* [Bluez-users] BNEP session hangs, can't work out why.
@ 2005-05-29 16:40 Michael McConnell
2005-05-30 11:57 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Michael McConnell @ 2005-05-29 16:40 UTC (permalink / raw)
To: bluez-users
At machine A I have:
hci0: Type: USB
BD Address: 00:05:16:58:9D:C1 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:269283 acl:1781 sco:0 events:869 errors:0
TX bytes:58266 acl:815 sco:0 commands:42 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
Machine B has:
hci0: Type: USB
BD Address: 00:0A:94:13:26:7D ACL MTU: 120:20 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:72835 acl:1541 sco:0 events:1813 errors:0
TX bytes:266197 acl:2713 sco:0 commands:24 errors:0
Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
Manufacturer: Silicon Wave (11)
Everything starts fine, I can get packets flowing.
Then, without warning, the connection stalls.
hcidump on A finishes off with:
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 41
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 < ACL data: handle 41 flags 0x02 dlen 75
L2CAP(d): cid 0x0040 len 71 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
44.000000 > HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x13
Reason: Remote User Terminated Connection
Machine B reports:
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 > ACL data: handle 2 flags 0x02 dlen 67
L2CAP(d): cid 0x0040 len 63 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 59
L2CAP(d): cid 0x0040 len 55 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 > ACL data: handle 2 flags 0x02 dlen 67
L2CAP(d): cid 0x0040 len 63 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 59
L2CAP(d): cid 0x0040 len 55 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 24
L2CAP(d): cid 0x0040 len 260 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 9
L2CAP(d): cid 0x0040 len 365 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 > ACL data: handle 2 flags 0x02 dlen 67
L2CAP(d): cid 0x0040 len 63 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 38
L2CAP(d): cid 0x0040 len 274 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
handle 2
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 94
L2CAP(d): cid 0x0040 len 570 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 73
L2CAP(d): cid 0x0040 len 789 [psm 15]
BNEP: Compressed(0x02|0)
[proto 0x0800]
20.000000 < ACL data: handle 2 flags 0x02 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < ACL data: handle 2 flags 0x01 dlen 120
20.000000 < HCI Command: Disconnect (0x01|0x0006) plen 3
handle 2 reason 0x13
Reason: Remote User Terminated Connection
20.000000 > HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
20.000000 > HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 2 reason 0x16
Reason: Connection Terminated by Local Host
(Aside: The timestamps in hcidump don't appear to be working right.)
After this, trying 'hcitool info' on each querying the other just results in
"Connection timed out".
I can't work out which end is at fault.
Machine A is running an unpatched 2.4.30, machine B 2.4.28. (2.4.29 had USB
issues with my DVD burner.) Both are running bluez-libs and bluez-utils 2.17,
and bluz-hcidump 1.21.
--
-- Michael "Soruk" McConnell
Eridani Star System
MailStripper - "The easy spam filter."
http://mailstripper.eridani.co.uk/
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Bluez-users] BNEP session hangs, can't work out why.
2005-05-29 16:40 [Bluez-users] BNEP session hangs, can't work out why Michael McConnell
@ 2005-05-30 11:57 ` Marcel Holtmann
2005-06-01 18:06 ` Michael McConnell
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2005-05-30 11:57 UTC (permalink / raw)
To: bluez-users
Hi Michael,
> At machine A I have:
> hci0: Type: USB
> BD Address: 00:05:16:58:9D:C1 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:269283 acl:1781 sco:0 events:869 errors:0
> TX bytes:58266 acl:815 sco:0 commands:42 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> Manufacturer: Cambridge Silicon Radio (10)
>
> Machine B has:
> hci0: Type: USB
> BD Address: 00:0A:94:13:26:7D ACL MTU: 120:20 SCO MTU: 64:0
> UP RUNNING PSCAN ISCAN
> RX bytes:72835 acl:1541 sco:0 events:1813 errors:0
> TX bytes:266197 acl:2713 sco:0 commands:24 errors:0
> Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
> Manufacturer: Silicon Wave (11)
>
> Everything starts fine, I can get packets flowing.
>
> Then, without warning, the connection stalls.
>
> hcidump on A finishes off with:
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 41
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
> L2CAP(d): cid 0x0040 len 71 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 44.000000 > HCI Event: Disconn Complete (0x05) plen 4
> status 0x00 handle 41 reason 0x13
> Reason: Remote User Terminated Connection
>
> Machine B reports:
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
> L2CAP(d): cid 0x0040 len 55 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
> L2CAP(d): cid 0x0040 len 55 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 24
> L2CAP(d): cid 0x0040 len 260 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 9
> L2CAP(d): cid 0x0040 len 365 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
> L2CAP(d): cid 0x0040 len 63 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 38
> L2CAP(d): cid 0x0040 len 274 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 2
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 94
> L2CAP(d): cid 0x0040 len 570 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 73
> L2CAP(d): cid 0x0040 len 789 [psm 15]
> BNEP: Compressed(0x02|0)
> [proto 0x0800]
> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
> 20.000000 < HCI Command: Disconnect (0x01|0x0006) plen 3
> handle 2 reason 0x13
> Reason: Remote User Terminated Connection
> 20.000000 > HCI Event: Command Status (0x0f) plen 4
> Disconnect (0x01|0x0006) status 0x00 ncmd 1
> 20.000000 > HCI Event: Disconn Complete (0x05) plen 4
> status 0x00 handle 2 reason 0x16
> Reason: Connection Terminated by Local Host
>
> (Aside: The timestamps in hcidump don't appear to be working right.)
they are working for me. Use "hcidump -X -V" and in case of your mailer
it is better you attach it.
> After this, trying 'hcitool info' on each querying the other just results in
> "Connection timed out".
Show the hcidump for this, too.
> I can't work out which end is at fault.
Check dmesg for any error messages.
> Machine A is running an unpatched 2.4.30, machine B 2.4.28. (2.4.29 had USB
> issues with my DVD burner.) Both are running bluez-libs and bluez-utils 2.17,
> and bluz-hcidump 1.21.
What about using a 2.6.12-rc5 kernel?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] BNEP session hangs, can't work out why.
2005-05-30 11:57 ` Marcel Holtmann
@ 2005-06-01 18:06 ` Michael McConnell
2005-06-02 13:46 ` [Bluez-users] Bluez on Familiar 0.7.2 Bruno Campos
0 siblings, 1 reply; 4+ messages in thread
From: Michael McConnell @ 2005-06-01 18:06 UTC (permalink / raw)
To: bluez-users
Marcel Holtmann wrote:
> Hi Michael,
>
>>At machine A I have:
>>hci0: Type: USB
>> BD Address: 00:05:16:58:9D:C1 ACL MTU: 192:8 SCO MTU: 64:8
>> UP RUNNING PSCAN ISCAN
>> RX bytes:269283 acl:1781 sco:0 events:869 errors:0
>> TX bytes:58266 acl:815 sco:0 commands:42 errors:0
>> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
>> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'BlueZ (0)'
>> Class: 0x3e0100
>> Service Classes: Networking, Rendering, Capturing
>> Device Class: Computer, Uncategorized
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
>> Manufacturer: Cambridge Silicon Radio (10)
>>
>>Machine B has:
>>hci0: Type: USB
>> BD Address: 00:0A:94:13:26:7D ACL MTU: 120:20 SCO MTU: 64:0
>> UP RUNNING PSCAN ISCAN
>> RX bytes:72835 acl:1541 sco:0 events:1813 errors:0
>> TX bytes:266197 acl:2713 sco:0 commands:24 errors:0
>> Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
>> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'BlueZ (0)'
>> Class: 0x3e0100
>> Service Classes: Networking, Rendering, Capturing
>> Device Class: Computer, Uncategorized
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757
>> Manufacturer: Silicon Wave (11)
>>
>>Everything starts fine, I can get packets flowing.
>>
>>Then, without warning, the connection stalls.
>>
>>hcidump on A finishes off with:
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 41
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 < ACL data: handle 41 flags 0x02 dlen 75
>> L2CAP(d): cid 0x0040 len 71 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 44.000000 > HCI Event: Disconn Complete (0x05) plen 4
>> status 0x00 handle 41 reason 0x13
>> Reason: Remote User Terminated Connection
>>
>>Machine B reports:
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
>> L2CAP(d): cid 0x0040 len 63 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
>> L2CAP(d): cid 0x0040 len 55 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
>> L2CAP(d): cid 0x0040 len 63 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 59
>> L2CAP(d): cid 0x0040 len 55 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 24
>> L2CAP(d): cid 0x0040 len 260 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 9
>> L2CAP(d): cid 0x0040 len 365 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 > ACL data: handle 2 flags 0x02 dlen 67
>> L2CAP(d): cid 0x0040 len 63 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 38
>> L2CAP(d): cid 0x0040 len 274 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 > HCI Event: Number of Completed Packets (0x13) plen 5
>> handle 2
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 94
>> L2CAP(d): cid 0x0040 len 570 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 73
>> L2CAP(d): cid 0x0040 len 789 [psm 15]
>> BNEP: Compressed(0x02|0)
>> [proto 0x0800]
>> 20.000000 < ACL data: handle 2 flags 0x02 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < ACL data: handle 2 flags 0x01 dlen 120
>> 20.000000 < HCI Command: Disconnect (0x01|0x0006) plen 3
>> handle 2 reason 0x13
>> Reason: Remote User Terminated Connection
>> 20.000000 > HCI Event: Command Status (0x0f) plen 4
>> Disconnect (0x01|0x0006) status 0x00 ncmd 1
>> 20.000000 > HCI Event: Disconn Complete (0x05) plen 4
>> status 0x00 handle 2 reason 0x16
>> Reason: Connection Terminated by Local Host
>>
>>(Aside: The timestamps in hcidump don't appear to be working right.)
>
>
> they are working for me. Use "hcidump -X -V" and in case of your mailer
> it is better you attach it.
OK.
>>After this, trying 'hcitool info' on each querying the other just results in
>>"Connection timed out".
>
> Show the hcidump for this, too.
When querying A from B, I get:
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:05:16:58:9D:C1 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
(after a delay)
> HCI Event: Connect Complete (0x03) plen 11
status 0x24 handle 4 bdaddr 00:05:16:58:9D:C1 type ACL encrypt 0x00
Error: LMP PDU Not Allowed
with hcitool reporting:
Requesting information ...
Can't create connection: Connection timed out
This error is reported before the LMP PDU Not Allowed error.
When querying B from A, I get:
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0A:94:13:26:7D ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
(after a delay)
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 41 bdaddr 00:0A:94:13:26:7D type ACL encrypt 0x00
Error: LMP Response Timeout
with hcitool also reporting:
Requesting information ...
Can't create connection: Connection timed out
Again, this error is reported before hcidump reports the timeout.
>>I can't work out which end is at fault.
>
> Check dmesg for any error messages.
Machine B reports:
hci_acl_tx_to: hci0 ACL tx timeout
hci_acl_tx_to: hci0 killing stalled ACL connection C1:9D:58:16:05:00
Machine A has no error messages.
I also paired both machines to my mobile phone.
Machine A reports with "hcitool info 00:0A:28:F8:76:C2
Requesting information ...
BD Address: 00:0A:28:F8:76:C2
Device Name: Motorola V500
LMP Version: 1.1 (0x1) LMP Subversion: 0x700
Manufacturer: Broadcom Corporation (15)
Features: 0xff 0xff 0x0d 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot
offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <power
control>
<transparent SCO>
Machine B, however just gives:
Requesting information ...
Can't create connection: Connection timed out
The hcidump is:
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0A:28:F8:76:C2 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x24 handle 6 bdaddr 00:0A:28:F8:76:C2 type ACL encrypt 0x00
Error: LMP PDU Not Allowed
Before running BNEP and getting the link to stall, machine B gives the
same "hcitool info" output as Machine A above.
When getting my phone to scan for devices, both machines are found;
machine A is identified by name, but machine B is only identified after
some delay and then only by a string generated from the MAC address.
hcidump on both machines didn't show anything from doing this scan.
When I try to send a phonebook item, machine A refuses the connection
straight away (as I'd expect), but machine B just times out.
After I reset the bluetooth layer on machine B, it can see the phone
just as machine A can.
>>Machine A is running an unpatched 2.4.30, machine B 2.4.28. (2.4.29 had USB
>>issues with my DVD burner.) Both are running bluez-libs and bluez-utils 2.17,
>>and bluz-hcidump 1.21.
>
> What about using a 2.6.12-rc5 kernel?
That's to come, but they're both production systems so it's something
I'm wary about. However, I've since upgraded machine B to 2.4.30.
--
-- Michael "Soruk" McConnell
Eridani Star System
MailStripper - "The easy spam filter."
http://mailstripper.eridani.co.uk/
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bluez-users] Bluez on Familiar 0.7.2
2005-06-01 18:06 ` Michael McConnell
@ 2005-06-02 13:46 ` Bruno Campos
0 siblings, 0 replies; 4+ messages in thread
From: Bruno Campos @ 2005-06-02 13:46 UTC (permalink / raw)
To: bluez-users
[-- Attachment #1: Type: text/plain, Size: 1164 bytes --]
Hi there,
I have on ipaq 5500 with:
a.. Familiar 0.7.2
b.. Blackdown 1.3.1
And i think that my Blutooth have a problem, because going down after a few minutes, if a try hcidump gives the follows error:
HCI Event: Hardware Error(0x10) plen 1
So anyone knows if is necessary install new packages? Please if anyone have blutooth on familiar 0.7.2, what packages you intalled.
Best Regards
DISCLAIMER: This message may contain confidential information or privileged material and is intended only for the individual(s) named. If you are not a named addressee and mistakenly received this message you should not copy or otherwise disseminate it: please delete this e-mail from your system and notify the sender immediately. E-mail transmissions are not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete or contain viruses. Therefore, the sender does not accept liability for any errors or omissions in the contents of this message that arise as a result of e-mail transmissions. Please request a hard copy version if verification is required. Critical Software.
[-- Attachment #2: Type: text/html, Size: 1939 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-06-02 13:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-29 16:40 [Bluez-users] BNEP session hangs, can't work out why Michael McConnell
2005-05-30 11:57 ` Marcel Holtmann
2005-06-01 18:06 ` Michael McConnell
2005-06-02 13:46 ` [Bluez-users] Bluez on Familiar 0.7.2 Bruno Campos
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.