and benchmark this, hopefully tomorrow.

Pls let me know what do you think.

MST

diff -ruwp linux-2.6.8.1/include/linux/fs.h linux-2.6.8.1-new/include/linux/fs.h
--- linux-2.6.8.1/include/linux/fs.h	2004-09-07 19:33:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-08 07:18:20.000000000 +0300
@@ -879,6 +879,8 @@ struct file_operations {
 	int (*readdir) (struct file *, void *, filldir_t);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
+	int (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
+	int (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *);
diff -ruwp linux-2.6.8.1/include/linux/ioctl.h linux-2.6.8.1-new/include/linux/ioctl.h
--- linux-2.6.8.1/include/linux/ioctl.h	2004-08-14 13:54:50.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/ioctl.h	2004-09-08 07:40:19.000000000 +0300
@@ -3,5 +3,11 @@
 
 #include <asm/ioctl.h>
 
+/* Handles standard ioctl calls */
+struct file;
+int std_sys_ioctl(
+  unsigned int fd, unsigned int cmd, unsigned long arg,
+  struct file * filp, int* error);
+
 #endif /* _LINUX_IOCTL_H */
diff -ruwp linux-2.6.8.1/fs/ioctl.c linux-2.6.8.1-new/fs/ioctl.c
--- linux-2.6.8.1/fs/ioctl.c	2004-09-07 19:30:28.000000000 +0300
+++ linux-2.6.8.1-new/fs/ioctl.c	2004-09-08 07:38:03.000000000 +0300
@@ -35,7 +35,9 @@ static int file_ioctl(struct file *filp,
 			if ((error = get_user(block, p)) != 0)
 				return error;
 
+			lock_kernel();
 			res = mapping->a_ops->bmap(mapping, block);
+			unlock_kernel();
 			return put_user(res, p);
 		}
 		case FIGETBSZ:
@@ -45,29 +47,21 @@ static int file_ioctl(struct file *filp,
 		case FIONREAD:
 			return put_user(i_size_read(inode) - filp->f_pos, p);
 	}
-	if (filp->f_op && filp->f_op->ioctl)
-		return filp->f_op->ioctl(inode, filp, cmd, arg);
 	return -ENOTTY;
 }
 
 
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+EXPORT_SYMBOL(std_sys_ioctl);
+int std_sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
+  struct file * filp, long* status)
 {	
-	struct file * filp;
+	int on,error;
 	unsigned int flag;
-	int on, error = -EBADF;
-
-	filp = fget(fd);
-	if (!filp)
-		goto out;
-
 	error = security_file_ioctl(filp, cmd, arg);
 	if (error) {
-                fput(filp);
-                goto out;
+		*status=error;
+		return 0;
         }
-
-	lock_kernel();
 	switch (cmd) {
 		case FIOCLEX:
 			set_close_on_exec(fd, 1);
@@ -99,8 +93,11 @@ asmlinkage long sys_ioctl(unsigned int f
 
 			/* Did FASYNC state change ? */
 			if ((flag ^ filp->f_flags) & FASYNC) {
-				if (filp->f_op && filp->f_op->fasync)
+				if (filp->f_op && filp->f_op->fasync) {
+					lock_kernel();
 					error = filp->f_op->fasync(fd, filp, on);
+					unlock_kernel();
+				}
 				else error = -ENOTTY;
 			}
 			if (error != 0)
@@ -124,13 +121,44 @@ asmlinkage long sys_ioctl(unsigned int f
 			break;
 		default:
 			error = -ENOTTY;
-			if (S_ISREG(filp->f_dentry->d_inode->i_mode))
+			if (S_ISREG(filp->f_dentry->d_inode->i_mode)) {
 				error = file_ioctl(filp, cmd, arg);
-			else if (filp->f_op && filp->f_op->ioctl)
-				error = filp->f_op->ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
 	}
+			if (error == -ENOTTY) return 1;
+	}
+	*status=error;
+	return 0;
+}
+
+
+
+asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{	
+	struct file * filp;
+	int error = -EBADF;
+	int fput_needed;
+
+	filp = fget_light(fd,&fput_needed);
+	if (!filp)
+		goto out;
+
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error)) {
+		goto out;
+	}
+
+	if (filp->f_op && filp->f_op->ioctl_native)
+		error = filp->f_op->ioctl_native(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
+	else if (filp->f_op && filp->f_op->ioctl) {
+		lock_kernel();
+		error = filp->f_op->ioctl(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
 	unlock_kernel();
-	fput(filp);
+	}
+
+	fput_light(filp,fput_needed);
 
 out:
 	return error;
diff -ruwp linux-2.6.8.1/fs/compat.c linux-2.6.8.1-new/fs/compat.c
--- linux-2.6.8.1/fs/compat.c	2004-08-14 13:55:31.000000000 +0300
+++ linux-2.6.8.1-new/fs/compat.c	2004-09-08 07:33:51.000000000 +0300
@@ -387,13 +387,17 @@ asmlinkage long compat_sys_ioctl(unsigne
 	struct file * filp;
 	int error = -EBADF;
 	struct ioctl_trans *t;
+	int fput_needed;
 
-	filp = fget(fd);
+	filp = fget_light(fd, &fput_needed);
 	if(!filp)
 		goto out2;
 
-	if (!filp->f_op || !filp->f_op->ioctl) {
-		error = sys_ioctl (fd, cmd, arg);
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error))
+		goto out;
+	else if (filp->f_op && filp->f_op->ioctl_compat) {
+		error = filp->f_op->ioctl_compat( filp->f_dentry->d_inode,
+				filp, cmd, arg);
 		goto out;
 	}
 
@@ -406,11 +410,12 @@ asmlinkage long compat_sys_ioctl(unsigne
 	if (t) {
 		if (t->handler) { 
 			error = t->handler(fd, cmd, arg, filp);
-			unlock_kernel();
-		} else {
-			unlock_kernel();
-			error = sys_ioctl(fd, cmd, arg);
+		} else if (filp->f_op && filp->f_op->ioctl) {
+			error = filp->f_op->ioctl(
+					filp->f_dentry->d_inode,
+					filp, cmd, arg);
 		}
+		unlock_kernel();
 	} else {
 		unlock_kernel();
 		if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
@@ -446,7 +451,7 @@ asmlinkage long compat_sys_ioctl(unsigne
 		}
 	}
 out:
-	fput(filp);
+	fput_light(filp, fput_needed);
 out2:
 	return error;
 }
diff -ruwp linux-2.6.8.1/include/linux/compat_ioctl.h linux-2.6.8.1-new/include/linux/compat_ioctl.h
--- linux-2.6.8.1/include/linux/compat_ioctl.h	2004-08-14 13:56:23.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/compat_ioctl.h	2004-09-07 20:19:24.000000000 +0300
@@ -54,15 +54,6 @@ COMPATIBLE_IOCTL(FBIOPUT_VSCREENINFO)
 COMPATIBLE_IOCTL(FBIOPAN_DISPLAY)
 COMPATIBLE_IOCTL(FBIOGET_CON2FBMAP)
 COMPATIBLE_IOCTL(FBIOPUT_CON2FBMAP)
-/* Little f */
-COMPATIBLE_IOCTL(FIOCLEX)
-COMPATIBLE_IOCTL(FIONCLEX)
-COMPATIBLE_IOCTL(FIOASYNC)
-COMPATIBLE_IOCTL(FIONBIO)
-COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
-/* 0x00 */
-COMPATIBLE_IOCTL(FIBMAP)
-COMPATIBLE_IOCTL(FIGETBSZ)
 /* 0x03 -- HD/IDE ioctl's used by hdparm and friends.
  *         Some need translations, these do not.
  */
diff -ruwp linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c
--- linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c	2004-08-14 13:55:32.000000000 +0300
+++ linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c	2004-09-07 20:19:05.000000000 +0300
@@ -188,7 +188,6 @@ COMPATIBLE_IOCTL(RTC_RD_TIME)
 COMPATIBLE_IOCTL(RTC_SET_TIME)
 COMPATIBLE_IOCTL(RTC_WKALM_SET)
 COMPATIBLE_IOCTL(RTC_WKALM_RD)
-COMPATIBLE_IOCTL(FIOQSIZE)
 
 /* And these ioctls need translation */
 HANDLE_IOCTL(TIOCGDEV, tiocgdev)

Re: [patch] Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

On Wed, Sep 08, 2004 at 05:28:08PM +0300, Michael S. Tsirkin wrote:
> --- linux-2.6.8.1/include/linux/fs.h	2004-09-07 19:33:43.000000000 +0300
> +++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-08 07:18:20.000000000 +0300
> @@ -879,6 +879,8 @@ struct file_operations {
>  	int (*readdir) (struct file *, void *, filldir_t);
>  	unsigned int (*poll) (struct file *, struct poll_table_struct *);
>  	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
> +	int (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
> +	int (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);

Define these as long, not int.  No need to waste 32 perfectly good bits on 
64bit platforms.

The main thing missing is documentation. You need clear comments what
the locking rules are and what compat is good for.

And you should change the code style to follow Documentation/CodingStyle

Other than that it looks ok to me.

-Andi

Re: [patch] Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [patch]   Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Wed, Sep 08, 2004 at 05:28:08PM +0300, Michael S. Tsirkin wrote:
> > --- linux-2.6.8.1/include/linux/fs.h	2004-09-07 19:33:43.000000000 +0300
> > +++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-08 07:18:20.000000000 +0300
> > @@ -879,6 +879,8 @@ struct file_operations {
> >  	int (*readdir) (struct file *, void *, filldir_t);
> >  	unsigned int (*poll) (struct file *, struct poll_table_struct *);
> >  	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
> > +	int (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
> > +	int (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);
> 
> Define these as long, not int.  No need to waste 32 perfectly good bits on 
> 64bit platforms.

I was just following ioctl. 

And ioctl is the way it is because man IOCTL(2) defines ioctl as

  int ioctl(int d, int request, ...);

So I wander what goes on here- the syscall returns a long but
libc cuts the high 32 bit?

Now that I think about it,for compat if you start returning 0 in low
32 bits you are unlike to get the effect you wanted ...
The ioctl_native could be changed but that would make it impossible
for compatible ioctls to just use the same pointer in both.

So what do you think - should I make just the native ioctl a long,
or both, and document that the high 32 bit are cut in the compat call?

> The main thing missing is documentation. You need clear comments what
> the locking rules are and what compat is good for.

Would these be best fit in the header file itself, or in a new
Documentation/ file?

> And you should change the code style to follow Documentation/CodingStyle
I'll go over it again. Something specific that I missed?

> Other than that it looks ok to me.
> 
> -Andi

Re: [patch] Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Andi Kleen]

> So I wander what goes on here- the syscall returns a long but
> libc cuts the high 32 bit?

System calls are always long, otherwise the syscall exit code cannot
check properly for signal restarts. 

glibc seems to indeed truncate. 

> 
> Now that I think about it,for compat if you start returning 0 in low
> 32 bits you are unlike to get the effect you wanted ...
> The ioctl_native could be changed but that would make it impossible
> for compatible ioctls to just use the same pointer in both.
> 
> So what do you think - should I make just the native ioctl a long,
> or both, and document that the high 32 bit are cut in the compat call?

both + document. 

> 
> > The main thing missing is documentation. You need clear comments what
> > the locking rules are and what compat is good for.
> 
> Would these be best fit in the header file itself, or in a new
> Documentation/ file?

Header file should be enough.

> > And you should change the code style to follow Documentation/CodingStyle
> I'll go over it again. Something specific that I missed?

e.g. your use of white space.

-Andi

Re: [patch] Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [patch]   Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > So I wander what goes on here- the syscall returns a long but
> > libc cuts the high 32 bit?
> 
> System calls are always long, otherwise the syscall exit code cannot
> check properly for signal restarts. 
> 
> glibc seems to indeed truncate. 
> 
> > 
> > Now that I think about it,for compat if you start returning 0 in low
> > 32 bits you are unlike to get the effect you wanted ...
> > The ioctl_native could be changed but that would make it impossible
> > for compatible ioctls to just use the same pointer in both.
> > 
> > So what do you think - should I make just the native ioctl a long,
> > or both, and document that the high 32 bit are cut in the compat call?
> 
> both + document. 

Given that libc truncates the high 32 bit, that compat call can only use
low 32 bit,  I begin to really think its better to leave this as int
and avoid the whole issue.

Additional advantage is in keeping 
the exact same interface as ioctl is that its easier to change a driver
to use this interface - just assign the call in field, no other changes.

MST

[patch] Re: [discuss] speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [patch]   Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Wed, Sep 08, 2004 at 05:28:08PM +0300, Michael S. Tsirkin wrote:
> > --- linux-2.6.8.1/include/linux/fs.h	2004-09-07 19:33:43.000000000 +0300
> > +++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-08 07:18:20.000000000 +0300
> > @@ -879,6 +879,8 @@ struct file_operations {
> >  	int (*readdir) (struct file *, void *, filldir_t);
> >  	unsigned int (*poll) (struct file *, struct poll_table_struct *);
> >  	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
> > +	int (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
> > +	int (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);
> 
> Define these as long, not int.  No need to waste 32 perfectly good bits on 
> 64bit platforms.
> 
> The main thing missing is documentation. You need clear comments what
> the locking rules are and what compat is good for.
> 
> And you should change the code style to follow Documentation/CodingStyle
> 
> Other than that it looks ok to me.
> 
> -Andi

OK, here (below) is an updated version. I added a bit of documentation
and fixed two coding style issues that I found, if there are more issues
please let me know.

There are two new calls done without taking the BKL at any point -
for native and compat ioctls. A separate call for compat ioctl
makes it possible to avoid the (IMO ugly) hash lookup altogether.

I made the calls return long although this means a driver can not just
reuse hos old "ioctl" function - the return type has to be changed.
Otherwise ioctl_native/ioctl_compat are a drop-in replacement.


Toy benchmark:   ioctl does a switch and takes a semaphore (note
dual processor results may be more drastic of there is no semaphore to
serialise on).

single process test:

before:
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.592u 8.313s 0:08.91 99.8%     0+0k 0+0io 0pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.669u 5.684s 0:06.36 99.6%     0+0k 0+0io 0pf+0w

after:
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.749u 5.133s 0:05.91 99.3%     0+0k 0+0io 1pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.583u 5.424s 0:06.01 99.8%     0+0k 0+0io 0pf+0w

System time reduced by 20% for 32 bit test.

Dual process (on dual CPU):

before:

time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.777u 28.376s 0:29.15 99.9%    0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
1.113u 28.179s 0:29.32 99.8%    0+0k 0+0io 0pf+0w


time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.551u 12.367s 0:12.92 99.9%    0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.554u 12.447s 0:13.01 99.8%    0+0k 0+0io 0pf+0w

after:

time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.749u 5.133s 0:05.91 99.3%     0+0k 0+0io 1pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.583u 5.424s 0:06.01 99.8%     0+0k 0+0io 0pf+0w
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest32
/dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.626u 9.947s 0:10.60 99.6%     0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.660u 10.039s 0:10.70 99.9%    0+0k 0+0io 0pf+0w


time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.473u 9.857s 0:10.37 99.5%     0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.632u 9.813s 0:10.44 100.0%    0+0k 0+0io 0pf+0w

Almost 50% improvement for 32 bit code.

MST



diff -ru linux-2.6.8.1/include/linux/fs.h linux-2.6.8.1-new/include/linux/fs.h
--- linux-2.6.8.1/include/linux/fs.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-15 15:12:38.474626592 +0300
@@ -879,6 +879,22 @@
 	int (*readdir) (struct file *, void *, filldir_t);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
+	/* The following two calls are a replacement for the ioctl call above.
+	 * They take precedence over ioctl - if set, ioctl will not be used.
+	 * Unlike ioctl, BKL is not taken: drivers shall manage their own
+	 * locking. */
+
+	/* If ioctl_native is set, it is used instead 
+	 * of ioctl for native ioctl syscalls.
+	 * Note that standard glibc ioctl trims the return code to int,
+	 * so dont try to put 64 bit there, unless you know what you are doing.
+	 */
+	long (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
+	/* If ioctl_compat is set, it is used for compatibility ioctl
+	 * (i.e. a 32 bit binary running on a 64 bit OS).
+	 * Note that only the low 32 bit of the return code are passed to the
+	 * user-space application. */
+	long (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *);
diff -ru linux-2.6.8.1/Documentation/filesystems/Locking linux-2.6.8.1-new/Documentation/filesystems/Locking
--- linux-2.6.8.1/Documentation/filesystems/Locking	2004-09-14 21:20:57.000000000 +0300
+++ linux-2.6.8.1-new/Documentation/filesystems/Locking	2004-09-15 15:23:35.149796792 +0300
@@ -331,6 +331,10 @@
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	int (*ioctl) (struct inode *, struct file *, unsigned int,
 			unsigned long);
+	long (*ioctl_native) (struct inode *, struct file *, unsigned int,
+			unsigned long);
+	long (*ioctl_compat) (struct inode *, struct file *, unsigned int,
+			unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *);
@@ -364,6 +368,8 @@
 readdir: 		no
 poll:			no
 ioctl:			yes	(see below)
+ioctl_native:		no	(see below)
+ioctl_compat:		no	(see below)
 mmap:			no
 open:			maybe	(see below)
 flush:			no
@@ -409,6 +415,9 @@
 anything that resembles union-mount we won't have a struct file for all
 components. And there are other reasons why the current interface is a mess...
 
+->ioctl() on regular files is superceded by the ->ioctl_native() and
+->ioctl_compat() pair. The lock is not taken for these new calls.
+
 ->read on directories probably must go away - we should just enforce -EISDIR
 in sys_read() and friends.
 
diff -ru linux-2.6.8.1/fs/compat.c linux-2.6.8.1-new/fs/compat.c
--- linux-2.6.8.1/fs/compat.c	2004-09-14 21:20:56.000000000 +0300
+++ linux-2.6.8.1-new/fs/compat.c	2004-09-15 15:15:04.384444928 +0300
@@ -385,15 +385,19 @@
 				unsigned long arg)
 {
 	struct file * filp;
-	int error = -EBADF;
+	long error = -EBADF;
 	struct ioctl_trans *t;
+	int fput_needed;
 
-	filp = fget(fd);
+	filp = fget_light(fd, &fput_needed);
 	if(!filp)
 		goto out2;
 
-	if (!filp->f_op || !filp->f_op->ioctl) {
-		error = sys_ioctl (fd, cmd, arg);
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error))
+		goto out;
+	else if (filp->f_op && filp->f_op->ioctl_compat) {
+		error = filp->f_op->ioctl_compat( filp->f_dentry->d_inode,
+				filp, cmd, arg);
 		goto out;
 	}
 
@@ -406,11 +410,12 @@
 	if (t) {
 		if (t->handler) { 
 			error = t->handler(fd, cmd, arg, filp);
-			unlock_kernel();
-		} else {
-			unlock_kernel();
-			error = sys_ioctl(fd, cmd, arg);
+		} else if (filp->f_op && filp->f_op->ioctl) {
+			error = filp->f_op->ioctl(
+					filp->f_dentry->d_inode,
+					filp, cmd, arg);
 		}
+		unlock_kernel();
 	} else {
 		unlock_kernel();
 		if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
@@ -446,7 +451,7 @@
 		}
 	}
 out:
-	fput(filp);
+	fput_light(filp, fput_needed);
 out2:
 	return error;
 }
diff -ru linux-2.6.8.1/fs/ioctl.c linux-2.6.8.1-new/fs/ioctl.c
--- linux-2.6.8.1/fs/ioctl.c	2004-09-14 21:20:56.000000000 +0300
+++ linux-2.6.8.1-new/fs/ioctl.c	2004-09-15 15:13:16.065911848 +0300
@@ -35,7 +35,9 @@
 			if ((error = get_user(block, p)) != 0)
 				return error;
 
+			lock_kernel();
 			res = mapping->a_ops->bmap(mapping, block);
+			unlock_kernel();
 			return put_user(res, p);
 		}
 		case FIGETBSZ:
@@ -45,29 +47,17 @@
 		case FIONREAD:
 			return put_user(i_size_read(inode) - filp->f_pos, p);
 	}
-	if (filp->f_op && filp->f_op->ioctl)
-		return filp->f_op->ioctl(inode, filp, cmd, arg);
 	return -ENOTTY;
 }
 
 
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{	
-	struct file * filp;
+EXPORT_SYMBOL(std_sys_ioctl);
+int std_sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
+	struct file * filp, int* error)
+{
+	int on;
 	unsigned int flag;
-	int on, error = -EBADF;
-
-	filp = fget(fd);
-	if (!filp)
-		goto out;
-
-	error = security_file_ioctl(filp, cmd, arg);
-	if (error) {
-                fput(filp);
-                goto out;
-        }
-
-	lock_kernel();
+	*error = security_file_ioctl(filp, cmd, arg);
 	switch (cmd) {
 		case FIOCLEX:
 			set_close_on_exec(fd, 1);
@@ -78,7 +68,7 @@
 			break;
 
 		case FIONBIO:
-			if ((error = get_user(on, (int __user *)arg)) != 0)
+			if ((*error = get_user(on, (int __user *)arg)) != 0)
 				break;
 			flag = O_NONBLOCK;
 #ifdef __sparc__
@@ -93,17 +83,20 @@
 			break;
 
 		case FIOASYNC:
-			if ((error = get_user(on, (int __user *)arg)) != 0)
+			if ((*error = get_user(on, (int __user *)arg)) != 0)
 				break;
 			flag = on ? FASYNC : 0;
 
 			/* Did FASYNC state change ? */
 			if ((flag ^ filp->f_flags) & FASYNC) {
-				if (filp->f_op && filp->f_op->fasync)
-					error = filp->f_op->fasync(fd, filp, on);
-				else error = -ENOTTY;
+				if (filp->f_op && filp->f_op->fasync) {
+					lock_kernel();
+					*error = filp->f_op->fasync(fd, filp, on);
+					unlock_kernel();
+				}
+				else *error = -ENOTTY;
 			}
-			if (error != 0)
+			if (*error != 0)
 				break;
 
 			if (on)
@@ -117,20 +110,50 @@
 			    S_ISREG(filp->f_dentry->d_inode->i_mode) ||
 			    S_ISLNK(filp->f_dentry->d_inode->i_mode)) {
 				loff_t res = inode_get_bytes(filp->f_dentry->d_inode);
-				error = copy_to_user((loff_t __user *)arg, &res, sizeof(res)) ? -EFAULT : 0;
+				*error = copy_to_user((loff_t __user *)arg, &res, sizeof(res)) ? -EFAULT : 0;
 			}
 			else
-				error = -ENOTTY;
+				*error = -ENOTTY;
 			break;
 		default:
-			error = -ENOTTY;
-			if (S_ISREG(filp->f_dentry->d_inode->i_mode))
-				error = file_ioctl(filp, cmd, arg);
-			else if (filp->f_op && filp->f_op->ioctl)
-				error = filp->f_op->ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+			*error = -ENOTTY;
+			if (S_ISREG(filp->f_dentry->d_inode->i_mode)) {
+				*error = file_ioctl(filp, cmd, arg);
+			}
+			if (*error == -ENOTTY) return 1;
 	}
-	unlock_kernel();
-	fput(filp);
+	return 0;
+}
+
+
+
+asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{	
+	struct file * filp;
+	long error = -EBADF;
+	int fput_needed;
+
+	filp = fget_light(fd,&fput_needed);
+	if (!filp)
+		goto out;
+
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error)) {
+		goto out;
+	}
+
+	if (filp->f_op && filp->f_op->ioctl_native)
+		error = filp->f_op->ioctl_native(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
+	else if (filp->f_op && filp->f_op->ioctl) {
+		lock_kernel();
+		error = filp->f_op->ioctl(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
+		unlock_kernel();
+	}
+
+	fput_light(filp,fput_needed);
 
 out:
 	return error;
diff -ru linux-2.6.8.1/include/linux/ioctl.h linux-2.6.8.1-new/include/linux/ioctl.h
--- linux-2.6.8.1/include/linux/ioctl.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/ioctl.h	2004-09-13 18:04:23.000000000 +0300
@@ -3,5 +3,10 @@
 
 #include <asm/ioctl.h>
 
+/* Handles standard ioctl calls */
+struct file;
+int std_sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
+	struct file * filp, int* error);
+
 #endif /* _LINUX_IOCTL_H */
 
diff -ru linux-2.6.8.1/include/linux/compat_ioctl.h linux-2.6.8.1-new/include/linux/compat_ioctl.h
--- linux-2.6.8.1/include/linux/compat_ioctl.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/compat_ioctl.h	2004-09-07 20:19:24.000000000 +0300
@@ -54,15 +54,6 @@
 COMPATIBLE_IOCTL(FBIOPAN_DISPLAY)
 COMPATIBLE_IOCTL(FBIOGET_CON2FBMAP)
 COMPATIBLE_IOCTL(FBIOPUT_CON2FBMAP)
-/* Little f */
-COMPATIBLE_IOCTL(FIOCLEX)
-COMPATIBLE_IOCTL(FIONCLEX)
-COMPATIBLE_IOCTL(FIOASYNC)
-COMPATIBLE_IOCTL(FIONBIO)
-COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
-/* 0x00 */
-COMPATIBLE_IOCTL(FIBMAP)
-COMPATIBLE_IOCTL(FIGETBSZ)
 /* 0x03 -- HD/IDE ioctl's used by hdparm and friends.
  *         Some need translations, these do not.
  */
diff -ru linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c
--- linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c	2004-09-14 21:20:50.000000000 +0300
+++ linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c	2004-09-07 20:19:05.000000000 +0300
@@ -188,7 +188,6 @@
 COMPATIBLE_IOCTL(RTC_SET_TIME)
 COMPATIBLE_IOCTL(RTC_WKALM_SET)
 COMPATIBLE_IOCTL(RTC_WKALM_RD)
-COMPATIBLE_IOCTL(FIOQSIZE)
 
 /* And these ioctls need translation */
 HANDLE_IOCTL(TIOCGDEV, tiocgdev)

Is FIOQSIZE compatible? ( was Re: f_ops flag to speed up compatible ioctls in linux kernel)

[Michael S. Tsirkin]

Hello!
Quoting r. Andi Kleen (ak@suse.de) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 05:45:43PM +0300, Michael S. Tsirkin wrote:
> > > > > but I cannot think of a good alternative. 
> > > > > 
> > > > 
> > > > Maybe one entry point with a flag?
> > > 
> > > That would be IMHO far uglier than two. 
> > > 
> > > -Andi
> > >
> > 
> > What would be a good name? ioctl32/ioctl64? ioctl_compat/ioctl_native?
> 
> Later two sound ok to me.
> 
> -Andi

Why is FIOQSIZE in arch/x86_64/ia32/ia32_ioctl.c and not in 
include/linux/compat_ioctl.h ?

It is as far as I can see returning simply loff_t which is 64 bit
on all architectures.

Thanks,
  MST

Re: Is FIOQSIZE compatible? ( was Re: f_ops flag to speed up compatible ioctls in linux kernel)

[Andi Kleen]

> Why is FIOQSIZE in arch/x86_64/ia32/ia32_ioctl.c and not in 
> include/linux/compat_ioctl.h ?

Probably historical reasons. The ioctls used to be not merged.
> 
> It is as far as I can see returning simply loff_t which is 64 bit
> on all architectures.

It could be moved into the generic layer, I agree.

-Andi

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Herbert Poetzl]

On Tue, Sep 07, 2004 at 04:29:46PM +0200, Andi Kleen wrote:
> On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > It may help your module, but won't solve the general problem shorter
> > > term.
> > But longer term it will be better, so why not go there?
> > Once the infrastructure is there, drivers will be able to be
> > migrated as required.
> 
> I have no problems with that. You would need two new entry points:
> one 64bit one without BKL and a 32bit one also without BKL. 
> 
> I think there were some objections to this scheme in the past,
> but I cannot think of a good alternative. 

uhm, apologies for dropping in, for what exactly
are two (new) separate entry points needed?

somehow lost context here ...

TIA,
Herbert

> -Andi
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Herbert Poetzl (herbert@13thfloor.at) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> On Tue, Sep 07, 2004 at 04:29:46PM +0200, Andi Kleen wrote:
> > On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > > It may help your module, but won't solve the general problem shorter
> > > > term.
> > > But longer term it will be better, so why not go there?
> > > Once the infrastructure is there, drivers will be able to be
> > > migrated as required.
> > 
> > I have no problems with that. You would need two new entry points:
> > one 64bit one without BKL and a 32bit one also without BKL. 
> > 
> > I think there were some objections to this scheme in the past,
> > but I cannot think of a good alternative. 
> 
> uhm, apologies for dropping in, for what exactly
> are two (new) separate entry points needed?
> 
> somehow lost context here ...
> 
> TIA,
> Herbert

There are two uses BKL in the ioctl call path:
1. BKL is kept across the whole ioctl call
2. BKL is used to protect the compat hash lookup

So ioctl_native is to let drivers declare they dont need the BKL
in they ioctl.

ioctl_compat is to let drivers declare 
they dont need the hash lookup so it can be replaced by direct call by pointer.
MST

Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel

[Herbert Poetzl]

On Tue, Sep 07, 2004 at 09:07:19PM +0300, Michael S. Tsirkin wrote:
> Hello!
> Quoting r. Herbert Poetzl (herbert@13thfloor.at) "Re: [discuss] f_ops flag to speed up compatible ioctls in linux kernel":
> > On Tue, Sep 07, 2004 at 04:29:46PM +0200, Andi Kleen wrote:
> > > On Tue, Sep 07, 2004 at 05:25:30PM +0300, Michael S. Tsirkin wrote:
> > > > > It may help your module, but won't solve the general problem shorter
> > > > > term.
> > > > But longer term it will be better, so why not go there?
> > > > Once the infrastructure is there, drivers will be able to be
> > > > migrated as required.
> > > 
> > > I have no problems with that. You would need two new entry points:
> > > one 64bit one without BKL and a 32bit one also without BKL. 
> > > 
> > > I think there were some objections to this scheme in the past,
> > > but I cannot think of a good alternative. 
> > 
> > uhm, apologies for dropping in, for what exactly
> > are two (new) separate entry points needed?
> > 
> > somehow lost context here ...
> > 
> > TIA,
> > Herbert
> 
> There are two uses BKL in the ioctl call path:
> 1. BKL is kept across the whole ioctl call
> 2. BKL is used to protect the compat hash lookup
> 
> So ioctl_native is to let drivers declare they dont need the BKL
> in they ioctl.
> 
> ioctl_compat is to let drivers declare 
> they dont need the hash lookup so it can be replaced by direct call by pointer.

okay, thanks, I guess I got it now, just wondered why
there should be different implementations for 32 and
64 bit, but a different semantic explains it ...

thanks,
Herbert

> MST
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

how to detect a 32 bit process on 64 bit kernel

[Michael S. Tsirkin]

Hello!
Is there a reliable way e.g. on x86-64 (or ia64, or any other
64-bit system), from the char device driver,
to find out that I am running an operation in the context of a 32-bit
task?

If no - would not it make a sence to add e.g. a flag in the
task struct, to make it possible?

Thanks,
MST

Re: how to detect a 32 bit process on 64 bit kernel

[Jan Engelhardt]

>Hello!
>Is there a reliable way e.g. on x86-64 (or ia64, or any other
>64-bit system), from the char device driver,
>to find out that I am running an operation in the context of a 32-bit
>task?

I doubt you can distinguish these two (with the exception of looking at the 
ELF header of a file), because

	mov eax, 12345;

is valid for classic IA-32 -and- amd64, just as "mov ax,12" works for
any >= 80286.

>If no - would not it make a sence to add e.g. a flag in the
>task struct, to make it possible?

I do not see a reason why I would want to know this kind of information ATM, 
so this is something you will probably have keep in your own tree.

Basically, it is possible, you probably have to patch fs/binfmt_elf.c
a little to store a flag whether an ELF32 or ELF64 is currently being 
executed, and store it preferably in current->some_var_name;

Then you will also need to poke in fs/proc/* to export this information to 
userspace, otherwise there is no meaning in patching the task struct.



Jan Engelhardt
-- 
ENOSPC

Re: how to detect a 32 bit process on 64 bit kernel

[Christoph Hellwig]

On Sun, Dec 12, 2004 at 11:51:10PM +0200, Michael S. Tsirkin wrote:
> Hello!
> Is there a reliable way e.g. on x86-64 (or ia64, or any other
> 64-bit system), from the char device driver,
> to find out that I am running an operation in the context of a 32-bit
> task?

There's no way that's both reliable and portable.

> If no - would not it make a sence to add e.g. a flag in the
> task struct, to make it possible?

The kernel code shouldn't know.  If your driver needs this information
something is seriously wrong with it. 

Re: how to detect a 32 bit process on 64 bit kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Christoph Hellwig (hch@infradead.org) "Re: how to detect a 32 bit process on 64 bit kernel":
> > If no - would not it make a sence to add e.g. a flag in the
> > task struct, to make it possible?
> 
> The kernel code shouldn't know.  If your driver needs this information
> something is seriously wrong with it. 

A character driver I am working on gets passed a structure
from user space by implementing a write file operation.
The structure includes a pointer and so the format varies
between a 32 and 64 bit processes.

mst

Re: how to detect a 32 bit process on 64 bit kernel

[Jan Engelhardt]

>> > If no - would not it make a sence to add e.g. a flag in the
>> > task struct, to make it possible?
>> 
>> The kernel code shouldn't know.  If your driver needs this information
>> something is seriously wrong with it. 
>
>A character driver I am working on gets passed a structure
>from user space by implementing a write file operation.
>The structure includes a pointer and so the format varies
>between a 32 and 64 bit processes.

Do it like Glibc does. Use uint32_t and uint64_t when transferring things 
to/from kernelspace.



Jan Engelhardt
-- 
ENOSPC

Re: how to detect a 32 bit process on 64 bit kernel

[Brian Gerst]

Michael S. Tsirkin wrote:

> Hello!
> Quoting r. Christoph Hellwig (hch@infradead.org) "Re: how to detect a 32 bit process on 64 bit kernel":
> 
>>>If no - would not it make a sence to add e.g. a flag in the
>>>task struct, to make it possible?
>>
>>The kernel code shouldn't know.  If your driver needs this information
>>something is seriously wrong with it. 
> 
> 
> A character driver I am working on gets passed a structure
> from user space by implementing a write file operation.
> The structure includes a pointer and so the format varies
> between a 32 and 64 bit processes.

The most portable way to do this is to have the first member of the 
structure be a 32-bit value containing the size of the structure.  This 
can then be used to identify what the structure format is.  This also 
has the advantage of future-proofing the interface (add a field?  no 
problem, the new size can be checked for).  Just be very careful that 
the size from userspace is not trusted (ie. only allow known sizes).

--
				Brian Gerst

Re: how to detect a 32 bit process on 64 bit kernel

[Michael S. Tsirkin]

Hello!
Quoting r. Brian Gerst (bgerst@didntduck.org) "Re: how to detect a 32 bit process on 64 bit kernel":
> Michael S. Tsirkin wrote:
> 
> >Hello!
> >Quoting r. Christoph Hellwig (hch@infradead.org) "Re: how to detect a 32 
> >bit process on 64 bit kernel":
> >
> >>>If no - would not it make a sence to add e.g. a flag in the
> >>>task struct, to make it possible?
> >>
> >>The kernel code shouldn't know.  If your driver needs this information
> >>something is seriously wrong with it. 
> >
> >
> >A character driver I am working on gets passed a structure
> >from user space by implementing a write file operation.
> >The structure includes a pointer and so the format varies
> >between a 32 and 64 bit processes.
> 
> The most portable way to do this is to have the first member of the 
> structure be a 32-bit value containing the size of the structure.  This 
> can then be used to identify what the structure format is.  This also 
> has the advantage of future-proofing the interface (add a field?  no 
> problem, the new size can be checked for).  Just be very careful that 
> the size from userspace is not trusted (ie. only allow known sizes).
> 
> --
> 				Brian Gerst

The size wont be sufficient here since its variable size
(ends with an array).

Sure, I could also just ask everyone to pass pointers in a
packed long long, but either way it will break the applications.

Why wouldnt it make sence for struct task to have a bit that tells
me its a compat system?

MST

Re: how to detect a 32 bit process on 64 bit kernel

[Willy Tarreau]

On Sun, Dec 12, 2004 at 11:51:10PM +0200, Michael S. Tsirkin wrote:
> Hello!
> Is there a reliable way e.g. on x86-64 (or ia64, or any other
> 64-bit system), from the char device driver,
> to find out that I am running an operation in the context of a 32-bit
> task?

aren't there informations in /proc/$$/maps or other things which will
change their format or contents in 32 or 64 bits addressing, which would
help you detect the mode you're currently running ?

Willy

Re: how to detect a 32 bit process on 64 bit kernel

[Bongani Hlope]

[-- Attachment #1: Type: text/plain, Size: 721 bytes --]

On Monday 13 December 2004 00:37, Willy Tarreau wrote:
> On Sun, Dec 12, 2004 at 11:51:10PM +0200, Michael S. Tsirkin wrote:
> > Hello!
> > Is there a reliable way e.g. on x86-64 (or ia64, or any other
> > 64-bit system), from the char device driver,
> > to find out that I am running an operation in the context of a 32-bit
> > task?
>
> aren't there informations in /proc/$$/maps or other things which will
> change their format or contents in 32 or 64 bits addressing, which would
> help you detect the mode you're currently running ?
>

ugly bash script

ps -A | file `awk '{print "file /proc/"$1"/exe"}'` | grep "symbolic link to" | 
sed s%\`%% | sed s%\'%% | awk '{print "file "$5}' | sh | grep 32

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: how to detect a 32 bit process on 64 bit kernel

[Andi Kleen]

On Sun, Dec 12, 2004 at 11:51:10PM +0200, Michael S. Tsirkin wrote:
> Hello!
> Is there a reliable way e.g. on x86-64 (or ia64, or any other
> 64-bit system), from the char device driver,
> to find out that I am running an operation in the context of a 32-bit
> task?
> 
> If no - would not it make a sence to add e.g. a flag in the
> task struct, to make it possible?

There are non portable ways, but they are strong discouraged because 
we aim to eventually support 32bit ABIs from 64bit processes too.
Don't do it.


-Andi

[patch] speed up ioctls in linux kernel

[Michael S. Tsirkin]

Here's a small update to the ioctl speedup patch (comment tweaks only).
Sorry for reposting the whole message, I do it in the hope
to present some context for the patch.
Feedback is welcome, I think most issues pointed out to me
earlier are resolved, if not let me know.

Summary:

I'm trying to add a fast ioctl path to drivers. Two issues
are addressed: the fact that current drivers need BKL
to be taken around the ioctl call, and the hash lookup for
the compat ioctl for 32 bit architectures.

There are two new calls done without taking the BKL at any point -
for native and compat ioctls. A separate call for compat ioctl
makes it possible to avoid the (IMO ugly) hash lookup altogether.
The assumption is drivers will gradually miggrate to this f_ops
and we'll be able to kill the old ioctl with the BKL completely at some point.

I made the calls return long although this means a driver can not just
reuse the old "ioctl" function - the return type has to be changed.
Otherwise ioctl_native/ioctl_compat are a drop-in replacement
for ioctl.


Toy benchmark:   ioctl does a switch and takes a semaphore (note
dual processor results may be more drastic of there is no semaphore to
serialise on).
I have run the benchmark on a dual cpu
x86 64 bit system. I see a significant speedup for compat ioctls
and a slight speedup for native ioctls.

single process test:

before:
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.592u 8.313s 0:08.91 99.8%     0+0k 0+0io 0pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.669u 5.684s 0:06.36 99.6%     0+0k 0+0io 0pf+0w

after:
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.749u 5.133s 0:05.91 99.3%     0+0k 0+0io 1pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.583u 5.424s 0:06.01 99.8%     0+0k 0+0io 0pf+0w

System time reduced by 20% for 32 bit test.

Dual process (on dual CPU):

before:

time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.777u 28.376s 0:29.15 99.9%    0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
1.113u 28.179s 0:29.32 99.8%    0+0k 0+0io 0pf+0w


time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.551u 12.367s 0:12.92 99.9%    0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.554u 12.447s 0:13.01 99.8%    0+0k 0+0io 0pf+0w

after:

time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.749u 5.133s 0:05.91 99.3%     0+0k 0+0io 1pf+0w
time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.583u 5.424s 0:06.01 99.8%     0+0k 0+0io 0pf+0w
time /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest32
/dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.626u 9.947s 0:10.60 99.6%     0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest32 /dev/mst/mt23108_pci_cr0
0.660u 10.039s 0:10.70 99.9%    0+0k 0+0io 0pf+0w


time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 & ; time /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0 &
wait
[2]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.473u 9.857s 0:10.37 99.5%     0+0k 0+0io 0pf+0w
[1]  + Done                          /tmp/ioctltest64 /dev/mst/mt23108_pci_cr0
0.632u 9.813s 0:10.44 100.0%    0+0k 0+0io 0pf+0w

Almost 50% improvement for 32 bit code.

MST



diff -ru linux-2.6.8.1/include/linux/fs.h linux-2.6.8.1-new/include/linux/fs.h
--- linux-2.6.8.1/include/linux/fs.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/fs.h	2004-09-15 15:12:38.474626592 +0300
@@ -879,6 +879,22 @@
 	int (*readdir) (struct file *, void *, filldir_t);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
+	/* The two calls ioctl_native and ioctl_compat described below can be
+	 * used as a replacement for the ioctl call above. They take
+	 * precedence over ioctl: thus if they are set, ioctl is not used.
+	 * Unlike ioctl, BKL is not taken: drivers manage their own locking. */
+
+	/* If ioctl_native is set, it is used instead 
+	 * of ioctl for native ioctl syscalls.
+	 * Note that the standard glibc ioctl trims the return code to type int,
+	 * so dont try to put a 64 bit value there.
+	 */
+	long (*ioctl_native) (struct inode *, struct file *, unsigned int, unsigned long);
+	/* If ioctl_compat is set, it is used for a 32 bit compatible ioctl
+	 * (i.e. a 32 bit binary running on a 64 bit OS).
+	 * Note that only the low 32 bit of the return code are passed to the
+	 * user-space application. */
+	long (*ioctl_compat) (struct inode *, struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *);
diff -ru linux-2.6.8.1/Documentation/filesystems/Locking linux-2.6.8.1-new/Documentation/filesystems/Locking
--- linux-2.6.8.1/Documentation/filesystems/Locking	2004-09-14 21:20:57.000000000 +0300
+++ linux-2.6.8.1-new/Documentation/filesystems/Locking	2004-09-15 15:23:35.149796792 +0300
@@ -331,6 +331,10 @@
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	int (*ioctl) (struct inode *, struct file *, unsigned int,
 			unsigned long);
+	long (*ioctl_native) (struct inode *, struct file *, unsigned int,
+			unsigned long);
+	long (*ioctl_compat) (struct inode *, struct file *, unsigned int,
+			unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *);
@@ -364,6 +368,8 @@
 readdir: 		no
 poll:			no
 ioctl:			yes	(see below)
+ioctl_native:		no	(see below)
+ioctl_compat:		no	(see below)
 mmap:			no
 open:			maybe	(see below)
 flush:			no
@@ -409,6 +415,9 @@
 anything that resembles union-mount we won't have a struct file for all
 components. And there are other reasons why the current interface is a mess...
 
+->ioctl() on regular files is superceded by the ->ioctl_native() and
+->ioctl_compat() pair. The lock is not taken for these new calls.
+
 ->read on directories probably must go away - we should just enforce -EISDIR
 in sys_read() and friends.
 
diff -ru linux-2.6.8.1/fs/compat.c linux-2.6.8.1-new/fs/compat.c
--- linux-2.6.8.1/fs/compat.c	2004-09-14 21:20:56.000000000 +0300
+++ linux-2.6.8.1-new/fs/compat.c	2004-09-15 15:15:04.384444928 +0300
@@ -385,15 +385,19 @@
 				unsigned long arg)
 {
 	struct file * filp;
-	int error = -EBADF;
+	long error = -EBADF;
 	struct ioctl_trans *t;
+	int fput_needed;
 
-	filp = fget(fd);
+	filp = fget_light(fd, &fput_needed);
 	if(!filp)
 		goto out2;
 
-	if (!filp->f_op || !filp->f_op->ioctl) {
-		error = sys_ioctl (fd, cmd, arg);
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error))
+		goto out;
+	else if (filp->f_op && filp->f_op->ioctl_compat) {
+		error = filp->f_op->ioctl_compat( filp->f_dentry->d_inode,
+				filp, cmd, arg);
 		goto out;
 	}
 
@@ -406,11 +410,12 @@
 	if (t) {
 		if (t->handler) { 
 			error = t->handler(fd, cmd, arg, filp);
-			unlock_kernel();
-		} else {
-			unlock_kernel();
-			error = sys_ioctl(fd, cmd, arg);
+		} else if (filp->f_op && filp->f_op->ioctl) {
+			error = filp->f_op->ioctl(
+					filp->f_dentry->d_inode,
+					filp, cmd, arg);
 		}
+		unlock_kernel();
 	} else {
 		unlock_kernel();
 		if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
@@ -446,7 +451,7 @@
 		}
 	}
 out:
-	fput(filp);
+	fput_light(filp, fput_needed);
 out2:
 	return error;
 }
diff -ru linux-2.6.8.1/fs/ioctl.c linux-2.6.8.1-new/fs/ioctl.c
--- linux-2.6.8.1/fs/ioctl.c	2004-09-14 21:20:56.000000000 +0300
+++ linux-2.6.8.1-new/fs/ioctl.c	2004-09-15 15:13:16.065911848 +0300
@@ -35,7 +35,9 @@
 			if ((error = get_user(block, p)) != 0)
 				return error;
 
+			lock_kernel();
 			res = mapping->a_ops->bmap(mapping, block);
+			unlock_kernel();
 			return put_user(res, p);
 		}
 		case FIGETBSZ:
@@ -45,29 +47,17 @@
 		case FIONREAD:
 			return put_user(i_size_read(inode) - filp->f_pos, p);
 	}
-	if (filp->f_op && filp->f_op->ioctl)
-		return filp->f_op->ioctl(inode, filp, cmd, arg);
 	return -ENOTTY;
 }
 
 
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{	
-	struct file * filp;
+EXPORT_SYMBOL(std_sys_ioctl);
+int std_sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
+	struct file * filp, int* error)
+{
+	int on;
 	unsigned int flag;
-	int on, error = -EBADF;
-
-	filp = fget(fd);
-	if (!filp)
-		goto out;
-
-	error = security_file_ioctl(filp, cmd, arg);
-	if (error) {
-                fput(filp);
-                goto out;
-        }
-
-	lock_kernel();
+	*error = security_file_ioctl(filp, cmd, arg);
 	switch (cmd) {
 		case FIOCLEX:
 			set_close_on_exec(fd, 1);
@@ -78,7 +68,7 @@
 			break;
 
 		case FIONBIO:
-			if ((error = get_user(on, (int __user *)arg)) != 0)
+			if ((*error = get_user(on, (int __user *)arg)) != 0)
 				break;
 			flag = O_NONBLOCK;
 #ifdef __sparc__
@@ -93,17 +83,20 @@
 			break;
 
 		case FIOASYNC:
-			if ((error = get_user(on, (int __user *)arg)) != 0)
+			if ((*error = get_user(on, (int __user *)arg)) != 0)
 				break;
 			flag = on ? FASYNC : 0;
 
 			/* Did FASYNC state change ? */
 			if ((flag ^ filp->f_flags) & FASYNC) {
-				if (filp->f_op && filp->f_op->fasync)
-					error = filp->f_op->fasync(fd, filp, on);
-				else error = -ENOTTY;
+				if (filp->f_op && filp->f_op->fasync) {
+					lock_kernel();
+					*error = filp->f_op->fasync(fd, filp, on);
+					unlock_kernel();
+				}
+				else *error = -ENOTTY;
 			}
-			if (error != 0)
+			if (*error != 0)
 				break;
 
 			if (on)
@@ -117,20 +110,50 @@
 			    S_ISREG(filp->f_dentry->d_inode->i_mode) ||
 			    S_ISLNK(filp->f_dentry->d_inode->i_mode)) {
 				loff_t res = inode_get_bytes(filp->f_dentry->d_inode);
-				error = copy_to_user((loff_t __user *)arg, &res, sizeof(res)) ? -EFAULT : 0;
+				*error = copy_to_user((loff_t __user *)arg, &res, sizeof(res)) ? -EFAULT : 0;
 			}
 			else
-				error = -ENOTTY;
+				*error = -ENOTTY;
 			break;
 		default:
-			error = -ENOTTY;
-			if (S_ISREG(filp->f_dentry->d_inode->i_mode))
-				error = file_ioctl(filp, cmd, arg);
-			else if (filp->f_op && filp->f_op->ioctl)
-				error = filp->f_op->ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+			*error = -ENOTTY;
+			if (S_ISREG(filp->f_dentry->d_inode->i_mode)) {
+				*error = file_ioctl(filp, cmd, arg);
+			}
+			if (*error == -ENOTTY) return 1;
 	}
-	unlock_kernel();
-	fput(filp);
+	return 0;
+}
+
+
+
+asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{	
+	struct file * filp;
+	long error = -EBADF;
+	int fput_needed;
+
+	filp = fget_light(fd,&fput_needed);
+	if (!filp)
+		goto out;
+
+	if (!std_sys_ioctl(fd,cmd,arg,filp,&error)) {
+		goto out;
+	}
+
+	if (filp->f_op && filp->f_op->ioctl_native)
+		error = filp->f_op->ioctl_native(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
+	else if (filp->f_op && filp->f_op->ioctl) {
+		lock_kernel();
+		error = filp->f_op->ioctl(
+				filp->f_dentry->d_inode,
+				filp, cmd, arg);
+		unlock_kernel();
+	}
+
+	fput_light(filp,fput_needed);
 
 out:
 	return error;
diff -ru linux-2.6.8.1/include/linux/ioctl.h linux-2.6.8.1-new/include/linux/ioctl.h
--- linux-2.6.8.1/include/linux/ioctl.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/ioctl.h	2004-09-13 18:04:23.000000000 +0300
@@ -3,5 +3,10 @@
 
 #include <asm/ioctl.h>
 
+/* Handles standard ioctl calls */
+struct file;
+int std_sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
+	struct file * filp, int* error);
+
 #endif /* _LINUX_IOCTL_H */
 
diff -ru linux-2.6.8.1/include/linux/compat_ioctl.h linux-2.6.8.1-new/include/linux/compat_ioctl.h
--- linux-2.6.8.1/include/linux/compat_ioctl.h	2004-09-14 21:20:43.000000000 +0300
+++ linux-2.6.8.1-new/include/linux/compat_ioctl.h	2004-09-07 20:19:24.000000000 +0300
@@ -54,15 +54,6 @@
 COMPATIBLE_IOCTL(FBIOPAN_DISPLAY)
 COMPATIBLE_IOCTL(FBIOGET_CON2FBMAP)
 COMPATIBLE_IOCTL(FBIOPUT_CON2FBMAP)
-/* Little f */
-COMPATIBLE_IOCTL(FIOCLEX)
-COMPATIBLE_IOCTL(FIONCLEX)
-COMPATIBLE_IOCTL(FIOASYNC)
-COMPATIBLE_IOCTL(FIONBIO)
-COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
-/* 0x00 */
-COMPATIBLE_IOCTL(FIBMAP)
-COMPATIBLE_IOCTL(FIGETBSZ)
 /* 0x03 -- HD/IDE ioctl's used by hdparm and friends.
  *         Some need translations, these do not.
  */
diff -ru linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c
--- linux-2.6.8.1/arch/x86_64/ia32/ia32_ioctl.c	2004-09-14 21:20:50.000000000 +0300
+++ linux-2.6.8.1-new/arch/x86_64/ia32/ia32_ioctl.c	2004-09-07 20:19:05.000000000 +0300
@@ -188,7 +188,6 @@
 COMPATIBLE_IOCTL(RTC_SET_TIME)
 COMPATIBLE_IOCTL(RTC_WKALM_SET)
 COMPATIBLE_IOCTL(RTC_WKALM_RD)
-COMPATIBLE_IOCTL(FIOQSIZE)
 
 /* And these ioctls need translation */
 HANDLE_IOCTL(TIOCGDEV, tiocgdev)


----- End forwarded message -----

Re: how to detect a 32 bit process on 64 bit kernel

[Bodo Eggert]

Michael S. Tsirkin wrote:
> Quoting r. Brian Gerst (bgerst@didntduck.org) "Re: how to detect a 32 bit

>> The most portable way to do this is to have the first member of the
>> structure be a 32-bit value containing the size of the structure.

Better: Use version numbers.

> The size wont be sufficient here since its variable size 
> (ends with an array).

Use the size without the array, check the array size seperately.
Or see above.

> Sure, I could also just ask everyone to pass pointers in a
> packed long long, but either way it will break the applications.

If the size of structs you use in APIs is system dependant, it's most
likely b0rken.

> Why wouldnt it make sence for struct task to have a bit that tells
> me its a compat system?

Not having it will prevent you from creating strange interfaces.-)