[Bluez-devel] Re: Re: hciattach problem

[Bluez-devel] Re: Re: hciattach problem

[Andreas Millinger]

Hello Marcel,

I will check that with the the different bluez-utils/lib versions. But the Card is using H4. I have tried BCSP, too, but there is a Timeout error.

Regards Andreas


>please check if the bluez-utils version really matters.
>
>So the bad patch is between 2.6.10-mh1 and 2.6.10-mh2 and the 3Com
>version 3 card is using BCSP, right?
>
>Regards
>
>Marcel
>
>
>
>



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] Re: Re: hciattach problem

[Marcel Holtmann]

Hi Andreas,

> I will check that with the the different bluez-utils/lib versions. But the Card is using H4. I have tried BCSP, too, but there is a Timeout error.

I can't remember a change between -mh1 and -mh2 that would affect the
H:4 part of the hci_uart driver. Are you sure that these are clean
vanilla kernels with only my patch applied?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] Re: Re: hciattach problem

[Andreas Millinger]

Hello Marcel,

>actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be
>sure that the latest testing kernel before the final 2.6.11 has no
>problems with it. So grab 2.6.11-rc3-bk3 and test it please.
>  
I now have tested with 2.6.11-rc3-bk3 and the freez is back.
The last message in /var/log/messages is:
Feb 10 19:38:59 tuxlaptop exiting on signal 15

The messages at shutdown are:

Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1
cardmgr[3595]: exiting: `./serial stop ttyS16 2>&1`
cardmgr[3595]: +/dev/ttyS16:

The system hangs at this point. Only a power off does help. It seams, 
that there have been changes in PCMCIA or serial, because the messages 
with 2.6.10-mh3 look different. When I dont attach the card with 
hciattach the system shuts down, but there's also a error.
The last message in the log is also "exiting on signal 15".

Best regards
Andreas


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] Re: Re: hciattach problem

[Marcel Holtmann]

Hi Andreas,

> >actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be
> >sure that the latest testing kernel before the final 2.6.11 has no
> >problems with it. So grab 2.6.11-rc3-bk3 and test it please.
> >  
> I now have tested with 2.6.11-rc3-bk3 and the freez is back.
> The last message in /var/log/messages is:
> Feb 10 19:38:59 tuxlaptop exiting on signal 15
> 
> The messages at shutdown are:
> 
> Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1
> cardmgr[3595]: exiting: `./serial stop ttyS16 2>&1`
> cardmgr[3595]: +/dev/ttyS16:
> 
> The system hangs at this point. Only a power off does help. It seams, 
> that there have been changes in PCMCIA or serial, because the messages 
> with 2.6.10-mh3 look different. When I dont attach the card with 
> hciattach the system shuts down, but there's also a error.
> The last message in the log is also "exiting on signal 15".

please try 2.6.11-rc3-bk7 and what does "modinfo bluetooth" say?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] What is TYPE?

[Nelson Murilo]

Hi ,

I wrote a little program for dump in ascii format the link_key database:
# lk2a 
804996c 00:10:60:AA:9B:5B 00:60:57:DF:1D:29 804997c Fri May 27 10:58:47 2005

the 4o. field is TYPE, what is this exaclly? 

Thanks in advance,

./nelson -murilo


-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.  
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel