[Bluez-devel] Re: Re: hciattach problem

[Bluez-devel] Re: Re: hciattach problem

[Andreas Millinger]

Hello Marcel,

I will check that with the the different bluez-utils/lib versions. But the Card is using H4. I have tried BCSP, too, but there is a Timeout error.

Regards Andreas


>please check if the bluez-utils version really matters.
>
>So the bad patch is between 2.6.10-mh1 and 2.6.10-mh2 and the 3Com
>version 3 card is using BCSP, right?
>
>Regards
>
>Marcel
>
>
>
>



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] Re: Re: hciattach problem

[Marcel Holtmann]

Hi Andreas,

> I will check that with the the different bluez-utils/lib versions. But the Card is using H4. I have tried BCSP, too, but there is a Timeout error.

I can't remember a change between -mh1 and -mh2 that would affect the
H:4 part of the hci_uart driver. Are you sure that these are clean
vanilla kernels with only my patch applied?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] Re: Re: hciattach problem

[Andreas Millinger]

Hello Marcel,

>actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be
>sure that the latest testing kernel before the final 2.6.11 has no
>problems with it. So grab 2.6.11-rc3-bk3 and test it please.
>  
I now have tested with 2.6.11-rc3-bk3 and the freez is back.
The last message in /var/log/messages is:
Feb 10 19:38:59 tuxlaptop exiting on signal 15

The messages at shutdown are:

Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1
cardmgr[3595]: exiting: `./serial stop ttyS16 2>&1`
cardmgr[3595]: +/dev/ttyS16:

The system hangs at this point. Only a power off does help. It seams, 
that there have been changes in PCMCIA or serial, because the messages 
with 2.6.10-mh3 look different. When I dont attach the card with 
hciattach the system shuts down, but there's also a error.
The last message in the log is also "exiting on signal 15".

Best regards
Andreas


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] Re: Re: hciattach problem

[Marcel Holtmann]

Hi Andreas,

> >actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be
> >sure that the latest testing kernel before the final 2.6.11 has no
> >problems with it. So grab 2.6.11-rc3-bk3 and test it please.
> >  
> I now have tested with 2.6.11-rc3-bk3 and the freez is back.
> The last message in /var/log/messages is:
> Feb 10 19:38:59 tuxlaptop exiting on signal 15
> 
> The messages at shutdown are:
> 
> Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1
> cardmgr[3595]: exiting: `./serial stop ttyS16 2>&1`
> cardmgr[3595]: +/dev/ttyS16:
> 
> The system hangs at this point. Only a power off does help. It seams, 
> that there have been changes in PCMCIA or serial, because the messages 
> with 2.6.10-mh3 look different. When I dont attach the card with 
> hciattach the system shuts down, but there's also a error.
> The last message in the log is also "exiting on signal 15".

please try 2.6.11-rc3-bk7 and what does "modinfo bluetooth" say?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel