[Bluez-devel] No sound with Canyon CN-BTH1 and CN-BTU1

[Bluez-devel] No sound with Canyon CN-BTH1 and CN-BTU1

[Podologie Achilles]

[-- Attachment #1: Type: text/html, Size: 8342 bytes --]

[Bluez-devel] No sound with Canyon CN-BTH1 and CN-BTU1

[Teun]

Hi , i've a small problem with my headset en usb stick from canyon.

I have no sound with my canyon CN-BTH1

I compiled kernel 2.6.11.9 with build in alsa
usb bluetooth : Canyon CN-BTU1
headset : canyon CN-BTH1
distro : SuSE 9.2

when i changes the sound volume the headset response perfecty with
noise, but thats it.
I tried with another usb-stick BT180 from trust (also silicone wave chip
inside) but there is no difference.
Who can help me ?

Thanx anyway !


Loopback from kmix don't do anything, but i haven't test this before..

_starting :_

modprobe snd_bt_sco (start as root)
kmix (starting as user)

at this time kmix found  BT headset

starting btsco (as user)

achilles@office:~> btsco -v 00:0a:94:8e:3B:b8

btsco v0.4b
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected

when changing volume from mic of speaker in kmix it changed in my
headset and i see it changing on screen (btsco).

office:/home/achilles # hciconfig -a
hci0:   Type: USB
        BD Address: 00:0A:94:11:4F:8E ACL MTU: 120:20  SCO MTU: 64:0
        UP RUNNING PSCAN ISCAN
        RX bytes:763 acl:23 sco:0 events:45 errors:0
        TX bytes:678 acl:16 sco:0 commands:23 errors:0
        Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'BlueZ office (0)'
        Class: 0x100100
        Service Classes:
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
        Manufacturer: Silicon Wave (11)

office:/home/achilles # hciconfig hci0 revision
hci0:   Type: USB
        BD Address: 00:0A:94:11:4F:8E ACL MTU: 120:20  SCO MTU: 64:0
        Unsupported manufacturer

office:/home/achilles # hcitool info 00:0a:94:8e:3b:b8
Requesting information ...
        BD Address:  00:0a:94:8e:3b:b8
        Device Name: BT Headset-F
        LMP Version: 1.1 (0x1) LMP Subversion: 0x434
        Manufacturer: Cambridge Silicon Radio (10)
        Features: 0xfc 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
                <encryption> <slot offset> <timing accuracy> <role switch>
                <hold mode> <sniff mode> <park state> <RSSI> <channel
quality>
                <SCO link> <HV2 packets> <HV3 packets> <u-law log>
<A-law log>
                <CVSD> <paging scheme> <power control> <transparent SCO>

office:/home/achilles # hcidump -X
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff

(from another shell : )
achilles@office:~> aplay -B 100000 -D plughw:Headset
/opt/kde3/share/sounds/KDE_Startup_new.wav
Playing WAVE '/opt/kde3/share/sounds/KDE_Startup_new.wav' : Signed 16
bit Little Endian, Rate 22050 Hz, Stereo

hangs .... but info from btsco -V :

speaker volume: 0 mic volume: 0
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=15
Sending up speaker change 15
speaker volume: 15 mic volume: 1
driver is not in use
disconnected SCO channel


lot of output to hcidump :

> SCO data: handle 0x0100 dlen 48
    0000: 84 ff a6 ff dd ff b4 ff 90 ff 99 ff 76 ff 89 ff   ...........v...
    0010: 7b ff 53 ff 64 ff 44 ff 4b ff 6b ff 66 ff 8c ff   {.S.d.D.K.k.f...
    0020: 7c ff 7c ff 94 ff 6d ff 80 ff 81 ff 81 ff a6 ff   |.|...m.........
> SCO data: handle 0x0100 dlen 48
    0000: 6a ff 4d ff 66 ff 7f ff 9a ff 7e ff 81 ff a7 ff   j.M.f.....~.....
    0010: b7 ff b3 ff 97 ff 92 ff 98 ff aa ff 9c ff 7a ff   .............z.
    0020: 9a ff 9e ff 84 ff 85 ff 84 ff 88 ff 8d ff 8c ff   ...............
> SCO data: handle 0x0100 dlen 48
    0000: 81 ff 84 ff 8e ff 95 ff 9b ff 8c ff 90 ff 96 ff   ...............
    0010: 98 ff 9b ff 97 ff ad ff ac ff b5 ff d1 ff bc ff   ...............
    0020: af ff 9a ff 70 ff 91 ff 92 ff 6d ff a7 ff 93 ff   ...p.....m.....
> SCO data: handle 0x0100 dlen 48
    0000: 75 ff 8a ff 49 ff 55 ff 59 ff 44 ff 7a ff 81 ff   u...I.U.Y.D.z...
    0010: 7a ff 76 ff 8d ff ad ff 86 ff 7a ff 86 ff 8b ff   z.v.......z.....
    0020: 9e ff 98 ff a1 ff d0 ff e0 ff be ff 97 ff 93 ff   ...............
> SCO data: handle 0x0100 dlen 48
    0000: 9c ff 9d ff 82 ff 73 ff a2 ff 8b ff 6d ff 8e ff   .....s.....m...
    0010: 7c ff 7d ff 73 ff 74 ff b0 ff 9b ff 8c ff b5 ff   |.}.s.t.........
    0020: ad ff ae ff ae ff 9a ff af ff c1 ff bf ff b8 ff   ...............
and a lot more (pages)


finaly when i push a button on my headset (with disconnected SCO channel)
output from btsco :
recieved AT+CKPD=200













-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] No sound with Canyon CN-BTH1 and CN-BTU1

[Brad Midgley]

Podologie

> office:/home/achilles # hciconfig hci0 revision
> hci0:   Type: USB
>         BD Address: 00:0A:94:11:4F:8E ACL MTU: 120:20  SCO MTU: 64:0
>         Unsupported manufacturer

Did you say you had another usb adapter you could try? "Unsupported 
manufacturer" doesn't look good for voice. (Everything else should work 
though)

Brad


-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel