Re: dosemu -t problem

Re: dosemu -t problem

[Brecht Hoflack]

Clarence Dang wrote:
> On Friday 05 May 2006 23:54, Brecht Hoflack wrote:
>   
>> i am using DOSEMU 1.3.3 with direct hardware graphics.  When i call
>> dosemu with the dosemu -t command the direct graphics don't seem to
>> work.  
>>     
>
> dosemu -s
>   
I was actually using dosemu -s -t.  When trying to do this in a Xterm
the graphical part is not working (probably caused by the -t switch).  
So how can i run run Dosemu in X without starting XDosemu (and without
using the -t switch).
>   
>> Also the Break is mapped as Control X C instead of the Control 
>> Break sequence.  Does somebody have an idea what may cause this error?
>>     
>
> Make sure $_rawkeyboard = (1).  I think dosemu -s covers that these days 
> though but you should check.
>   
It was already configured this way.  Control Break does not work using
the -t switch however.
>   
>> I would like to use the -t switch to use the terminal version of Dosemu.
>>     
>
> dosemu -t is only for text in consoles.  Useful for xterm's with scrollable 
> history.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   

Re: dosemu -t problem

[Clarence Dang]

On Tuesday 09 May 2006 01:22, Brecht Hoflack wrote:
> Clarence Dang wrote:
> > On Friday 05 May 2006 23:54, Brecht Hoflack wrote:
> >> i am using DOSEMU 1.3.3 with direct hardware graphics.  When i call
> >> dosemu with the dosemu -t command the direct graphics don't seem to
> >> work.
> >
> > dosemu -s
>
> I was actually using dosemu -s -t.  

Opposites.

> When trying to do this in a Xterm 
> the graphical part is not working (probably caused by the -t switch).

dosemu -t in an xterm cannot display graphics.  dosemu -s (for console 
graphics) does not work in X.

> So how can i run run Dosemu in X without starting XDosemu (and without
> using the -t switch).

If you want graphics in X, type "xdosemu" or "dosemu -X" to bring up a window.  
More recently, you can just type "dosemu".

> >> Also the Break is mapped as Control X C instead of the Control
> >> Break sequence.  Does somebody have an idea what may cause this error?
> >
> > Make sure $_rawkeyboard = (1).  I think dosemu -s covers that these days
> > though but you should check.
>
> It was already configured this way.  Control Break does not work using
> the -t switch however.

You simply don't want -t.

Re: dosemu -t problem

[Bart Oldeman]

On Tue, 9 May 2006, Clarence Dang wrote:

> On Tuesday 09 May 2006 01:22, Brecht Hoflack wrote:
>> Clarence Dang wrote:
>>> On Friday 05 May 2006 23:54, Brecht Hoflack wrote:
>>>> i am using DOSEMU 1.3.3 with direct hardware graphics.  When i call
>>>> dosemu with the dosemu -t command the direct graphics don't seem to
>>>> work.
>>>
>>> dosemu -s
>>
>> I was actually using dosemu -s -t.
>
> Opposites.

They are only partially opposites; -s -t may be useful if you want to run 
text-mode DOS with direct hardware access to, say, the native speaker and
parellel ports.

But of course, -t sets pure terminal mode so any graphics are gone.

>> When trying to do this in a Xterm
>> the graphical part is not working (probably caused by the -t switch).
>
> dosemu -t in an xterm cannot display graphics.  dosemu -s (for console
> graphics) does not work in X.

it works here...

>> So how can i run run Dosemu in X without starting XDosemu (and without
>> using the -t switch).
>
> If you want graphics in X, type "xdosemu" or "dosemu -X" to bring up a window.
> More recently, you can just type "dosemu".

indeed.

>> It was already configured this way.  Control Break does not work using
>> the -t switch however.
>
> You simply don't want -t.

indeed.

> dosemu -t is only for text in consoles.  Useful for xterm's with 
> scrollable history.

"dosemu -t" is useful in several situations, but scrollable history isn't 
one of them. If you want history, you need "dosemu -dumb", and that will 
only work with pure commandline DOS stuff (no TUIs).

But "dosemu -t" *is* useful in situations like:
* you are on the console and don't need graphics; it starts up a bit
   quicker than dosemu -s. Or you use the console and don't have root.
* you are using DOSEMU remotely on a slow connection or without an X
   server (e.g. Putty in plain Windows, real serial terminals, ...).
* you want to use a DOS TUI which works with more than 80x25 columns.
   (the Watcom Debugger is one example of those).

Bart

dosemu -t problem

[Brecht Hoflack]

Hello,

i am using DOSEMU 1.3.3 with direct hardware graphics.  When i call
dosemu with the dosemu -t command the direct graphics don't seem to
work.  Also the Break is mapped as Control X C instead of the Control
Break sequence.  Does somebody have an idea what may cause this error? 
I would like to use the -t switch to use the terminal version of Dosemu.

br,

Brecht

Re: dosemu -t problem

[Clarence Dang]

On Friday 05 May 2006 23:54, Brecht Hoflack wrote:
> i am using DOSEMU 1.3.3 with direct hardware graphics.  When i call
> dosemu with the dosemu -t command the direct graphics don't seem to
> work.  

dosemu -s

> Also the Break is mapped as Control X C instead of the Control 
> Break sequence.  Does somebody have an idea what may cause this error?

Make sure $_rawkeyboard = (1).  I think dosemu -s covers that these days 
though but you should check.

> I would like to use the -t switch to use the terminal version of Dosemu.

dosemu -t is only for text in consoles.  Useful for xterm's with scrollable 
history.