From: Jeff Garzik <jeff@garzik.org>
To: Roland Dreier <rdreier@cisco.com>
Cc: Linus Torvalds <torvalds@osdl.org>,
David Miller <davem@davemloft.net>,
linux-kernel@vger.kernel.org, tiwai@suse.de
Subject: Re: [PATCH] ALSA: hda-intel - Disable MSI support by default
Date: Tue, 14 Nov 2006 23:56:02 -0500 [thread overview]
Message-ID: <455A9DE2.8080908@garzik.org> (raw)
In-Reply-To: <ada8xidz5zn.fsf@cisco.com>
Roland Dreier wrote:
> > That reminds me of a potential driver bug -- MSI-aware drivers need to
> > call pci_intx(pdev,0) to turn off the legacy PCI interrupt, before
> > enabling MSI interrupts.
>
> Huh? The device can't generate any legacy interrupts once MSI is
> enabled. As the PCI spec says:
>
> "While enabled for MSI or MSI-X operation, a function is prohibited
> from using its INTx# pin (if implemented) to request service (MSI,
> MSI-X, and INTx# are mutually exclusive)."
>
> Although the MSI core does do pci_intx() for PCIe devices only, for
> some reason I can't grok.
Probably the same reason I just mentioned in a reply to DaveM. Wildly
speculating, some chips may depend on software to disable INTX -- i.e.
depend on software to provide this aspect of PCI spec compliance.
> > The only thing that has changed recently is that people are trying to
> > get it working on AMD/NV as well. (Brice Goglin's stuff starting at
> > 6397c75cbc4d7dbc3d07278b57c82a47dafb21b5 in 'git log')
>
> Actually NVidia/AMD was working on some systems long before that -- I
> had it working at least 2 years ago.
Well, just noting that AMD/NV seems to be a common pattern in the
referenced bug reports, and the set of Linux platforms which claim to
support MSI had recent churn.
Jeff
next prev parent reply other threads:[~2006-11-15 4:56 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200611150059.kAF0xBTl009796@hera.kernel.org>
2006-11-15 1:34 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Jeff Garzik
2006-11-15 1:55 ` Linus Torvalds
2006-11-15 2:40 ` Jeff Garzik
2006-11-15 2:49 ` Linus Torvalds
2006-11-15 3:00 ` David Miller
2006-11-15 3:10 ` Linus Torvalds
2006-11-15 3:21 ` David Miller
2006-11-15 3:54 ` Linus Torvalds
2006-11-15 4:11 ` Jeff Garzik
2006-11-15 4:15 ` David Miller
2006-11-15 4:24 ` Jeff Garzik
2006-11-15 4:28 ` David Miller
2006-11-16 2:25 ` Benjamin Herrenschmidt
2006-11-16 2:28 ` Benjamin Herrenschmidt
2006-11-16 3:25 ` Jeff Garzik
2006-11-16 4:12 ` Benjamin Herrenschmidt
2006-11-16 6:13 ` Jeff Garzik
2006-11-16 14:41 ` Krzysztof Halasa
2006-11-16 15:27 ` Jeff Garzik
2006-11-16 17:24 ` Roland Dreier
2006-11-15 19:09 ` Stephen Hemminger
2006-11-15 19:23 ` Jeff Garzik
2006-11-15 19:49 ` Stephen Hemminger
2006-11-15 22:31 ` Roland Dreier
2006-11-16 2:24 ` Benjamin Herrenschmidt
2006-11-15 4:30 ` Roland Dreier
2006-11-15 4:56 ` Jeff Garzik [this message]
2006-11-15 15:53 ` Linus Torvalds
2006-11-15 18:30 ` Jeff Garzik
2006-11-15 18:45 ` Roland Dreier
2006-11-16 2:29 ` Benjamin Herrenschmidt
2006-11-15 13:34 ` Krzysztof Halasa
2006-11-15 18:42 ` Jeff Garzik
2006-11-15 19:04 ` Linus Torvalds
2006-11-15 19:20 ` Jeff Garzik
2006-11-15 19:35 ` Linus Torvalds
2006-11-15 19:59 ` Mws
2006-11-15 20:14 ` Linus Torvalds
2006-11-15 20:53 ` Olivier Nicolas
2006-11-16 6:08 ` Yinghai Lu
2006-11-16 23:25 ` Olivier Nicolas
2006-11-15 21:10 ` Mws
2006-11-16 11:10 ` Mws
2006-11-15 4:14 ` Roland Dreier
2006-11-15 4:49 ` Andi Kleen
2006-11-15 4:57 ` Roland Dreier
2006-11-15 5:11 ` Andi Kleen
2006-11-15 22:43 ` Roland Dreier
2006-11-15 18:35 ` [PATCH] ACPI: use MSI_NOT_SUPPORTED bit Randy Dunlap
2006-11-15 18:44 ` Andi Kleen
2006-11-15 19:41 ` [PATCH v2] " Randy Dunlap
2006-11-15 19:58 ` [PATCH v3] " Randy Dunlap
2006-11-15 20:19 ` [PATCH] " Len Brown
2006-11-16 2:22 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Benjamin Herrenschmidt
2006-11-15 10:31 ` Takashi Iwai
2006-11-15 16:19 ` Linus Torvalds
2006-11-15 16:24 ` Arjan van de Ven
2006-11-15 16:36 ` Linus Torvalds
2006-11-15 18:40 ` Jeff Garzik
2006-11-15 18:51 ` Linus Torvalds
2006-11-15 19:01 ` Arjan van de Ven
2006-11-15 19:34 ` Stephen Clark
2006-11-15 19:48 ` Jeff Garzik
2006-11-15 20:01 ` Stephen Clark
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:58 ` Takashi Iwai
2006-11-15 19:15 ` Jeff Garzik
2006-11-16 10:44 ` Takashi Iwai
2006-11-16 23:01 ` Olivier Nicolas
2006-11-17 10:55 ` Takashi Iwai
2006-11-17 16:17 ` Yinghai Lu
2006-11-17 16:35 ` Linus Torvalds
2006-11-15 19:20 ` Stephen Hemminger
2006-11-15 22:35 ` Roland Dreier
2006-11-15 4:01 ` Benjamin Herrenschmidt
2006-11-15 4:07 ` David Miller
2006-11-15 7:23 ` Benjamin Herrenschmidt
2006-11-15 10:06 ` Segher Boessenkool
2006-11-15 4:23 ` Roland Dreier
2006-11-15 7:24 ` Benjamin Herrenschmidt
2006-11-15 4:04 ` Benjamin Herrenschmidt
2006-11-15 4:14 ` Jeff Garzik
2006-11-15 4:24 ` Roland Dreier
2006-11-15 2:58 ` Randy Dunlap
2006-11-15 3:10 ` D. Hazelton
2006-11-15 3:30 ` Jeff Garzik
2006-11-15 3:53 ` D. Hazelton
2006-11-15 11:40 ` Alan
2006-11-16 4:06 ` D. Hazelton
2006-11-16 0:17 Lu, Yinghai
-- strict thread matches above, loose matches on Subject: below --
2006-11-16 3:50 Lu, Yinghai
2006-11-16 23:36 ` Olivier Nicolas
2006-11-16 4:24 linux
2006-11-16 10:53 ` Alan
2006-11-16 16:05 ` Linus Torvalds
2006-11-16 4:25 Lu, Yinghai
2006-11-16 18:00 ` D. Hazelton
2006-11-16 23:54 Lu, Yinghai
2006-11-17 0:49 ` Olivier Nicolas
2006-11-17 17:42 Lu, Yinghai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=455A9DE2.8080908@garzik.org \
--to=jeff@garzik.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=rdreier@cisco.com \
--cc=tiwai@suse.de \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.