* [LARTC] Simple set up to shape traffic...
@ 2006-09-08 19:24 John Clark
0 siblings, 0 replies; only message in thread
From: John Clark @ 2006-09-08 19:24 UTC (permalink / raw)
To: lartc
I looked and found a 'very simple' command sequence to shape traffic to
a specific
host. However, I 'cribbed' the command sequence from a online tutoral
from 'somewhere'.
I now have lost the example, and my altered sequence.
the command I am getting an 'RTNETLINK' Invalid argument error from is:
tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 3700kbit
I don't think I used this particular set of options previously. Somehow
I think I
was using the sfq rather than the cbq.
The goal that I have at the moment is to limit the bandwidth of data
sent to a
particular host. I had this working but seem to have lost a specific
parameter sequence.
Thanks
John Clark
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-09-08 19:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-08 19:24 [LARTC] Simple set up to shape traffic John Clark
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.