From: Tilman Schmidt <tilman@imap.cc>
To: Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org,
linux-fbdev-devel@lists.sourceforge.net
Subject: i810fb fails to load (was: 2.6.20-rc4-mm1)
Date: Mon, 15 Jan 2007 00:52:36 +0100 [thread overview]
Message-ID: <45AAC244.8060607@imap.cc> (raw)
In-Reply-To: <20070111222627.66bb75ab.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 2502 bytes --]
With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my
Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs
of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working):
@@ -4,7 +4,7 @@
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
-<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007
+<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007
<6>BIOS-provided physical RAM map:
<4>sanitize start
<4>sanitize end
@@ -188,7 +192,6 @@
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
-<7>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
<7>Boot video device is 0000:00:01.0
<4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
@@ -238,20 +241,15 @@
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Intel 82802 RNG detected
-<6>Linux agpgart interface v0.101 (c) Dave Jones
+<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>agpgart: Detected an Intel i810 E Chipset.
<6>agpgart: detected 4MB dedicated video ram.
<6>agpgart: AGP aperture is 64M @ 0xf8000000
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
<7>PCI: setting IRQ 9 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
-<4>i810-i2c: Probe DDC1 Bus
-<4>i810fb_init_pci: DDC probe successful
-<4>Console: switching to colour frame buffer device 160x64
-<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0
-<4>I810FB: Video RAM : 4096K
-<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz
-<4>I810FB: Mode : 1280x1024-8bpp@60Hz
+<4>i810fb_alloc_fbmem: can't bind framebuffer memory
+<4>i810fb: probe of 0000:00:01.0 failed with error -16
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Please let me know if you need more information.
Thanks
Tilman
--
Tilman Schmidt E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]
next prev parent reply other threads:[~2007-01-14 23:52 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-12 6:26 2.6.20-rc4-mm1 Andrew Morton
2007-01-12 10:20 ` Early ACPI lockup (was Re: 2.6.20-rc4-mm1) Frederik Deweerdt
2007-01-12 22:53 ` Len Brown
2007-01-12 23:10 ` Frederik Deweerdt
2007-01-12 23:36 ` Jiri Slaby
2007-01-13 0:08 ` Michal Piotrowski
2007-01-13 0:45 ` Frederik Deweerdt
2007-01-13 0:43 ` Jiri Slaby
2007-01-12 10:25 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 13:18 ` 2.6.20-rc4-mm1 Frederik Deweerdt
2007-01-12 15:13 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 15:16 ` 2.6.20-rc4-mm1 Michal Piotrowski
2007-01-12 16:12 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 10:52 ` 'struct task_struct' has no member named 'mems_allowed' (was: Re: 2.6.20-rc4-mm1) Sander
2007-01-12 11:28 ` Paul Jackson
2007-01-12 19:25 ` Christoph Lameter
2007-01-12 21:20 ` Paul Jackson
2007-01-12 21:28 ` Christoph Lameter
2007-01-12 21:58 ` Paul Jackson
2007-01-12 22:00 ` Christoph Lameter
2007-01-12 22:10 ` Paul Jackson
2007-01-12 22:11 ` Andrew Morton
2007-01-12 11:55 ` spurious sparse warnings from linux/aio.h (was: 2.6.20-rc4-mm1) Tilman Schmidt
2007-01-12 13:11 ` Suparna Bhattacharya
2007-01-12 17:46 ` spurious sparse warnings from linux/aio.h Tilman Schmidt
2007-01-12 13:33 ` [-mm patch] remove tcp header from tcp_v4_check Frederik Deweerdt
2007-01-12 13:55 ` [-mm patch] remove tcp header from tcp_v4_check (take #2) Frederik Deweerdt
2007-02-05 0:44 ` David Miller
2007-01-13 7:27 ` 2.6.20-rc4-mm1: status of sn9c102_pas202bca? Adrian Bunk
2007-01-15 11:34 ` Mauro Carvalho Chehab
2007-01-13 9:56 ` [-mm patch] make mmc_sysfs.c:mmc_key_type static Adrian Bunk
2007-01-13 22:38 ` Pierre Ossman
2007-01-13 9:56 ` [Cluster-devel] [-mm patch] make gfs2_change_nlink_i() static Adrian Bunk
2007-01-13 9:56 ` Adrian Bunk
2007-01-15 10:31 ` [Cluster-devel] " Steven Whitehouse
2007-01-15 10:31 ` Steven Whitehouse
2007-01-16 21:04 ` [Cluster-devel] " Wendy Cheng
2007-01-16 21:04 ` Wendy Cheng
2007-01-16 21:29 ` Adrian Bunk
2007-01-16 21:29 ` Adrian Bunk
2007-01-14 9:10 ` 2.6.20-rc4-mm1: different values for OHCI_QUIRK_ZFMICRO Adrian Bunk
2007-01-14 14:36 ` David Brownell
2007-02-20 0:06 ` Adrian Bunk
2007-03-29 22:06 ` Randy Dunlap
2007-03-29 22:24 ` David Brownell
2007-05-08 22:17 ` [PATCH] " Randy Dunlap
2007-05-08 22:34 ` David Brownell
2007-05-08 22:37 ` Greg KH
2007-03-30 15:18 ` 2.6.20-rc4-mm1: " Tony Olech
2007-01-14 9:48 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 10:46 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 14:40 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:05 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:31 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:30 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-15 8:22 ` 2.6.20-rc4-mm1 Ingo Molnar
2007-01-15 23:55 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:20 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 23:52 ` Tilman Schmidt [this message]
2007-01-15 0:22 ` i810fb fails to load (was: 2.6.20-rc4-mm1) Andrew Morton
2007-01-15 0:22 ` Andrew Morton
2007-01-22 13:42 ` i810fb fails to load Thomas Hellström
2007-01-22 18:30 ` Tilman Schmidt
2007-01-22 21:50 ` Dave Airlie
2007-01-23 8:10 ` Thomas Hellström
2007-01-23 8:10 ` Thomas Hellström
2007-01-18 21:55 ` [-mm patch] fs/unionfs/: possible cleanups Adrian Bunk
2007-01-20 22:06 ` Josef Sipek
2007-01-19 18:40 ` [-mm patch] drivers/mtd/ubi/: " Adrian Bunk
2007-01-19 18:40 ` Adrian Bunk
2007-01-21 11:23 ` Artem Bityutskiy
2007-01-20 22:38 ` [-mm patch] oops in drivers/net/shaper.c Frederik Deweerdt
2007-01-21 19:13 ` [-mm patch] remove one remaining "#define BCM_TSO 1" Adrian Bunk
2007-01-22 18:17 ` [-mm patch] drivers/firewire/: cleanups Adrian Bunk
2007-01-22 19:41 ` Kristian Høgsberg
2007-01-22 20:04 ` Adrian Bunk
2007-01-22 20:04 ` Kristian Høgsberg
2007-01-22 20:44 ` Stefan Richter
2007-01-23 6:02 ` `make htmldocs` fails Don Mullis
2007-01-23 6:22 ` Randy Dunlap
2007-01-23 6:45 ` `make htmldocs` fails -- 2.6.20-rc4-mm1 Don Mullis
2007-01-23 6:35 ` `make htmldocs` fails Greg KH
2007-01-24 13:53 ` 2.6.20-rc4-mm1: PCI=n: drivers/net/3c59x.c compile error Adrian Bunk
2007-01-24 14:12 ` Sergei Shtylyov
2007-02-17 19:26 ` Sergei Shtylyov
2007-02-17 19:32 ` Sergei Shtylyov
2007-02-26 13:22 ` Sergei Shtylyov
2007-02-26 17:26 ` Randy Dunlap
2007-02-26 21:14 ` Greg KH
2007-03-06 16:15 ` Sergei Shtylyov
2007-03-06 16:47 ` Randy Dunlap
2007-03-09 12:54 ` Tejun Heo
2007-01-24 22:36 ` [-mm patch] MTD_CK804XROM must depend on PCI Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45AAC244.8060607@imap.cc \
--to=tilman@imap.cc \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.