All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stas Sergeev <stsp@aknet.ru>
To: Andrew Morton <akpm@osdl.org>
Cc: Borislav Petkov <petkov@uni-muenster.de>,
	jamagallon@able.es, linux-kernel@vger.kernel.org
Subject: Re: 2.6.12-rc2-mm3
Date: Tue, 12 Apr 2005 08:20:34 +0400	[thread overview]
Message-ID: <425B4C92.1070507@aknet.ru> (raw)
In-Reply-To: <20050411152243.22835d96.akpm@osdl.org>

Hello.

Andrew Morton wrote:
>> Program received signal SIGTRAP, Trace/breakpoint trap.
SIGTRAP - it looks like the "int $3"
triggered, not "mov    0x30(%esp),%eax",
which is just the next insn and so the
%eip points to it, but it might be
innocent. And besides, 0x30(%esp) is
EFLAGS, not OLDSS. So I think maybe my
patch is not guilty this time, it is
just the non-zero preempt count on the
return path caused by something else.

>> (gdb) p $eip
>> $1 = (void *) 0xc0102ee7
Could you please also do
"p $esp" or "info reg", so that we can
see the rest of the registers?

>> And as we see, we're at the "mov    0x30(%esp),%eax" which accesses above the 
>> bottom of the stack.
But that's strange. Another instance of
the 0x30(%esp) is there a few instructions
above this one, see it with "disas restore_all".
It is much more likely that the real offender
is the previous instruction. $eip points on
the instruction *after* the trap, which might
be innocent.

>> After applying nmi_stack_correct-fix.patch, rc2-mm3
I can't find this one in an -mm broken-outs.
Where is this patch?
Could you please also test this one:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0504.0/1287.html
 
> Interesting.  It could be an interaction between the kgdb patch and the new
> vm86 checking code.
I think so too, will have a look if I can
reproduce it.

> The above code is accessing esp+56,
Yes, but this particular instruction was
not reached. "int $3" killed the system
for some reasons.

> -	p->thread.esp0 = (unsigned long) (childregs+1) - 8;
> +	p->thread.esp0 = (unsigned long) (childregs+1) - 15;
15 is somewhat nasty - it will make the
stack unaligned, should better be 16 I
think. But I don't see why, the only
scenario we've seen were the not stored
SS/ESP, which is 8 bytes only.
If we definitely think my patch is guilty
again, then probably something like this
is necessary:

--- linux/include/asm-i386/processor.h.old      2005-03-20 14:13:02.000000000 +0300
+++ linux/include/asm-i386/processor.h  2005-04-12 07:50:11.000000000 +0400
@@ -458,7 +458,7 @@
  * be within the limit.
  */
 #define INIT_TSS  {                                                    \
-       .esp0           = sizeof(init_stack) + (long)&init_stack,       \
+       .esp0           = sizeof(init_stack) - 8 + (long)&init_stack,   \
        .ss0            = __KERNEL_DS,                                  \
        .ss1            = __KERNEL_CS,                                  \
        .ldt            = GDT_ENTRY_LDT,                                \

But I don't think the init_stack can be
abused on the sysenter path, so this is
just a wild guess.


  reply	other threads:[~2005-04-12  5:30 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-11  8:25 2.6.12-rc2-mm3 Andrew Morton
2005-04-11  8:56 ` 2.6.12-rc2-mm3 J.A. Magallon
2005-04-11  9:43   ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-11 21:59     ` 2.6.12-rc2-mm3 Borislav Petkov
2005-04-11 22:22       ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12  4:20         ` Stas Sergeev [this message]
2005-04-12  4:27           ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12 19:37             ` [patch 0/3] 2.6.12-rc2-mm3 Stas Sergeev
2005-04-12 19:42             ` [patch 1/3]: move config option for BAD_SYSCALL_EXIT Stas Sergeev
2005-04-12 19:47             ` [patch 2/3]: entry.S trap return fixes Stas Sergeev
2005-04-13  2:09               ` Andrew Morton
2005-04-13  3:18                 ` Stas Sergeev
2005-04-12 19:54             ` [patch 3/3]: fix BAD_SYSCALL_EXIT lockup Stas Sergeev
2005-04-12 12:22           ` 2.6.12-rc2-mm3 Borislav Petkov
2005-04-11 10:34 ` 2.6.12-rc2-mm3 Jan Dittmer
2005-04-11 17:33 ` 2.6.12-rc2-mm3 Benoit Boissinot
2005-04-11 19:11 ` 2.6.12-rc2-mm3 Jindrich Makovicka
2005-04-12  0:22   ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12  8:21     ` 2.6.12-rc2-mm3 Jindrich Makovicka
2005-04-11 20:46 ` 2.6.12-rc2-mm3 Martin J. Bligh
2005-04-11 22:24   ` 2.6.12-rc2-mm3 Benoit Boissinot
2005-04-12 22:32     ` 2.6.12-rc2-mm3 Martin J. Bligh
2005-04-11 21:05 ` 2.6.12-rc2-mm3: CONFIG_MODULES=n MTD compile error Adrian Bunk
2005-04-11 21:07   ` Adrian Bunk
2005-04-12  1:18 ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-12  2:09   ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-12  3:26   ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-12  4:42     ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-12  6:34       ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-12 18:08         ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-12 22:40           ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-13  1:44             ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-15 18:23   ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-15 23:23     ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-17  8:40       ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-24  0:01         ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-24  1:59           ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-24  2:15             ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-04-24  3:14               ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-24  4:25               ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-24  9:53               ` 2.6.12-rc2-mm3 Oleg Nesterov
2005-04-24 23:11                 ` 2.6.12-rc2-mm3 Juergen Kreileder
2005-04-25  0:09                   ` 2.6.12-rc2-mm3 Benjamin Herrenschmidt
2005-05-03  6:29                 ` 2.6.12-rc2-mm3 Andrew Morton
2005-05-03 10:42                   ` 2.6.12-rc2-mm3 Oleg Nesterov
2005-04-12  5:00 ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12  5:51   ` 2.6.12-rc2-mm3 Nick Piggin
2005-04-12  6:19     ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12  6:49       ` 2.6.12-rc2-mm3 Nick Piggin
2005-04-12  7:50         ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-12 19:03           ` 2.6.12-rc2-mm3 Steven Pratt
2005-04-12 17:01       ` 2.6.12-rc2-mm3 Steven Pratt
2005-04-12  7:06   ` 2.6.12-rc2-mm3 Jens Axboe
2005-04-12 11:32 ` 2.6.12-rc2-mm3 Ed Tomlinson
2005-04-12 11:39   ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-14  0:15     ` 2.6.12-rc2-mm3 Ed Tomlinson
2005-04-14  0:20       ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-14  0:38         ` 2.6.12-rc2-mm3 Ed Tomlinson
2005-04-14  0:54           ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-17 21:32 ` [-mm patch] fix "make mandocs" Adrian Bunk
2005-04-17 22:27 ` 2.6.12-rc2-mm3 Alexander Nyberg
2005-04-17 22:36 ` 2.6.12-rc2-mm3 Alexander Nyberg
2005-04-19  2:03 ` 2.6.12-rc2-mm3: hostap: do not #include .c files Adrian Bunk
2005-04-19  2:12   ` Jouni Malinen
2005-04-19  2:12     ` Jouni Malinen
2005-04-26  0:49 ` 2.6.12-rc2-mm3 Randy.Dunlap
2005-04-26  1:06   ` 2.6.12-rc2-mm3 Andrew Morton
2005-04-26  3:17   ` 2.6.12-rc2-mm3 Greg KH
2005-04-26 16:15     ` 2.6.12-rc2-mm3 Randy.Dunlap
2005-04-27 10:41 ` 2.6.12-rc2-mm3 Alexander Nyberg
  -- strict thread matches above, loose matches on Subject: below --
2005-04-13 18:36 2.6.12-rc2-mm3 Stas Sergeev
2005-04-13 20:04 ` 2.6.12-rc2-mm3 Ingo Molnar
2005-04-14 16:38   ` 2.6.12-rc2-mm3 Stas Sergeev
2005-04-17 23:39 2.6.12-rc2-mm3 Mikael Pettersson
2005-04-18  9:56 ` 2.6.12-rc2-mm3 Alexander Nyberg
2005-04-18 11:05 ` 2.6.12-rc2-mm3 Alexander Nyberg
2005-04-18 11:14   ` 2.6.12-rc2-mm3 Arjan van de Ven
2005-04-18 14:10     ` 2.6.12-rc2-mm3 Alexander Nyberg
2005-04-18 22:27 2.6.12-rc2-mm3 Mikael Pettersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=425B4C92.1070507@aknet.ru \
    --to=stsp@aknet.ru \
    --cc=akpm@osdl.org \
    --cc=jamagallon@able.es \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkov@uni-muenster.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.