From: Jeff Garzik <jeff@garzik.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>,
torvalds@osdl.org, linux-kernel@vger.kernel.org, tiwai@suse.de
Subject: Re: [PATCH] ALSA: hda-intel - Disable MSI support by default
Date: Wed, 15 Nov 2006 22:25:17 -0500 [thread overview]
Message-ID: <455BDA1D.5090409@garzik.org> (raw)
In-Reply-To: <1163643937.5940.342.camel@localhost.localdomain>
Benjamin Herrenschmidt wrote:
> On Tue, 2006-11-14 at 20:28 -0800, David Miller wrote:
>> From: Jeff Garzik <jeff@garzik.org>
>> Date: Tue, 14 Nov 2006 23:24:04 -0500
>>
>>> I can't answer for the spec, but at least two independent device vendors
>>> recommended to write an MSI driver that way (disable intx, enable msi).
>> Ok.
>>
>>> Completely independent of MSI though, a PCI 2.2 compliant driver should
>>> be nice and disable intx on exit, just to avoid any potential interrupt
>>> hassles after driver unload. And of course be aware that it might need
>>> to enable intx upon entry.
>> This also sounds like it should occur in the generic PCI layer when a
>> PCI driver is unregistered.
>
> Is this disable_intx() thingy something x86 specific ? I mean, you can't
> just call disable_irq() for LSIs since you can be sharing it. If you
> aren't sharing, free_irq() will mask for you.
We are referring to the standard PCI 2.2 bit, PCI_COMMAND_INTX_DISABLE.
Jeff
next prev parent reply other threads:[~2006-11-16 3:25 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200611150059.kAF0xBTl009796@hera.kernel.org>
2006-11-15 1:34 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Jeff Garzik
2006-11-15 1:55 ` Linus Torvalds
2006-11-15 2:40 ` Jeff Garzik
2006-11-15 2:49 ` Linus Torvalds
2006-11-15 3:00 ` David Miller
2006-11-15 3:10 ` Linus Torvalds
2006-11-15 3:21 ` David Miller
2006-11-15 3:54 ` Linus Torvalds
2006-11-15 4:11 ` Jeff Garzik
2006-11-15 4:15 ` David Miller
2006-11-15 4:24 ` Jeff Garzik
2006-11-15 4:28 ` David Miller
2006-11-16 2:25 ` Benjamin Herrenschmidt
2006-11-16 2:28 ` Benjamin Herrenschmidt
2006-11-16 3:25 ` Jeff Garzik [this message]
2006-11-16 4:12 ` Benjamin Herrenschmidt
2006-11-16 6:13 ` Jeff Garzik
2006-11-16 14:41 ` Krzysztof Halasa
2006-11-16 15:27 ` Jeff Garzik
2006-11-16 17:24 ` Roland Dreier
2006-11-15 19:09 ` Stephen Hemminger
2006-11-15 19:23 ` Jeff Garzik
2006-11-15 19:49 ` Stephen Hemminger
2006-11-15 22:31 ` Roland Dreier
2006-11-16 2:24 ` Benjamin Herrenschmidt
2006-11-15 4:30 ` Roland Dreier
2006-11-15 4:56 ` Jeff Garzik
2006-11-15 15:53 ` Linus Torvalds
2006-11-15 18:30 ` Jeff Garzik
2006-11-15 18:45 ` Roland Dreier
2006-11-16 2:29 ` Benjamin Herrenschmidt
2006-11-15 13:34 ` Krzysztof Halasa
2006-11-15 18:42 ` Jeff Garzik
2006-11-15 19:04 ` Linus Torvalds
2006-11-15 19:20 ` Jeff Garzik
2006-11-15 19:35 ` Linus Torvalds
2006-11-15 19:59 ` Mws
2006-11-15 20:14 ` Linus Torvalds
2006-11-15 20:53 ` Olivier Nicolas
2006-11-16 6:08 ` Yinghai Lu
2006-11-16 23:25 ` Olivier Nicolas
2006-11-15 21:10 ` Mws
2006-11-16 11:10 ` Mws
2006-11-15 4:14 ` Roland Dreier
2006-11-15 4:49 ` Andi Kleen
2006-11-15 4:57 ` Roland Dreier
2006-11-15 5:11 ` Andi Kleen
2006-11-15 22:43 ` Roland Dreier
2006-11-15 18:35 ` [PATCH] ACPI: use MSI_NOT_SUPPORTED bit Randy Dunlap
2006-11-15 18:44 ` Andi Kleen
2006-11-15 19:41 ` [PATCH v2] " Randy Dunlap
2006-11-15 19:58 ` [PATCH v3] " Randy Dunlap
2006-11-15 20:19 ` [PATCH] " Len Brown
2006-11-16 2:22 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Benjamin Herrenschmidt
2006-11-15 10:31 ` Takashi Iwai
2006-11-15 16:19 ` Linus Torvalds
2006-11-15 16:24 ` Arjan van de Ven
2006-11-15 16:36 ` Linus Torvalds
2006-11-15 18:40 ` Jeff Garzik
2006-11-15 18:51 ` Linus Torvalds
2006-11-15 19:01 ` Arjan van de Ven
2006-11-15 19:34 ` Stephen Clark
2006-11-15 19:48 ` Jeff Garzik
2006-11-15 20:01 ` Stephen Clark
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:58 ` Takashi Iwai
2006-11-15 19:15 ` Jeff Garzik
2006-11-16 10:44 ` Takashi Iwai
2006-11-16 23:01 ` Olivier Nicolas
2006-11-17 10:55 ` Takashi Iwai
2006-11-17 16:17 ` Yinghai Lu
2006-11-17 16:35 ` Linus Torvalds
2006-11-15 19:20 ` Stephen Hemminger
2006-11-15 22:35 ` Roland Dreier
2006-11-15 4:01 ` Benjamin Herrenschmidt
2006-11-15 4:07 ` David Miller
2006-11-15 7:23 ` Benjamin Herrenschmidt
2006-11-15 10:06 ` Segher Boessenkool
2006-11-15 4:23 ` Roland Dreier
2006-11-15 7:24 ` Benjamin Herrenschmidt
2006-11-15 4:04 ` Benjamin Herrenschmidt
2006-11-15 4:14 ` Jeff Garzik
2006-11-15 4:24 ` Roland Dreier
2006-11-15 2:58 ` Randy Dunlap
2006-11-15 3:10 ` D. Hazelton
2006-11-15 3:30 ` Jeff Garzik
2006-11-15 3:53 ` D. Hazelton
2006-11-15 11:40 ` Alan
2006-11-16 4:06 ` D. Hazelton
2006-11-16 0:17 Lu, Yinghai
-- strict thread matches above, loose matches on Subject: below --
2006-11-16 3:50 Lu, Yinghai
2006-11-16 23:36 ` Olivier Nicolas
2006-11-16 4:24 linux
2006-11-16 10:53 ` Alan
2006-11-16 16:05 ` Linus Torvalds
2006-11-16 4:25 Lu, Yinghai
2006-11-16 18:00 ` D. Hazelton
2006-11-16 23:54 Lu, Yinghai
2006-11-17 0:49 ` Olivier Nicolas
2006-11-17 17:42 Lu, Yinghai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=455BDA1D.5090409@garzik.org \
--to=jeff@garzik.org \
--cc=benh@kernel.crashing.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.