Re: RFC: NAPI packet weighting patch

[Eric Dumazet <dada1@cosmosbay.com>]

Eric Dumazet a écrit :

> 
> Then maybe we could also play with prefetchw() in the case the incoming 
> frame
> is small enough to be copied to a new skb.
> 
> drivers/net/tg3.c
> 
>     copy_skb = dev_alloc_skb(len + 2);
>     if (copy_skb == NULL)
>         goto drop_it_no_recycle;
> +    prefetchw(copy_skb->data);
> 
>     copy_skb->dev = tp->dev;
>     skb_reserve(copy_skb, 2);
>     skb_put(copy_skb, len);
> 
> 
> 

I also found that the memcpy() done to copy the data to the new skb suffers from misalignment.

This is because of skb_reserve(skbs, 2) that was done on both skb, and memcpy() (at least on x86_64) doing long word copies without checking 
alignment of source or destination.

Maybe we could :

1) make sure both skbs had the same skb_reserve() of 2 (thats not clear because tg3.c mixes the '2' and tp->rx_offset,
and according to a comment :
	rx_offset != 2 iff this is a 5701 card running 
                                          	in PCI-X mode

2) and do :

-	memcpy(copy_skb->data, skb->data, len);
+	memcpy(copy_skb->data-2, skb->data-2, len+2);

(That is copy 2 more bytes, but gain aligned copy to speedup memcpy())

Eric Dumazet