* Crosstools for MALTA MIPS in little endian @ 2006-04-21 15:08 Shyamal Sadanshio 2006-04-21 15:11 ` Nigel Stephens 0 siblings, 1 reply; 11+ messages in thread From: Shyamal Sadanshio @ 2006-04-21 15:08 UTC (permalink / raw) To: linux-mips Hi, I am come across the MALTA specific stable kernel (2.6.12-rc6) available on linux-malta.git repository. I have cloned this repository and would like to build it with the compatible toolchain in little endian mode. Can anyone please let me know the toolchain specification (gcc/glibc/binutils version specifcations) that have been used or can be used for compiling the 2.6.12 kernel? I tried to build the few toolchain combination from automated script (demo-mipsel.sh) available at kegel.com, but they are failing. My native OS is Red Hat 9 (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5). Thanks and Regards, Shyamal ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-21 15:08 Crosstools for MALTA MIPS in little endian Shyamal Sadanshio @ 2006-04-21 15:11 ` Nigel Stephens 2006-04-26 8:45 ` Shyamal Sadanshio 0 siblings, 1 reply; 11+ messages in thread From: Nigel Stephens @ 2006-04-21 15:11 UTC (permalink / raw) To: Shyamal Sadanshio; +Cc: linux-mips Shyamal Sadanshio wrote: > Hi, > > I am come across the MALTA specific stable kernel (2.6.12-rc6) > available on linux-malta.git repository. > I have cloned this repository and would like to build it with the > compatible toolchain in little endian mode. > > Can anyone please let me know the toolchain specification > (gcc/glibc/binutils version specifcations) that have been used or can > be used for compiling the 2.6.12 kernel? > > > See http://www.linux-mips.org/wiki/Toolchains#MIPS_SDE Regards Nigel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-21 15:11 ` Nigel Stephens @ 2006-04-26 8:45 ` Shyamal Sadanshio 2006-04-26 19:00 ` Nigel Stephens 2006-04-26 22:12 ` Ralf Baechle 0 siblings, 2 replies; 11+ messages in thread From: Shyamal Sadanshio @ 2006-04-26 8:45 UTC (permalink / raw) To: linux-mips; +Cc: Nigel Stephens Hi, I am facing boot problem with the Malta specific 2.6.12-rc6 kernel. The kernel is not booting up on our Malta 4kc development board. I do not see any error messages on the minicom window. Has anyone tried this kernel since it I got this kernel after cloning the linux-malta.git repository? I had build this kernel with SDE cross-toolchain in little endian mode (gcc-3.4.4). Thanks and Regards, Shyamal On 4/21/06, Nigel Stephens <nigel@mips.com> wrote: > > > Shyamal Sadanshio wrote: > > Hi, > > > > I am come across the MALTA specific stable kernel (2.6.12-rc6) > > available on linux-malta.git repository. > > I have cloned this repository and would like to build it with the > > compatible toolchain in little endian mode. > > > > Can anyone please let me know the toolchain specification > > (gcc/glibc/binutils version specifcations) that have been used or can > > be used for compiling the 2.6.12 kernel? > > > > > > > > See http://www.linux-mips.org/wiki/Toolchains#MIPS_SDE > > Regards > > Nigel > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-26 8:45 ` Shyamal Sadanshio @ 2006-04-26 19:00 ` Nigel Stephens 2006-04-26 22:12 ` Ralf Baechle 1 sibling, 0 replies; 11+ messages in thread From: Nigel Stephens @ 2006-04-26 19:00 UTC (permalink / raw) To: Shyamal Sadanshio; +Cc: linux-mips Shyamal Sadanshio wrote: > Hi, > > I am facing boot problem with the Malta specific 2.6.12-rc6 kernel. > The kernel is not booting up on our Malta 4kc development board. > I do not see any error messages on the minicom window. > So what do you see? Please cut-and-paste the full YAMON sign-on and kernel boot sequence and send to the list. What are you using for a root file system? A copy of your .config file would be useful too. Nigel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-26 8:45 ` Shyamal Sadanshio 2006-04-26 19:00 ` Nigel Stephens @ 2006-04-26 22:12 ` Ralf Baechle 2006-04-26 22:18 ` Ralf Baechle 2006-04-27 6:39 ` Shyamal Sadanshio 1 sibling, 2 replies; 11+ messages in thread From: Ralf Baechle @ 2006-04-26 22:12 UTC (permalink / raw) To: Shyamal Sadanshio; +Cc: linux-mips, Nigel Stephens On Wed, Apr 26, 2006 at 02:15:29PM +0530, Shyamal Sadanshio wrote: > I am facing boot problem with the Malta specific 2.6.12-rc6 kernel. > The kernel is not booting up on our Malta 4kc development board. > I do not see any error messages on the minicom window. In case you're using the default configuration file, it's set to MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have a 4Kc and not a 4Kec? The latter is an R2 processor. Ralf ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-26 22:12 ` Ralf Baechle @ 2006-04-26 22:18 ` Ralf Baechle 2006-04-27 5:59 ` Kishore K 2006-04-27 6:39 ` Shyamal Sadanshio 1 sibling, 1 reply; 11+ messages in thread From: Ralf Baechle @ 2006-04-26 22:18 UTC (permalink / raw) To: Shyamal Sadanshio; +Cc: linux-mips, Nigel Stephens On Wed, Apr 26, 2006 at 11:12:54PM +0100, Ralf Baechle wrote: > In case you're using the default configuration file, it's set to > MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have a > 4Kc and not a 4Kec? The latter is an R2 processor. Argh. I meant: In case you're using the default configuration file, it's set to MIPS32R2 but the 4Kc is an R1 processor. Are you sure you really have a 4Kc and not a 4Kec? The latter is an R2 processor. Ralf ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-26 22:18 ` Ralf Baechle @ 2006-04-27 5:59 ` Kishore K 2006-04-27 10:32 ` Shyamal Sadanshio 0 siblings, 1 reply; 11+ messages in thread From: Kishore K @ 2006-04-27 5:59 UTC (permalink / raw) To: Ralf Baechle; +Cc: Shyamal Sadanshio, linux-mips, Nigel Stephens [-- Attachment #1.1: Type: text/plain, Size: 1151 bytes --] On 4/27/06, Ralf Baechle <ralf@linux-mips.org> wrote: > > On Wed, Apr 26, 2006 at 11:12:54PM +0100, Ralf Baechle wrote: > > > In case you're using the default configuration file, it's set to > > MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have a > > 4Kc and not a 4Kec? The latter is an R2 processor. > > Argh. I meant: > > In case you're using the default configuration file, it's set to > MIPS32R2 but the 4Kc is an R1 processor. Are you sure you really have a > 4Kc and not a 4Kec? The latter is an R2 processor. > > > Ralf I configured the kernel as required for 4Kc, but could not bring up the board. The configuration file is enclosed along with this mail (configured for big endian). As I mentioned in the other thread, the board comes up, when I replace arch/mips/mips-boards/generic/pci.c file in 2.6.16 kernel with the file from 2.6.10 with the appropriate changes required, to pci.cfile. But, I am not sure, whether my approach is correct and what is going wrong with 2.6.16 kernel. Currently, I am looking into it. If any of you have idea, please let me know. thanks, --kishore [-- Attachment #1.2: Type: text/html, Size: 1525 bytes --] [-- Attachment #2: config --] [-- Type: application/octet-stream, Size: 15407 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16 # Tue Apr 25 19:36:12 2006 # CONFIG_MIPS=y # # Machine selection # # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set # CONFIG_MIPS_PB1550 is not set # CONFIG_MIPS_PB1200 is not set # CONFIG_MIPS_DB1000 is not set # CONFIG_MIPS_DB1100 is not set # CONFIG_MIPS_DB1500 is not set # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set # CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set # CONFIG_MOMENCO_OCELOT_3 is not set # CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set # CONFIG_DDB5074 is not set # CONFIG_DDB5476 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SNI_RM200_PCI is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_MIPS_BONITO64=y CONFIG_MIPS_MSC=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_BOARDS_GEN=y CONFIG_MIPS_GT64120=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_SYS_HAS_CPU_MIPS32_R2=y CONFIG_SYS_HAS_CPU_MIPS64_R1=y CONFIG_SYS_HAS_CPU_NEVADA=y CONFIG_SYS_HAS_CPU_RM7000=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y # # Kernel type # CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SHMEM is not set CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # # CONFIG_LBD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_LAN_SAA9730 is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # # CONFIG_INPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=32 # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # # Multimedia Capabilities Port drivers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # # CONFIG_NLS is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # # Security options # # CONFIG_KEYS is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Hardware crypto devices # # # Library routines # # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-27 5:59 ` Kishore K @ 2006-04-27 10:32 ` Shyamal Sadanshio 2006-04-27 12:36 ` Kishore K 0 siblings, 1 reply; 11+ messages in thread From: Shyamal Sadanshio @ 2006-04-27 10:32 UTC (permalink / raw) To: Kishore K; +Cc: Ralf Baechle, linux-mips, Nigel Stephens Hello Kishore, Following the history of "problem with MALTA thread", you had mentioned that you will try with 2.16 binutils. Have you tried with 2.16 version? Regarding 2.6.12 kernel version, it is put under stable MALTA git repository so most likely it could have been validated for MALTA platform. Regarding pci.c file of 2.6.10 version, Can you please pass me that file so I will just try directly in my 2.6.12 kernel and see if it works? Thanks and Regards, Shyamal On 4/27/06, Kishore K <hellokishore@gmail.com> wrote: > On 4/27/06, Ralf Baechle <ralf@linux-mips.org> wrote: > > > > On Wed, Apr 26, 2006 at 11:12:54PM +0100, Ralf Baechle wrote: > > > > > In case you're using the default configuration file, it's set to > > > MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have > a > > > 4Kc and not a 4Kec? The latter is an R2 processor. > > > > Argh. I meant: > > > > In case you're using the default configuration file, it's set to > > MIPS32R2 but the 4Kc is an R1 processor. Are you sure you really have a > > 4Kc and not a 4Kec? The latter is an R2 processor. > > > > > > Ralf > > > I configured the kernel as required for 4Kc, but could not bring up the > board. The configuration file is enclosed along with this mail (configured > for big endian). As I mentioned in the other thread, the board comes up, > when I replace arch/mips/mips-boards/generic/pci.c file in 2.6.16 kernel > with the file from 2.6.10 with the appropriate changes required, to > pci.cfile. But, I am not sure, whether my approach is correct and what > is going > wrong with 2.6.16 kernel. Currently, I am looking into it. If any of you > have idea, please let me know. > > thanks, > --kishore > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-27 10:32 ` Shyamal Sadanshio @ 2006-04-27 12:36 ` Kishore K 0 siblings, 0 replies; 11+ messages in thread From: Kishore K @ 2006-04-27 12:36 UTC (permalink / raw) To: Shyamal Sadanshio; +Cc: Ralf Baechle, linux-mips, Nigel Stephens [-- Attachment #1.1: Type: text/plain, Size: 770 bytes --] On 4/27/06, Shyamal Sadanshio <shyamal.sadanshio@gmail.com> wrote: > > Hello Kishore, > > Following the history of "problem with MALTA thread", you had > mentioned that you will try with 2.16 binutils. Have you tried with > 2.16 version? Yes. but without success. Regarding 2.6.12 kernel version, it is put under stable MALTA git > repository so most likely it could have been validated for MALTA > platform. I was using tar balls from linux-mips, rather than from MALTA git repository. Regarding pci.c file of 2.6.10 version, Can you please pass me that > file so I will just try directly in my 2.6.12 kernel and see if it > works? Please find the file (arch/mips/mips-boards/generic/pci.c) enclosed along with this mail. --kishore [-- Attachment #1.2: Type: text/html, Size: 1575 bytes --] [-- Attachment #2: pci.c --] [-- Type: text/plain, Size: 4462 bytes --] /* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. * * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * * MIPS boards specific PCI support. */ #include <linux/config.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> #include <linux/init.h> #include <asm/mips-boards/generic.h> #include <asm/gt64120.h> #include <asm/mips-boards/bonito64.h> #include <asm/mips-boards/msc01_pci.h> #ifdef CONFIG_MIPS_MALTA #include <asm/mips-boards/malta.h> #endif static struct resource bonito64_mem_resource = { .name = "Bonito PCI MEM", .start = 0x10000000UL, .end = 0x1bffffffUL, .flags = IORESOURCE_MEM, }; static struct resource bonito64_io_resource = { .name = "Bonito IO MEM", .start = 0x00002000UL, /* avoid conflicts with YAMON allocated I/O addresses */ .end = 0x000fffffUL, .flags = IORESOURCE_IO, }; static struct resource gt64120_mem_resource = { .name = "GT64120 PCI MEM", .start = 0x10000000UL, .end = 0x1bdfffffUL, .flags = IORESOURCE_MEM, }; static struct resource gt64120_io_resource = { .name = "GT64120 IO MEM", #ifdef CONFIG_MIPS_ATLAS .start = 0x18000000UL, .end = 0x181fffffUL, #endif #ifdef CONFIG_MIPS_MALTA .start = 0x00002000UL, .end = 0x001fffffUL, #endif .flags = IORESOURCE_IO, }; static struct resource msc_mem_resource = { .name = "MSC PCI MEM", .start = 0x10000000UL, .end = 0x1fffffffUL, .flags = IORESOURCE_MEM, }; static struct resource msc_io_resource = { .name = "MSC IO MEM", .start = 0x00002000UL, .end = 0x007fffffUL, .flags = IORESOURCE_IO, }; extern struct pci_ops bonito64_pci_ops; extern struct pci_ops gt64120_pci_ops; extern struct pci_ops msc_pci_ops; static struct pci_controller bonito64_controller = { .pci_ops = &bonito64_pci_ops, .io_resource = &bonito64_io_resource, .mem_resource = &bonito64_mem_resource, .mem_offset = 0x10000000UL, .io_offset = 0x00000000UL, }; static struct pci_controller gt64120_controller = { .pci_ops = >64120_pci_ops, .io_resource = >64120_io_resource, .mem_resource = >64120_mem_resource, .mem_offset = 0x00000000UL, .io_offset = 0x00000000UL, }; static struct pci_controller msc_controller = { .pci_ops = &msc_pci_ops, .io_resource = &msc_io_resource, .mem_resource = &msc_mem_resource, .mem_offset = 0x10000000UL, .io_offset = 0x00000000UL, }; void __init mips_pcibios_init(void) { struct pci_controller *controller; switch (mips_revision_corid) { case MIPS_REVISION_CORID_QED_RM5261: case MIPS_REVISION_CORID_CORE_LV: case MIPS_REVISION_CORID_CORE_FPGA: case MIPS_REVISION_CORID_CORE_FPGAR2: /* * Due to a bug in the Galileo system controller, we need * to setup the PCI BAR for the Galileo internal registers. * This should be done in the bios/bootprom and will be * fixed in a later revision of YAMON (the MIPS boards * boot prom). */ GT_WRITE(GT_PCI0_CFGADDR_OFS, (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ GT_PCI0_CFGADDR_CONFIGEN_BIT ); /* Perform the write */ GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); controller = >64120_controller; break; case MIPS_REVISION_CORID_BONITO64: case MIPS_REVISION_CORID_CORE_20K: case MIPS_REVISION_CORID_CORE_EMUL_BON: controller = &bonito64_controller; break; case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_EMUL_MSC: controller = &msc_controller; break; default: return ; } ioport_resource.end = controller->io_resource->end; register_pci_controller (controller); return ; } early_initcall(pcibios_init); ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-26 22:12 ` Ralf Baechle 2006-04-26 22:18 ` Ralf Baechle @ 2006-04-27 6:39 ` Shyamal Sadanshio 2006-04-27 10:16 ` Shyamal Sadanshio 1 sibling, 1 reply; 11+ messages in thread From: Shyamal Sadanshio @ 2006-04-27 6:39 UTC (permalink / raw) To: Ralf Baechle, Nigel Stephens; +Cc: linux-mips [-- Attachment #1: Type: text/plain, Size: 1937 bytes --] Hi Nigel, Ralf, Yes, I'm using the default config with option set to R1 processor. I am using NFS filesystem and loading the image through ethernet using minicom. Here's the sequence: Start NFS service load tftp://192.168.2.237/vmlinux.srec go .nfsroot=192.168.2.237/linux/mipsel ip=192.168.2.24 Here's the YAMON boot message: NUX started... Config serial console: console=ttyS0,38400n8r * Exception (user) : Breakpoint * CAUSE = 0x10808024 STATUS = 0x10002c02 CONFIG = 0x80030083 CONFIG1 = 0x1e9b4d8a EPC = 0x80549830 ERROREPC = 0x80029cf4 BADVADDR = 0xffffffff HI = 0x00000000 LO = 0x04000000 $ 0(zr):0x00000000 $ 8(t0):0x804c18dc $16(s0):0x8056d0b8 $24(t8):0x804bfddd $ 1(at):0x10002c00 $ 9(t1):0x0000007f $17(s1):0x80490000 $25(t9):0x80571f77 $ 2(v0):0xffffffff $10(t2):0x00000040 $18(s2):0x80570000 $26(k0):0x00000000 $ 3(v1):0xffffffe1 $11(t3):0x80570000 $19(s3):0x8056d0bc $27(k1):0x00000000 $ 4(a0):0x00000040 $12(t4):0x80570000 $20(s4):0x00000000 $28(gp):0x804be000 $ 5(a1):0x00000000 $13(t5):0x00000000 $21(s5):0x804bffc0 $29(sp):0x804bff50 $ 6(a2):0x08000000 $14(t6):0x80571b91 $22(s6):0x00000000 $30(s8):0x8009e0c0 $ 7(a3):0xbbe00000 $15(t7):0x00000010 $23(s7):0x00000000 $31(ra):0x8054b22c I have attached my config file along with this mail. Thanks and Regards, Shyamal On 4/27/06, Ralf Baechle <ralf@linux-mips.org> wrote: > On Wed, Apr 26, 2006 at 02:15:29PM +0530, Shyamal Sadanshio wrote: > > > I am facing boot problem with the Malta specific 2.6.12-rc6 kernel. > > The kernel is not booting up on our Malta 4kc development board. > > I do not see any error messages on the minicom window. > > In case you're using the default configuration file, it's set to > MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have a > 4Kc and not a 4Kec? The latter is an R2 processor. > > Ralf > [-- Attachment #2: config1.txt --] [-- Type: text/plain, Size: 22316 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.12-rc6 # Thu Apr 27 11:31:46 2006 # CONFIG_MIPS=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # # CONFIG_MODULES is not set # # Machine selection # # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set # CONFIG_MIPS_PB1550 is not set # CONFIG_MIPS_PB1200 is not set # CONFIG_MIPS_DB1000 is not set # CONFIG_MIPS_DB1100 is not set # CONFIG_MIPS_DB1500 is not set # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set # CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set # CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_MIPSSIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set # CONFIG_MOMENCO_OCELOT_3 is not set # CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_DDB5074 is not set # CONFIG_DDB5476 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_SWARM is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SNI_RM200_PCI is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_MIPS_BONITO64=y CONFIG_MIPS_MSC=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_BOARDS_GEN=y CONFIG_MIPS_GT64120=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # CONFIG_CPU_MIPS32R1=y # CONFIG_CPU_MIPS32R2 is not set # CONFIG_CPU_MIPS64R1 is not set # CONFIG_CPU_MIPS64R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y # # Kernel type # CONFIG_MIPS32=y # CONFIG_MIPS64 is not set CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_CPU_HAS_PREFETCH is not set CONFIG_VTAG_ICACHE=y CONFIG_CPU_MIPS32_24K=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y # CONFIG_PREEMPT is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_SCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_TUNNEL=y CONFIG_IP_TCPDIAG=y CONFIG_IP_TCPDIAG_IPV6=y # # IP: Virtual Server Configuration # CONFIG_IP_VS=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=y CONFIG_IP_VS_WRR=y CONFIG_IP_VS_LC=y CONFIG_IP_VS_WLC=y CONFIG_IP_VS_LBLC=y CONFIG_IP_VS_LBLCR=y CONFIG_IP_VS_DH=y CONFIG_IP_VS_SH=y CONFIG_IP_VS_SED=y CONFIG_IP_VS_NQ=y # # IPVS application helper # CONFIG_IP_VS_FTP=y CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y CONFIG_INET6_TUNNEL=y CONFIG_IPV6_TUNNEL=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y CONFIG_IP_NF_CT_PROTO_SCTP=y CONFIG_IP_NF_FTP=y CONFIG_IP_NF_IRC=y CONFIG_IP_NF_TFTP=y CONFIG_IP_NF_AMANDA=y CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_MATCH_PHYSDEV=y CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_MATCH_REALM=y CONFIG_IP_NF_MATCH_SCTP=y CONFIG_IP_NF_MATCH_COMMENT=y CONFIG_IP_NF_MATCH_CONNMARK=y CONFIG_IP_NF_MATCH_HASHLIMIT=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_SAME=y CONFIG_IP_NF_NAT_SNMP_BASIC=y CONFIG_IP_NF_NAT_IRC=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_NAT_TFTP=y CONFIG_IP_NF_NAT_AMANDA=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_CLASSIFY=y CONFIG_IP_NF_TARGET_CONNMARK=y CONFIG_IP_NF_TARGET_CLUSTERIP=y CONFIG_IP_NF_RAW=y CONFIG_IP_NF_TARGET_NOTRACK=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # # IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=y CONFIG_IP6_NF_IPTABLES=y CONFIG_IP6_NF_MATCH_LIMIT=y CONFIG_IP6_NF_MATCH_MAC=y CONFIG_IP6_NF_MATCH_RT=y CONFIG_IP6_NF_MATCH_OPTS=y CONFIG_IP6_NF_MATCH_FRAG=y CONFIG_IP6_NF_MATCH_HL=y CONFIG_IP6_NF_MATCH_MULTIPORT=y CONFIG_IP6_NF_MATCH_OWNER=y CONFIG_IP6_NF_MATCH_MARK=y CONFIG_IP6_NF_MATCH_IPV6HEADER=y CONFIG_IP6_NF_MATCH_AHESP=y CONFIG_IP6_NF_MATCH_LENGTH=y CONFIG_IP6_NF_MATCH_EUI64=y CONFIG_IP6_NF_MATCH_PHYSDEV=y CONFIG_IP6_NF_FILTER=y CONFIG_IP6_NF_TARGET_LOG=y CONFIG_IP6_NF_MANGLE=y CONFIG_IP6_NF_TARGET_MARK=y CONFIG_IP6_NF_RAW=y # # Bridge: Netfilter Configuration # CONFIG_BRIDGE_NF_EBTABLES=y CONFIG_BRIDGE_EBT_BROUTE=y CONFIG_BRIDGE_EBT_T_FILTER=y CONFIG_BRIDGE_EBT_T_NAT=y CONFIG_BRIDGE_EBT_802_3=y CONFIG_BRIDGE_EBT_AMONG=y CONFIG_BRIDGE_EBT_ARP=y CONFIG_BRIDGE_EBT_IP=y CONFIG_BRIDGE_EBT_LIMIT=y CONFIG_BRIDGE_EBT_MARK=y CONFIG_BRIDGE_EBT_PKTTYPE=y CONFIG_BRIDGE_EBT_STP=y CONFIG_BRIDGE_EBT_VLAN=y CONFIG_BRIDGE_EBT_ARPREPLY=y CONFIG_BRIDGE_EBT_DNAT=y CONFIG_BRIDGE_EBT_MARK_T=y CONFIG_BRIDGE_EBT_REDIRECT=y CONFIG_BRIDGE_EBT_SNAT=y CONFIG_BRIDGE_EBT_LOG=y CONFIG_BRIDGE_EBT_ULOG=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATM is not set CONFIG_BRIDGE=y CONFIG_VLAN_8021Q=y # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y CONFIG_IPDDP=y CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y CONFIG_NET_SCH_INGRESS=y CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y # CONFIG_CLS_U32_PERF is not set CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_LAN_SAA9730 is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # # XFS support # CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Crosstools for MALTA MIPS in little endian 2006-04-27 6:39 ` Shyamal Sadanshio @ 2006-04-27 10:16 ` Shyamal Sadanshio 0 siblings, 0 replies; 11+ messages in thread From: Shyamal Sadanshio @ 2006-04-27 10:16 UTC (permalink / raw) To: Ralf Baechle, Nigel Stephens; +Cc: linux-mips Hi All, To further to add on to info and to bring one point to notice, I had build my kernel with SDE toolset (gcc version 3.4.4 mipssde-6.02.03-20050629) and binutils 2.15.94 (for e.g., GNU objcopy 2.15.94 mipssde-6.02.03-20050629) It is mentioned on SDE site, that the SDE package will only install compiler but I found that it installed binutils package also. I am going to try with binutils 2.16 and lets see if it helps. Thanks and Regards, Shyamal On 4/27/06, Shyamal Sadanshio <shyamal.sadanshio@gmail.com> wrote: > Hi Nigel, Ralf, > > Yes, I'm using the default config with option set to R1 processor. > I am using NFS filesystem and loading the image through ethernet using > minicom. > > Here's the sequence: > Start NFS service > load tftp://192.168.2.237/vmlinux.srec > go .nfsroot=192.168.2.237/linux/mipsel ip=192.168.2.24 > > Here's the YAMON boot message: > NUX started... > Config serial console: console=ttyS0,38400n8r > > * Exception (user) : Breakpoint * > CAUSE = 0x10808024 STATUS = 0x10002c02 > CONFIG = 0x80030083 CONFIG1 = 0x1e9b4d8a > EPC = 0x80549830 ERROREPC = 0x80029cf4 > BADVADDR = 0xffffffff HI = 0x00000000 > LO = 0x04000000 > > $ 0(zr):0x00000000 $ 8(t0):0x804c18dc $16(s0):0x8056d0b8 > $24(t8):0x804bfddd > $ 1(at):0x10002c00 $ 9(t1):0x0000007f $17(s1):0x80490000 > $25(t9):0x80571f77 > $ 2(v0):0xffffffff $10(t2):0x00000040 $18(s2):0x80570000 > $26(k0):0x00000000 > $ 3(v1):0xffffffe1 $11(t3):0x80570000 $19(s3):0x8056d0bc > $27(k1):0x00000000 > $ 4(a0):0x00000040 $12(t4):0x80570000 $20(s4):0x00000000 > $28(gp):0x804be000 > $ 5(a1):0x00000000 $13(t5):0x00000000 $21(s5):0x804bffc0 > $29(sp):0x804bff50 > $ 6(a2):0x08000000 $14(t6):0x80571b91 $22(s6):0x00000000 > $30(s8):0x8009e0c0 > $ 7(a3):0xbbe00000 $15(t7):0x00000010 $23(s7):0x00000000 > $31(ra):0x8054b22c > > I have attached my config file along with this mail. > > Thanks and Regards, > Shyamal > > > On 4/27/06, Ralf Baechle <ralf@linux-mips.org> wrote: > > On Wed, Apr 26, 2006 at 02:15:29PM +0530, Shyamal Sadanshio wrote: > > > > > I am facing boot problem with the Malta specific 2.6.12-rc6 kernel. > > > The kernel is not booting up on our Malta 4kc development board. > > > I do not see any error messages on the minicom window. > > > > In case you're using the default configuration file, it's set to > > MIPS32R1 but the 4Kc is an R1 processor. Are you sure you really have a > > 4Kc and not a 4Kec? The latter is an R2 processor. > > > > Ralf > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2006-04-27 12:36 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-04-21 15:08 Crosstools for MALTA MIPS in little endian Shyamal Sadanshio 2006-04-21 15:11 ` Nigel Stephens 2006-04-26 8:45 ` Shyamal Sadanshio 2006-04-26 19:00 ` Nigel Stephens 2006-04-26 22:12 ` Ralf Baechle 2006-04-26 22:18 ` Ralf Baechle 2006-04-27 5:59 ` Kishore K 2006-04-27 10:32 ` Shyamal Sadanshio 2006-04-27 12:36 ` Kishore K 2006-04-27 6:39 ` Shyamal Sadanshio 2006-04-27 10:16 ` Shyamal Sadanshio
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.