[uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Blaisorblade]

I've found now the time to run a test, and I found that while on Ubuntu, until 
now, I couldn't compile a 64bit UML (I thought of some regression I didn't 
have the time to debug), compiling the same code with gcc 3.4 gets a fully 
working UML.

The used UML is release 2.6.18.6.

Ubuntu's gcc is:

$ gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured 
with: ../src/configure -v --enable-languages=c,c++,java,f95,objc,ada,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.0 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-java-awt=gtk-default --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-4.0-1.4.2.0/jre --enable-mpfr --disable-werror --enable-checking=release 
x86_64-linux-gnu
Thread model: posix
gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)


Without any errors, after these messages:

kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.

it hangs giving the following result at strace -p (I've printed two 
consecutive iterations of the same messages to show that they are the same):

--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL) = 
31586
ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL) = 
31586
ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0

--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL) = 
31586
ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL) = 
31586
ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0

I'll have to verify whether some code in the stubs is miscompiled. But not 
until... well, I dunno when I'll be back...

Anybody else with the same problem?
-- 
Inform me of my mistakes, so I can add them to my list!
Paolo Giarrusso, aka Blaisorblade
http://www.user-mode-linux.org/~blaisorblade
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Antoine Martin]

>> ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
>> ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
>> ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
>>
>> I'll have to verify whether some code in the stubs is miscompiled. But not 
>> until... well, I dunno when I'll be back...
>>
>> Anybody else with the same problem?
> 
> 
> Isn't this is the same problem we discussed a few months back?  What 
> I've discovered since then is this is a regression introduced after 
> 2.6.16 on the _host_.  Any post-2.6.16 host kernel, either skas v8.2 or 
> v9.pre causes Ubuntu (and other distros, I believe) to hang after "VFS 
> mounting root".
> 
> http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116008558424368&w=2
> http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116711159414443&w=2
Indeed it is.

A fix would be more than welcome. (2.6.16 is a bit dated)
I believe a lot of users are hitting this bug now too (and it is a 
regression) as a lot of distros ship recent kernels.

Another regression in 2.6.16 (or later?) is the inability to run 32-bit 
guests on 64-bit hosts (the same binaries that used to work before - 
statically compiled). The boot stops very early during the "checking 
ptrace" step.

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Christopher S. Aker]

Blaisorblade wrote:
[snip]
> Without any errors, after these messages:
> 
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> 
> it hangs giving the following result at strace -p (I've printed two 
> consecutive iterations of the same messages to show that they are the same):
> 
> --- SIGCHLD (Child exited) @ 0 (0) ---
> wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL) = 
> 31586
> ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
> ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
> ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
> --- SIGCHLD (Child exited) @ 0 (0) ---
> wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL) = 
> 31586
> ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
> ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
> ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
> 
> --- SIGCHLD (Child exited) @ 0 (0) ---
> wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL) = 
> 31586
> ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
> ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
> ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
> --- SIGCHLD (Child exited) @ 0 (0) ---
> wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL) = 
> 31586
> ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
> ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
> ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
> 
> I'll have to verify whether some code in the stubs is miscompiled. But not 
> until... well, I dunno when I'll be back...
> 
> Anybody else with the same problem?


Isn't this is the same problem we discussed a few months back?  What 
I've discovered since then is this is a regression introduced after 
2.6.16 on the _host_.  Any post-2.6.16 host kernel, either skas v8.2 or 
v9.pre causes Ubuntu (and other distros, I believe) to hang after "VFS 
mounting root".

http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116008558424368&w=2
http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116711159414443&w=2

-Chris


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Antoine Martin]

Don't know if that helps, but here it is: (sysrq t on 2.6.20-rc5):

[42949400.260000] SysRq : Show State
[42949400.260000]
[42949400.260000]                          free 
sibling
[42949400.260000]   task             PC    stack   pid father child 
younger older
[42949400.260000] ksoftirqd/0   S B7FE2400     0     2      1 
   3       (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08bcb280 080900ee 08bd3e94 
0805cc37 08bcb784
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08bd0000 
08bd3ec8 08059dba 08bcb280
[42949400.260000]        08bcb880 08bd0000 08bd0000 08bd0000 08bcb280 
00000000 08bd3ecc 08bd0000 Call Trace:
[42949400.260000] 08bd3e78:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08bd3e98:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08bd3ecc:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08bd3f3c:  [<08090141>] ksoftirqd+0x53/0xb5
[42949400.260000] 08bd3f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08bd3f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08bd3fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08bd3ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] watchdog/0    S B7FE2400     0     3      1 
   4     2 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08bcac80 080ab1d9 08bd7e9c 
0805cc37 08bcb184
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08bd4000 
08bd7ed0 08059dba 08bcac80
[42949400.260000]        08bcb880 08bd4000 08bd4000 08bd4000 08bcac80 
00000000 08bd7ed4 08bd4000 Call Trace:
[42949400.260000] 08bd7e80:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08bd7ea0:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08bd7ed4:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08bd7f44:  [<080ab235>] watchdog+0x5c/0x6b
[42949400.260000] 08bd7f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08bd7f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08bd7fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08bd7ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] events/0      S B7FE2400     0     4      1 
   5     3 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08bca680 08bdbf40 08bdbe38 
0805cc37 08bcab84
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08bd8000 
08bdbe6c 08059dba 08bca680
[42949400.260000]        08bcb880 0807cf44 083dd690 00000000 08bca680 
08bdbf20 08bdbe70 08bd8000 Call Trace:
[42949400.260000] 08bdbe1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08bdbe3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08bdbe70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08bdbee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08bdbf5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08bdbf90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08bdbfcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08bdbffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] khelper       S B7FE2400     0     5      1 
   6     4 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08bca080 08bdff40 08bdfe38 
0805cc37 08bca584
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08bdc000 
08bdfe6c 08059dba 08bca080
[42949400.260000]        08bcb880 08bdfe70 080880ca 08bcfc64 08bca080 
08bdff20 08bdfe70 08bdc000 Call Trace:
[42949400.260000] 08bdfe1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08bdfe3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08bdfe70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08bdfee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08bdff5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08bdff90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08bdffcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08bdfffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] kthread       S B7FE2400     0     6      1    42 
         5 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08be1900 08be7f40 08be7e38 
0805cc37 08be1e04
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08be4000 
08be7e6c 08059dba 08be1900
[42949400.260000]        08bcb880 080880ca 08bcfbe8 00000003 08be1900 
08be7f20 08be7e70 08be4000 Call Trace:
[42949400.260000] 08be7e1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08be7e3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08be7e70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08be7ee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08be7f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08be7f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08be7fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08be7ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] kblockd/0     S B7FE2400     0    42      6 
  43       (L-TLB)
[42949400.260000] 00000001 00000000 08be1900 08bbd380 00000000 08a63e38 
0805cc37 08bbd884
[42949400.260000]        08be1e04 08059d68 08be1900 08be1900 08a60000 
08a63e6c 08059dba 08bbd380
[42949400.260000]        08be1900 5a5a5a5a 5a5a5a5a 5a5a5a5a 08be1900 
08a63e6c 080877e0 08a60000 Call Trace:
[42949400.260000] 08a63e1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a63e3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a63e70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a63ee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08a63f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a63f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a63fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a63ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] cqueue/0      S B7FE2400     0    43      6 
  55    42 (L-TLB)
[42949400.260000] 00000001 00000000 08bca080 08bbcd80 00000000 08a67e38 
0805cc37 08bbd284
[42949400.260000]        08bca584 08059d68 08bca080 08bca080 08a64000 
08a67e6c 08059dba 08bbcd80
[42949400.260000]        08bca080 5a5a5a5a 5a5a5a5a 5a5a5a5a 08bca080 
08a67e6c 080877e0 08a64000 Call Trace:
[42949400.260000] 08a67e1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a67e3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a67e70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a67ee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08a67f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a67f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a67fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a67ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] pdflush       S B7FE2400     0    55      6 
  56    43 (L-TLB)
[42949400.260000] 00000001 00000000 08a5f280 08a5ec80 080b1dc7 08a7be5c 
0805cc37 08a5f184
[42949400.260000]        08a5f784 08059d68 08a5f280 08a5f280 08a78000 
08a7be90 08059dba 08a5ec80
[42949400.260000]        08a5f280 5a5a5a5a 0807cf25 083aed14 08a5ec80 
08a7bf38 08a7be94 08a78000 Call Trace:
[42949400.260000] 08a7be40:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a7be60:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a7be94:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a7bf04:  [<080b1d0c>] __pdflush+0x94/0x14f
[42949400.260000] 08a7bf20:  [<080b1e0d>] pdflush+0x46/0x48
[42949400.260000] 08a7bf5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a7bf90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a7bfcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a7bffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] pdflush       S B7FE2400     0    56      6 
  57    55 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 08a5f280 080b1dc7 08a77e5c 
0805cc37 08a5f784
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 08a74000 
08a77e90 08059dba 08a5f280
[42949400.260000]        08bcb880 0807ce7c 083aed14 00000000 08a5f280 
08a77f38 08a77e94 08a74000 Call Trace:
[42949400.260000] 08a77e40:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a77e60:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a77e94:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a77f04:  [<080b1d0c>] __pdflush+0x94/0x14f
[42949400.260000] 08a77f20:  [<080b1e0d>] pdflush+0x46/0x48
[42949400.260000] 08a77f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a77f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a77fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a77ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] kswapd0       S B7FE2400     0    57      6 
  58    56 (L-TLB)
[42949400.260000] 00000001 00000000 08bbc180 08a5f880 00000001 08a73e44 
0805cc37 08a5fd84
[42949400.260000]        08bbc684 08059d68 08bbc180 08bbc180 08a70000 
08a73e78 08059dba 08a5f880
[42949400.260000]        08bbc180 5a5a5a5a 5a5a5a5a 5a5a5a5a 08a5f880 
00000000 08a73e7c 08a70000 Call Trace:
[42949400.260000] 08a73e28:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a73e48:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a73e7c:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a73eec:  [<080b45cc>] kswapd+0xd4/0xf3
[42949400.260000] 08a73f5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a73f90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a73fcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a73ffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] aio/0         S B7FE2400     0    58      6 
692    57 (L-TLB)
[42949400.260000] 00000001 00000000 08bca080 08bbc180 00000000 08a6fe38 
0805cc37 08bbc684
[42949400.260000]        08bca584 08059d68 08bca080 08bca080 08a6c000 
08a6fe6c 08059dba 08bbc180
[42949400.260000]        08bca080 5a5a5a5a 5a5a5a5a 5a5a5a5a 08bca080 
08a6fe6c 080877e0 08a6c000 Call Trace:
[42949400.260000] 08a6fe1c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 08a6fe3c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 08a6fe70:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 08a6fee0:  [<0809ad99>] worker_thread+0xfa/0x162
[42949400.260000] 08a6ff5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 08a6ff90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 08a6ffcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 08a6fffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]
[42949400.260000] kjournald     S B7FE2400     0   692      6 
        58 (L-TLB)
[42949400.260000] 00000001 00000000 08bcb880 089de100 08ae13cc 088abe48 
0805cc37 089de604
[42949400.260000]        08bcbd84 08059d68 08bcb880 08bcb880 088a8000 
088abe7c 08059dba 089de100
[42949400.260000]        08bcb880 0807cf44 088abe99 00000015 089de100 
00000001 088abe80 088a8000 Call Trace:
[42949400.260000] 088abe2c:  [<0805cc37>] switch_to_skas+0x3b/0x85
[42949400.260000] 088abe4c:  [<08059dba>] _switch_to+0x39/0xbe
[42949400.260000] 088abe80:  [<082babd6>] schedule+0x44c/0x4c3
[42949400.260000] 088abef0:  [<081370c8>] kjournald+0x14b/0x1b0
[42949400.260000] 088abf5c:  [<0809d77e>] kthread+0x8f/0xb8
[42949400.260000] 088abf90:  [<0807c421>] run_kernel_thread+0x45/0x50
[42949400.260000] 088abfcc:  [<0805cd0d>] new_thread_handler+0x8c/0xb9
[42949400.260000] 088abffc:  [<a55a5a5a>] 0xa55a5a5a
[42949400.260000]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Jeff Dike]

On Wed, Jan 17, 2007 at 05:15:35PM +0100, Blaisorblade wrote:
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> 
> it hangs giving the following result at strace -p (I've printed two 
> consecutive iterations of the same messages to show that they are the same):

I'm chasing something on i386 with the same symptoms, but I think it's
a different problem.  What I'm seeing is init segfaulting on some
hosts, but not others.

Figure out what the segfault is, and where it's happening.

				Jeff

-- 
Work email - jdike at linux dot intel dot com

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

[uml-devel] buggy UML AMD64?

[Antoine Martin]

Is anyone else having stability problems on AMD64? Or am I the only one 
using it?
Not only is x86 UML broken on AMD64, I am also getting (seemingly) 
random crashes running 64-bit UML.
The Gentoo guests in particular randomly fail to compile code - failing 
in completely random places. When you try again, it might work or just 
fail later when you run the binary...
These used to work reliably before so I am not just doing it wrong (as 
is often the case ;)
To summarize, that leaves us with:
* x86 unable to run kernels 2.6 due to a bug in host >2.6.16
(and most x86 guests require 2.6 to use latest glibc)
* amd64 unable to run x86 guests
* amd64 unable to run amd64 guests reliably
...

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Daniel Gryniewicz]

[-- Attachment #1.1: Type: text/plain, Size: 1153 bytes --]

On Fri, 2007-01-19 at 11:00 +0000, Antoine Martin wrote:
> Is anyone else having stability problems on AMD64? Or am I the only one 
> using it?
> Not only is x86 UML broken on AMD64, I am also getting (seemingly) 
> random crashes running 64-bit UML.
> The Gentoo guests in particular randomly fail to compile code - failing 
> in completely random places. When you try again, it might work or just 
> fail later when you run the binary...
> These used to work reliably before so I am not just doing it wrong (as 
> is often the case ;)
> To summarize, that leaves us with:
> * x86 unable to run kernels 2.6 due to a bug in host >2.6.16
> (and most x86 guests require 2.6 to use latest glibc)
> * amd64 unable to run x86 guests
> * amd64 unable to run amd64 guests reliably
> ...
> 

I'm the gentoo usermode-sources maintainer, and I run UML almost
exclusively on amd64.  I have, at any given time, from 4 to 20 UMLs
running on my main dev box, most of them 32-bit, and I haven't had any
stability problems.

Is your RAM OK?  Which kernels do you have inside and outside?  How are
you trying to build the 32-bit UMLs?

Daniel

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 194 bytes --]

_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

Daniel Gryniewicz wrote:
> On Fri, 2007-01-19 at 11:00 +0000, Antoine Martin wrote:
>> Is anyone else having stability problems on AMD64? Or am I the only one 
>> using it?
>> Not only is x86 UML broken on AMD64, I am also getting (seemingly) 
>> random crashes running 64-bit UML.
>> The Gentoo guests in particular randomly fail to compile code - failing 
>> in completely random places. When you try again, it might work or just 
>> fail later when you run the binary...
>> These used to work reliably before so I am not just doing it wrong (as 
>> is often the case ;)
>> To summarize, that leaves us with:
>> * x86 unable to run kernels 2.6 due to a bug in host >2.6.16
>> (and most x86 guests require 2.6 to use latest glibc)
>> * amd64 unable to run x86 guests
>> * amd64 unable to run amd64 guests reliably
>> ...
>>
> 
> I'm the gentoo usermode-sources maintainer, and I run UML almost
> exclusively on amd64.  I have, at any given time, from 4 to 20 UMLs
> running on my main dev box, most of them 32-bit, and I haven't had any
> stability problems.
Can you send me more details of your setup as I am quite experienced 
with UML and now completely stuck with AMD64.

> Is your RAM OK?
Oh yes, this has nothing to do with the hardware.

> Which kernels do you have inside and outside?
Host (outside):
2.6.19.2-skas3-v8.2

Inside: pick any of those (none of them work with >=2.6.16):
http://uml.nagafix.co.uk/

>  How are
> you trying to build the 32-bit UMLs?
These are the same as on the site above (which I maintain) and these 
have worked flawlessly for a long long time.

I have downgraded the x86 boxes to 2.6.15.7 and these are up and running 
again. But I can't do that for all of them, and this is just not an 
option for some of the amd64 boxes.

Thanks
Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Daniel Gryniewicz]

[-- Attachment #1.1: Type: text/plain, Size: 2244 bytes --]

On Fri, 2007-01-19 at 16:14 +0000, Antoine Martin wrote:
> Daniel Gryniewicz wrote:
> > I'm the gentoo usermode-sources maintainer, and I run UML almost
> > exclusively on amd64.  I have, at any given time, from 4 to 20 UMLs
> > running on my main dev box, most of them 32-bit, and I haven't had any
> > stability problems.
> Can you send me more details of your setup as I am quite experienced 
> with UML and now completely stuck with AMD64.
> 
> > Is your RAM OK?
> Oh yes, this has nothing to do with the hardware.
> 
> > Which kernels do you have inside and outside?
> Host (outside):
> 2.6.19.2-skas3-v8.2

Okay, that's one big difference.  I have a stock kernel (well,
gentoo-sources) on the outside, not a SKAS3 patched kernel.  Maybe that
makes a difference on amd64?

> Inside: pick any of those (none of them work with >=2.6.16):
> http://uml.nagafix.co.uk/
> 
> >  How are
> > you trying to build the 32-bit UMLs?
> These are the same as on the site above (which I maintain) and these 
> have worked flawlessly for a long long time.
> 
> I have downgraded the x86 boxes to 2.6.15.7 and these are up and running 
> again. But I can't do that for all of them, and this is just not an 
> option for some of the amd64 boxes.

My setup is:

Host boxes:
	- Dual dual-core opteron 265 with 6GB of RAM running 2.6.17-gentoo-r8
	- Turion laptop with 2GB of RAM running currently 2.6.20-rc5 (stock)
but most recently 2.6.19-ck1 (stock).
	- Athlon64 3000+ with 1GB of RAM running ck-sources-2.6.19_p2-r3
Notice, no UML related patches on the host boxes.

UML Boxes:
	- usermode-sources-2.6.16-r6 (2.6.16 with genpatches 15 and -bs2)
	- usermode-sources-2.6.18-r1 (2.6.18 with genpatches 8 and -bb2)
	- Modified usermode-sources-2.6.14-r6 (2.6.14 with -bs3 and networking
patches for work) (this one also runs on 32-bit hosts running various
gentoo kernels on workstations at work)

All of these run some form of Gentoo inside; not necessarily recent.
Each of them runs in both 32 and 64 bit versions. I have also briefly
run a UML with a fedora core 2 image, running a usermode-sources-2.6.18
kernel, on the opteron box, but that was only very briefly.  That's a
32-bit only UML.

Daniel

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 194 bytes --]

_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

>> Which kernels do you have inside and outside?
> Host (outside):
> 2.6.19.2-skas3-v8.2
Note: skas3 v9 has some problems, but I tried that too.

And I wouldn't blame the guest builds either. These guest kernels have 
worked for many people in the past, including me. And the image has not 
changed.

I've tried all the versions you can find on:
http://uml.nagafix.co.uk/kernels/
And some of Blaisorblade's kernels too (>2.6.15 as I need TLS)

Any ideas? Anyone?

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

>>> Which kernels do you have inside and outside?
>> Host (outside):
>> 2.6.19.2-skas3-v8.2
> 
> Okay, that's one big difference.  I have a stock kernel (well,
> gentoo-sources) on the outside, not a SKAS3 patched kernel.  Maybe that
> makes a difference on amd64?
I wouldn't think so, as it is always possible to disable skas3 (and in 
fact you have to disable it as /proc/mm mm64 isn't fully working on 
amd64) on the command line using skas0 or noprocmm, etc..
(Which I did)

>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and running 
>> again. But I can't do that for all of them, and this is just not an 
>> option for some of the amd64 boxes.
> 
> My setup is:
Thanks for that. That is very similar to mine.
I don't think this has anything to do with the guest... So I'll try to 
remove the skas3 patch from the host and see how it goes.

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and 
>>> running again. But I can't do that for all of them, and this is just 
>>> not an option for some of the amd64 boxes.
>>
>> My setup is:
> Thanks for that. That is very similar to mine.
> I don't think this has anything to do with the guest... So I'll try to 
> remove the skas3 patch from the host and see how it goes.
> 
I did, and no improvement... x86 guests still hang.
Could you post a binary guest kernel somewhere so I can try that?
(even if it isn't static - glibc should be similar since we're using 
Gentoo amd64)
If that still does not work then I can be certain that it is something 
to do with the host.

Thanks
Antoine

BTW, anyone know if UML guests are compatible with exec-shield?

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

Antoine Martin wrote:
>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and 
>>>> running again. But I can't do that for all of them, and this is just 
>>>> not an option for some of the amd64 boxes.
>>>
>>> My setup is:
>> Thanks for that. That is very similar to mine.
>> I don't think this has anything to do with the guest... So I'll try to 
>> remove the skas3 patch from the host and see how it goes.
>>
> I did, and no improvement... x86 guests still hang.
> Could you post a binary guest kernel somewhere so I can try that?
> (even if it isn't static - glibc should be similar since we're using 
> Gentoo amd64)
> If that still does not work then I can be certain that it is something 
> to do with the host.
I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date, 
kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
None of them work with any of the 32-bit kernels!
It prints nothing, just sits there spinning at 100% cpu.
So I am now totally convinced that i haven't got a weird setup.
Something else is broken in UML.

On fully up to date Fedora Core 6 x86_64, the kernel does display 
something before crashing:
# uname -a
Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34 
EST 2006 x86_64 x86_64 x86_64 GNU/Linux
# ./kernel32-2.6.19.2
Checking that ptrace can change system call numbers...OK
Checking syscall emulation patch for ptrace...missing
Checking for tmpfs mount on /dev/shm...OK
Checking PROT_EXEC mmap in /dev/shm/...OK
Checking for the skas3 patch in the host:
   - /proc/mm...not found
   - PTRACE_FAULTINFO...not found
   - PTRACE_LDT...not found
UML running in SKAS0 mode

[root@localhost home]#

This is 100% repeatable. Plain Fedora.
Many users will have a similar setup and will just give up on UML.
So I as I said before, UML is currently unusable for most people out 
there running fairly recent systems.

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Blaisorblade]

On Thursday 18 January 2007 00:26, Jeff Dike wrote:
> On Wed, Jan 17, 2007 at 05:15:35PM +0100, Blaisorblade wrote:
> > kjournald starting.  Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > VFS: Mounted root (ext3 filesystem) readonly.
> >
> > it hangs giving the following result at strace -p (I've printed two
> > consecutive iterations of the same messages to show that they are the
> > same):
>
> I'm chasing something on i386 with the same symptoms, but I think it's
> a different problem.  What I'm seeing is init segfaulting on some
> hosts, but not others.
>
> Figure out what the segfault is, and where it's happening.
I've started an attempt. I'm also compiling uml 2.6.16-bs3 - with gcc 3.4 
there is no problem, we'll see now with gcc 4.0.
All these tests are run on a custom 2.6.18.6 64-bit kernel, without SKAS (and 
with my RFP patches , but this won't make a difference).

Ok, I hope I remembered correctly how to debug such faults (I'm posting the 
full procedure so you can give a look)
(gdb) where
#0  userspace (regs=0x60a5cac8) 
at /home/paolo/Admin/kernel/6/VCS/linux-2.6.18/arch/um/os-Linux/skas/process.c:275
#1  0x0000000060010192 in new_thread_handler (sig=<value optimized out>) 
at /home/paolo/Admin/kernel/6/VCS/linux-2.6.18/arch/um/kernel/skas/process_kern.c:68
#2  <signal handler called>
#3  0x000000006017a829 in kill () at swab.h:135
#4  0x000000006001d7c9 in set_signals (enable=12139) 
at /home/paolo/Admin/kernel/6/VCS/linux-2.6.18/arch/um/os-Linux/signal.c:228
#5  0x00000000602a3330 in init_thread_union ()
#6  0x00000000602a34e0 in init_thread_union ()
#7  0x00000000600204a4 in new_thread (stack=Cannot access memory at address 
0xfffffffffffffe38
) 
at /home/paolo/Admin/kernel/6/VCS/linux-2.6.18/arch/um/os-Linux/skas/process.c:457
Previous frame inner to this frame (corrupt stack?)

(gdb) print/x regs->skas.regs[16]  	# HOST_IP
$22 = 0x4042f92f			# Always this one
(gdb) print pid
$25 = 12191

bash $ grep 4042f000 /proc/12191/maps
4042f000-40430000 r-xs 019a5000 00:13 
72548                              /tmp/vm_file-eTomUL (deleted)

Finally:
(gdb) print/x uml_physmem + 0x019a5000 + 0x92f
$24 = 0x619a592f
(that's uml_physmem, plus mmap offset from /proc/<child>/maps, + the offset 
inside the vma).

With disassemble I got:

0x00000000619a590f:     nop
0x00000000619a5910:     mov    $0x15,%rax		    # 21 = __NR_access on x86_64.
0x00000000619a5917:     syscall
0x00000000619a5919:     cmp    $0xfffffffffffff001,%rax	    # 
that's -4095, -MAX_ERRNO
0x00000000619a591f:     jae    0x619a5922
0x00000000619a5921:     retq
0x00000000619a5922:     mov    1549599(%rip),%rcx        # 0x61b1fe48
0x00000000619a5929:     xor    %rdx,%rdx
0x00000000619a592c:     sub    %rax,%rdx
0x00000000619a592f:     mov    %edx,%fs:(%rcx)  #faulting instruction.
0x00000000619a5932:     or     $0xffffffffffffffff,%rax
0x00000000619a5936:     jmp    0x619a5921

And there is also a caller:

0x00000000619a5940:     push   %rbx
0x00000000619a5941:     mov    %esi,%ebx
0x00000000619a5943:     sub    $0x90,%rsp
0x00000000619a594a:     mov    1549783(%rip),%rax        # 0x61b1ff28
0x00000000619a5951:     mov    (%rax),%edx
0x00000000619a5953:     test   %edx,%edx
0x00000000619a5955:     jne    0x619a5969
0x00000000619a5957:     callq  0x619a5910
0x00000000619a595c:     mov    %eax,%edx
0x00000000619a595e:     add    $0x90,%rsp
0x00000000619a5965:     mov    %edx,%eax
0x00000000619a5967:     pop    %rbx

This looks like part of the code emitted for __syscall_return, with %fs:$rcx 
seeming like a move into errno (i.e. that's actually glibc code).
This is from a Sarge-64 root_fs (the one from Antoine Martin).

RCX there is (long)regs->skas.regs[11] = -64, and for FS, since HOST_FS = 25, 
I get:

print/x regs->skas.regs[25]
$45 = 0x63

-- 
Inform me of my mistakes, so I can add them to my list!
Paolo Giarrusso, aka Blaisorblade
http://www.user-mode-linux.org/~blaisorblade
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Blaisorblade]

On Wednesday 17 January 2007 19:17, Christopher S. Aker wrote:
> Blaisorblade wrote:
> [snip]
>
> > Without any errors, after these messages:
> >
> > kjournald starting.  Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > VFS: Mounted root (ext3 filesystem) readonly.
> >
> > it hangs giving the following result at strace -p (I've printed two
> > consecutive iterations of the same messages to show that they are the
> > same):
> >
> > --- SIGCHLD (Child exited) @ 0 (0) ---
> > wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL)
> > = 31586
> > ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
> > ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
> > ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
> > --- SIGCHLD (Child exited) @ 0 (0) ---
> > wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL)
> > = 31586
> > ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
> > ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
> > ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
> >
> > --- SIGCHLD (Child exited) @ 0 (0) ---
> > wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSEGV}], WSTOPPED, NULL)
> > = 31586
> > ptrace(PTRACE_GETREGS, 31586, 0, 0x6096dac8) = 0
> > ptrace(PTRACE_GETFPREGS, 31586, 0, 0x6096dba0) = 0
> > ptrace(PTRACE_CONT, 31586, 0, SIGSEGV)  = 0
> > --- SIGCHLD (Child exited) @ 0 (0) ---
> > wait4(31586, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGUSR1}], WSTOPPED, NULL)
> > = 31586
> > ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
> > ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
> > ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
> >
> > I'll have to verify whether some code in the stubs is miscompiled. But
> > not until... well, I dunno when I'll be back...
> >
> > Anybody else with the same problem?
>
> Isn't this is the same problem we discussed a few months back?  What
> I've discovered since then is this is a regression introduced after
> 2.6.16 on the _host_.  Any post-2.6.16 host kernel, either skas v8.2 or
> v9.pre causes Ubuntu (and other distros, I believe) to hang after "VFS
> mounting root".
Not at all.

I'm running:

64bit host - 2.6.18 on the host, Ubuntu 6.06 LTS. It would use 2.6.15 as 
default kernel, however (which implies their glibc is compiled against it).

Without SKAS.

Guest - 32bit is all fine with Debian (my usual testcase)
- 64bit is fine only with gcc 3.4, with gcc 4.0 I get troubles.

Also, since now I don't have the time to read everything frequently, I start 
forgetting (I used to have a mental db of such problems, when I worked on 
them a lot). We should use http://bugzilla.kernel.org/.

Since both you and Antoine are hitting that same bug, I'm cc'ing both of you.
-- 
Inform me of my mistakes, so I can add them to my list!
Paolo Giarrusso, aka Blaisorblade
http://www.user-mode-linux.org/~blaisorblade
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Boaz Harrosh]

Antoine Martin wrote:
> Antoine Martin wrote:
>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and 
>>>>> running again. But I can't do that for all of them, and this is just 
>>>>> not an option for some of the amd64 boxes.
>>>> My setup is:
>>> Thanks for that. That is very similar to mine.
>>> I don't think this has anything to do with the guest... So I'll try to 
>>> remove the skas3 patch from the host and see how it goes.
>>>
>> I did, and no improvement... x86 guests still hang.
>> Could you post a binary guest kernel somewhere so I can try that?
>> (even if it isn't static - glibc should be similar since we're using 
>> Gentoo amd64)
>> If that still does not work then I can be certain that it is something 
>> to do with the host.
> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date, 
> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
> None of them work with any of the 32-bit kernels!
> It prints nothing, just sits there spinning at 100% cpu.
> So I am now totally convinced that i haven't got a weird setup.
> Something else is broken in UML.
> 
> On fully up to date Fedora Core 6 x86_64, the kernel does display 
> something before crashing:
> # uname -a
> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34 
> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
> # ./kernel32-2.6.19.2
> Checking that ptrace can change system call numbers...OK
> Checking syscall emulation patch for ptrace...missing
> Checking for tmpfs mount on /dev/shm...OK
> Checking PROT_EXEC mmap in /dev/shm/...OK
> Checking for the skas3 patch in the host:
>    - /proc/mm...not found
>    - PTRACE_FAULTINFO...not found
>    - PTRACE_LDT...not found
> UML running in SKAS0 mode
> 
> [root@localhost home]#
> 
> This is 100% repeatable. Plain Fedora.
> Many users will have a similar setup and will just give up on UML.
> So I as I said before, UML is currently unusable for most people out 
> there running fairly recent systems.
> 
> Antoine
> 
> _______________________________________________
> User-mode-linux-devel mailing list
> User-mode-linux-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
I have a 2.6.19, vanila kernel on top of redhat4, host.
And any kernel between 2.6.17 - 2.6.20-rc5 x86_64 for guests.
For my iSCSI tests they all run well.
At the very beginning, I had bad crashes and I solved it with plain gdb.
The point for us to use UML, from the begging, was to use gdb on our own kernel development.
At the end it was very easy to find that I have miss-configured the uml kernel, when that was fixed every thing
ran well.

for me I just do
#gdb um/vmlinux (was compiled with -O um)
gdb>run ubd0=/var/opt/FedoraCore5-AMD64-root_fs eth0=tuntap,,,192.168.0.117
after first trap in gdb
gdb>handle SIGUSR1 pass nostop noprint
from than on its strait gdb, tell me if you need a script for loading symbols of kernel modules.

Free Life
Boaz


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

>> On fully up to date Fedora Core 6 x86_64, the kernel does display 
>> something before crashing:
>> # uname -a
>> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34 
>> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
>> # ./kernel32-2.6.19.2
>> Checking that ptrace can change system call numbers...OK
>> Checking syscall emulation patch for ptrace...missing
>> Checking for tmpfs mount on /dev/shm...OK
>> Checking PROT_EXEC mmap in /dev/shm/...OK
>> Checking for the skas3 patch in the host:
>>    - /proc/mm...not found
>>    - PTRACE_FAULTINFO...not found
>>    - PTRACE_LDT...not found
>> UML running in SKAS0 mode
>>
>> [root@localhost home]#
>>
>> This is 100% repeatable. Plain Fedora.
>> Many users will have a similar setup and will just give up on UML.
>> So I as I said before, UML is currently unusable for most people out 
>> there running fairly recent systems.
> I have a 2.6.19, vanila kernel on top of redhat4, host.
There is one major difference in this case, redhat4 uses glibc 2.3 
whereas fc6 (and gentoo-current) use glibc 2.4
A lot of the problems that I am reporting started when glibc was 
upgraded (sorry I forgot to mention that)


> And any kernel between 2.6.17 - 2.6.20-rc5 x86_64 for guests.
> For my iSCSI tests they all run well.
> At the very beginning, I had bad crashes and I solved it with plain gdb.
> The point for us to use UML, from the begging, was to use gdb on our own kernel development.
> At the end it was very easy to find that I have miss-configured the uml kernel, when that was fixed every thing
> ran well.
> 
> for me I just do
> #gdb um/vmlinux (was compiled with -O um)
> gdb>run ubd0=/var/opt/FedoraCore5-AMD64-root_fs eth0=tuntap,,,192.168.0.117
> after first trap in gdb
> gdb>handle SIGUSR1 pass nostop noprint
> from than on its strait gdb, tell me if you need a script for loading symbols of kernel modules.
That would be great, it could go on the wiki too.

Thanks
Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Joel Palmius]

Confirmed on my athlon64 gentoo setup. I've been running 2.6.14.3 as host 
kernel for ages (since I was too wimpy to try to upgrade a host kernel 
remote on a machine that required binary proprietary drivers).

On 2.6.14.3 x86_64 all my 32bit UMLs run fine with various guest kernels 
compiled in various circumstances.

On 2.6.18-gentoo-r6 x86_64 (genkernel), all guest UMLs spin up to 100% and 
does nothing, no output whatsoever.

Strace says:

execve("./vmlinux", ["./vmlinux"], [/* 28 vars */]) = 0
[ Process PID=13658 runs in 32 bit mode. ]
uname({sys="Linux", node="master", ...}) = 0
brk(0)                                  = 0xffffffffa0314000
brk(0xa0314844)                         = 0xffffffffa0314844
set_thread_area(0xffdb51d0)             = 0
brk(0xa0335844)                         = 0xffffffffa0335844
brk(0xa0336000)                         = 0xffffffffa0336000
getrlimit(RLIMIT_STACK, {rlim_cur=-4286578688, rlim_max=4292563436}) = 0
rt_sigaction(SIGINT, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [INT], NULL, 8) = 0
rt_sigaction(SIGTERM, {0xc0000000a001cad8, [],
SA_INTERRUPT|SA_ONESHOT|0x161e48}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [TERM], NULL, 8) = 0
rt_sigaction(SIGHUP, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
fstat64(0x1, 0xffdb4ad8)                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0x1000) = 0xfffffffff7fe8000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) = 0xfffffffff7fe7000
clone(child_stack=0xf7fe7fd4, flags=|SIGCHLD) = 13659
--- SIGCHLD (Child exited) @ 0 (0) ---
waitpid(13659, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSTOP}], WSTOPPED) =
13659
ptrace(0x15 /* PTRACE_??? */, 13659, 0, 0x1) = -1 EINVAL (Invalid
argument)


Pity... I had finally decided to upgrade the host kernel... :-)

   // Joel


On Fri, 19 Jan 2007, Antoine Martin wrote:

> Antoine Martin wrote:
>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and
>>>>> running again. But I can't do that for all of them, and this is just
>>>>> not an option for some of the amd64 boxes.
>>>>
>>>> My setup is:
>>> Thanks for that. That is very similar to mine.
>>> I don't think this has anything to do with the guest... So I'll try to
>>> remove the skas3 patch from the host and see how it goes.
>>>
>> I did, and no improvement... x86 guests still hang.
>> Could you post a binary guest kernel somewhere so I can try that?
>> (even if it isn't static - glibc should be similar since we're using
>> Gentoo amd64)
>> If that still does not work then I can be certain that it is something
>> to do with the host.
> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date,
> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
> None of them work with any of the 32-bit kernels!
> It prints nothing, just sits there spinning at 100% cpu.
> So I am now totally convinced that i haven't got a weird setup.
> Something else is broken in UML.
>
> On fully up to date Fedora Core 6 x86_64, the kernel does display
> something before crashing:
> # uname -a
> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34
> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
> # ./kernel32-2.6.19.2
> Checking that ptrace can change system call numbers...OK
> Checking syscall emulation patch for ptrace...missing
> Checking for tmpfs mount on /dev/shm...OK
> Checking PROT_EXEC mmap in /dev/shm/...OK
> Checking for the skas3 patch in the host:
>   - /proc/mm...not found
>   - PTRACE_FAULTINFO...not found
>   - PTRACE_LDT...not found
> UML running in SKAS0 mode
>
> [root@localhost home]#
>
> This is 100% repeatable. Plain Fedora.
> Many users will have a similar setup and will just give up on UML.
> So I as I said before, UML is currently unusable for most people out
> there running fairly recent systems.
>
> Antoine
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> User-mode-linux-devel mailing list
> User-mode-linux-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

Joel Palmius wrote:
> Confirmed on my athlon64 gentoo setup. I've been running 2.6.14.3 as 
> host kernel for ages (since I was too wimpy to try to upgrade a host 
> kernel remote on a machine that required binary proprietary drivers).
> 
> On 2.6.14.3 x86_64 all my 32bit UMLs run fine with various guest kernels 
> compiled in various circumstances.
on x86 I was able to upgrade as far as 2.6.15.x, 2.6.16 and later broke.
So you may be able to upgrade by one minor release (not much - and 
2.6.15 is no longer maintained, whereas 2.6.16 is... damn)

> On 2.6.18-gentoo-r6 x86_64 (genkernel), all guest UMLs spin up to 100% 
> and does nothing, no output whatsoever.
Finally someone confirms what I have been seeing for ages!
Maybe the devs can find out what is going on now...

It does look like a host kernel issue, but since other people are 
reporting no errors with the same kernels, I wouldn't completely discard 
the possibility that glibc has something to do with this.
Also, there was a report today that *_FS_SECURITY is causing problems.
Do you happen to have *_FS_SECURITY options switched on (on the host)?

Antoine




> Strace says:
> 
> execve("./vmlinux", ["./vmlinux"], [/* 28 vars */]) = 0
> [ Process PID=13658 runs in 32 bit mode. ]
> uname({sys="Linux", node="master", ...}) = 0
> brk(0)                                  = 0xffffffffa0314000
> brk(0xa0314844)                         = 0xffffffffa0314844
> set_thread_area(0xffdb51d0)             = 0
> brk(0xa0335844)                         = 0xffffffffa0335844
> brk(0xa0336000)                         = 0xffffffffa0336000
> getrlimit(RLIMIT_STACK, {rlim_cur=-4286578688, rlim_max=4292563436}) = 0
> rt_sigaction(SIGINT, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [INT], NULL, 8) = 0
> rt_sigaction(SIGTERM, {0xc0000000a001cad8, [],
> SA_INTERRUPT|SA_ONESHOT|0x161e48}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [TERM], NULL, 8) = 0
> rt_sigaction(SIGHUP, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
> rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
> fstat64(0x1, 0xffdb4ad8)                = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0x1000) = 0xfffffffff7fe8000
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) = 0xfffffffff7fe7000
> clone(child_stack=0xf7fe7fd4, flags=|SIGCHLD) = 13659
> --- SIGCHLD (Child exited) @ 0 (0) ---
> waitpid(13659, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSTOP}], WSTOPPED) =
> 13659
> ptrace(0x15 /* PTRACE_??? */, 13659, 0, 0x1) = -1 EINVAL (Invalid
> argument)
> 
> 
> Pity... I had finally decided to upgrade the host kernel... :-)
> 
>   // Joel
> 
> 
> On Fri, 19 Jan 2007, Antoine Martin wrote:
> 
>> Antoine Martin wrote:
>>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and
>>>>>> running again. But I can't do that for all of them, and this is just
>>>>>> not an option for some of the amd64 boxes.
>>>>>
>>>>> My setup is:
>>>> Thanks for that. That is very similar to mine.
>>>> I don't think this has anything to do with the guest... So I'll try to
>>>> remove the skas3 patch from the host and see how it goes.
>>>>
>>> I did, and no improvement... x86 guests still hang.
>>> Could you post a binary guest kernel somewhere so I can try that?
>>> (even if it isn't static - glibc should be similar since we're using
>>> Gentoo amd64)
>>> If that still does not work then I can be certain that it is something
>>> to do with the host.
>> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date,
>> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
>> None of them work with any of the 32-bit kernels!
>> It prints nothing, just sits there spinning at 100% cpu.
>> So I am now totally convinced that i haven't got a weird setup.
>> Something else is broken in UML.
>>
>> On fully up to date Fedora Core 6 x86_64, the kernel does display
>> something before crashing:
>> # uname -a
>> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34
>> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
>> # ./kernel32-2.6.19.2
>> Checking that ptrace can change system call numbers...OK
>> Checking syscall emulation patch for ptrace...missing
>> Checking for tmpfs mount on /dev/shm...OK
>> Checking PROT_EXEC mmap in /dev/shm/...OK
>> Checking for the skas3 patch in the host:
>>   - /proc/mm...not found
>>   - PTRACE_FAULTINFO...not found
>>   - PTRACE_LDT...not found
>> UML running in SKAS0 mode
>>
>> [root@localhost home]#
>>
>> This is 100% repeatable. Plain Fedora.
>> Many users will have a similar setup and will just give up on UML.
>> So I as I said before, UML is currently unusable for most people out
>> there running fairly recent systems.
>>
>> Antoine
>>
>> -------------------------------------------------------------------------
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to 
>> share your
>> opinions on IT & business topics through brief surveys - and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> _______________________________________________
>> User-mode-linux-devel mailing list
>> User-mode-linux-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>>
> 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Joel Palmius]

master linux-2.6.18-gentoo-r6 # grep -i security .config
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_SECURITY=y
# Security options
# CONFIG_SECURITY is not set
master linux-2.6.18-gentoo-r6 # cd ..
master src # cd linux-2.6.14.3/
master linux-2.6.14.3 # grep -i security .config
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_XFS_SECURITY is not set
# Security options
# CONFIG_SECURITY is not set
master linux-2.6.14.3 #

Hrm.. Interesting.. I'll tinker with this and see what happens.

   // Joel


On Sun, 21 Jan 2007, Antoine Martin wrote:

> Joel Palmius wrote:
>> Confirmed on my athlon64 gentoo setup. I've been running 2.6.14.3 as
>> host kernel for ages (since I was too wimpy to try to upgrade a host
>> kernel remote on a machine that required binary proprietary drivers).
>>
>> On 2.6.14.3 x86_64 all my 32bit UMLs run fine with various guest kernels
>> compiled in various circumstances.
> on x86 I was able to upgrade as far as 2.6.15.x, 2.6.16 and later broke.
> So you may be able to upgrade by one minor release (not much - and
> 2.6.15 is no longer maintained, whereas 2.6.16 is... damn)
>
>> On 2.6.18-gentoo-r6 x86_64 (genkernel), all guest UMLs spin up to 100%
>> and does nothing, no output whatsoever.
> Finally someone confirms what I have been seeing for ages!
> Maybe the devs can find out what is going on now...
>
> It does look like a host kernel issue, but since other people are
> reporting no errors with the same kernels, I wouldn't completely discard
> the possibility that glibc has something to do with this.
> Also, there was a report today that *_FS_SECURITY is causing problems.
> Do you happen to have *_FS_SECURITY options switched on (on the host)?
>
> Antoine
>
>
>
>
>> Strace says:
>>
>> execve("./vmlinux", ["./vmlinux"], [/* 28 vars */]) = 0
>> [ Process PID=13658 runs in 32 bit mode. ]
>> uname({sys="Linux", node="master", ...}) = 0
>> brk(0)                                  = 0xffffffffa0314000
>> brk(0xa0314844)                         = 0xffffffffa0314844
>> set_thread_area(0xffdb51d0)             = 0
>> brk(0xa0335844)                         = 0xffffffffa0335844
>> brk(0xa0336000)                         = 0xffffffffa0336000
>> getrlimit(RLIMIT_STACK, {rlim_cur=-4286578688, rlim_max=4292563436}) = 0
>> rt_sigaction(SIGINT, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [INT], NULL, 8) = 0
>> rt_sigaction(SIGTERM, {0xc0000000a001cad8, [],
>> SA_INTERRUPT|SA_ONESHOT|0x161e48}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [TERM], NULL, 8) = 0
>> rt_sigaction(SIGHUP, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
>> fstat64(0x1, 0xffdb4ad8)                = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0x1000) = 0xfffffffff7fe8000
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
>> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) = 0xfffffffff7fe7000
>> clone(child_stack=0xf7fe7fd4, flags=|SIGCHLD) = 13659
>> --- SIGCHLD (Child exited) @ 0 (0) ---
>> waitpid(13659, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSTOP}], WSTOPPED) =
>> 13659
>> ptrace(0x15 /* PTRACE_??? */, 13659, 0, 0x1) = -1 EINVAL (Invalid
>> argument)
>>
>>
>> Pity... I had finally decided to upgrade the host kernel... :-)
>>
>>   // Joel
>>
>>
>> On Fri, 19 Jan 2007, Antoine Martin wrote:
>>
>>> Antoine Martin wrote:
>>>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and
>>>>>>> running again. But I can't do that for all of them, and this is just
>>>>>>> not an option for some of the amd64 boxes.
>>>>>>
>>>>>> My setup is:
>>>>> Thanks for that. That is very similar to mine.
>>>>> I don't think this has anything to do with the guest... So I'll try to
>>>>> remove the skas3 patch from the host and see how it goes.
>>>>>
>>>> I did, and no improvement... x86 guests still hang.
>>>> Could you post a binary guest kernel somewhere so I can try that?
>>>> (even if it isn't static - glibc should be similar since we're using
>>>> Gentoo amd64)
>>>> If that still does not work then I can be certain that it is something
>>>> to do with the host.
>>> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date,
>>> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
>>> None of them work with any of the 32-bit kernels!
>>> It prints nothing, just sits there spinning at 100% cpu.
>>> So I am now totally convinced that i haven't got a weird setup.
>>> Something else is broken in UML.
>>>
>>> On fully up to date Fedora Core 6 x86_64, the kernel does display
>>> something before crashing:
>>> # uname -a
>>> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34
>>> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
>>> # ./kernel32-2.6.19.2
>>> Checking that ptrace can change system call numbers...OK
>>> Checking syscall emulation patch for ptrace...missing
>>> Checking for tmpfs mount on /dev/shm...OK
>>> Checking PROT_EXEC mmap in /dev/shm/...OK
>>> Checking for the skas3 patch in the host:
>>>   - /proc/mm...not found
>>>   - PTRACE_FAULTINFO...not found
>>>   - PTRACE_LDT...not found
>>> UML running in SKAS0 mode
>>>
>>> [root@localhost home]#
>>>
>>> This is 100% repeatable. Plain Fedora.
>>> Many users will have a similar setup and will just give up on UML.
>>> So I as I said before, UML is currently unusable for most people out
>>> there running fairly recent systems.
>>>
>>> Antoine
>>>
>>> -------------------------------------------------------------------------
>>> Take Surveys. Earn Cash. Influence the Future of IT
>>> Join SourceForge.net's Techsay panel and you'll get the chance to
>>> share your
>>> opinions on IT & business topics through brief surveys - and earn cash
>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>> _______________________________________________
>>> User-mode-linux-devel mailing list
>>> User-mode-linux-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>>>
>>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> User-mode-linux-devel mailing list
> User-mode-linux-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Joel Palmius]

I tested a (host) kernel build without the *_FS_SECURITY thingies, but 
with same result. I guess the problem is something else.

   // Joel


On Sun, 21 Jan 2007, Antoine Martin wrote:

> Joel Palmius wrote:
>> Confirmed on my athlon64 gentoo setup. I've been running 2.6.14.3 as
>> host kernel for ages (since I was too wimpy to try to upgrade a host
>> kernel remote on a machine that required binary proprietary drivers).
>>
>> On 2.6.14.3 x86_64 all my 32bit UMLs run fine with various guest kernels
>> compiled in various circumstances.
> on x86 I was able to upgrade as far as 2.6.15.x, 2.6.16 and later broke.
> So you may be able to upgrade by one minor release (not much - and
> 2.6.15 is no longer maintained, whereas 2.6.16 is... damn)
>
>> On 2.6.18-gentoo-r6 x86_64 (genkernel), all guest UMLs spin up to 100%
>> and does nothing, no output whatsoever.
> Finally someone confirms what I have been seeing for ages!
> Maybe the devs can find out what is going on now...
>
> It does look like a host kernel issue, but since other people are
> reporting no errors with the same kernels, I wouldn't completely discard
> the possibility that glibc has something to do with this.
> Also, there was a report today that *_FS_SECURITY is causing problems.
> Do you happen to have *_FS_SECURITY options switched on (on the host)?
>
> Antoine
>
>
>
>
>> Strace says:
>>
>> execve("./vmlinux", ["./vmlinux"], [/* 28 vars */]) = 0
>> [ Process PID=13658 runs in 32 bit mode. ]
>> uname({sys="Linux", node="master", ...}) = 0
>> brk(0)                                  = 0xffffffffa0314000
>> brk(0xa0314844)                         = 0xffffffffa0314844
>> set_thread_area(0xffdb51d0)             = 0
>> brk(0xa0335844)                         = 0xffffffffa0335844
>> brk(0xa0336000)                         = 0xffffffffa0336000
>> getrlimit(RLIMIT_STACK, {rlim_cur=-4286578688, rlim_max=4292563436}) = 0
>> rt_sigaction(SIGINT, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [INT], NULL, 8) = 0
>> rt_sigaction(SIGTERM, {0xc0000000a001cad8, [],
>> SA_INTERRUPT|SA_ONESHOT|0x161e48}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [TERM], NULL, 8) = 0
>> rt_sigaction(SIGHUP, {0xc0000000a001cad8, [], 0}, NULL, 8) = 0
>> rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
>> fstat64(0x1, 0xffdb4ad8)                = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0x1000) = 0xfffffffff7fe8000
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
>> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) = 0xfffffffff7fe7000
>> clone(child_stack=0xf7fe7fd4, flags=|SIGCHLD) = 13659
>> --- SIGCHLD (Child exited) @ 0 (0) ---
>> waitpid(13659, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGSTOP}], WSTOPPED) =
>> 13659
>> ptrace(0x15 /* PTRACE_??? */, 13659, 0, 0x1) = -1 EINVAL (Invalid
>> argument)
>>
>>
>> Pity... I had finally decided to upgrade the host kernel... :-)
>>
>>   // Joel
>>
>>
>> On Fri, 19 Jan 2007, Antoine Martin wrote:
>>
>>> Antoine Martin wrote:
>>>>>>> I have downgraded the x86 boxes to 2.6.15.7 and these are up and
>>>>>>> running again. But I can't do that for all of them, and this is just
>>>>>>> not an option for some of the amd64 boxes.
>>>>>>
>>>>>> My setup is:
>>>>> Thanks for that. That is very similar to mine.
>>>>> I don't think this has anything to do with the guest... So I'll try to
>>>>> remove the skas3 patch from the host and see how it goes.
>>>>>
>>>> I did, and no improvement... x86 guests still hang.
>>>> Could you post a binary guest kernel somewhere so I can try that?
>>>> (even if it isn't static - glibc should be similar since we're using
>>>> Gentoo amd64)
>>>> If that still does not work then I can be certain that it is something
>>>> to do with the host.
>>> I've just tried on 3 more hosts, all AMD64 Gentoo fully up to date,
>>> kernel 2.6.19.2. No skas, no exec shield, no selinux, plain kernel.org:
>>> None of them work with any of the 32-bit kernels!
>>> It prints nothing, just sits there spinning at 100% cpu.
>>> So I am now totally convinced that i haven't got a weird setup.
>>> Something else is broken in UML.
>>>
>>> On fully up to date Fedora Core 6 x86_64, the kernel does display
>>> something before crashing:
>>> # uname -a
>>> Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:34
>>> EST 2006 x86_64 x86_64 x86_64 GNU/Linux
>>> # ./kernel32-2.6.19.2
>>> Checking that ptrace can change system call numbers...OK
>>> Checking syscall emulation patch for ptrace...missing
>>> Checking for tmpfs mount on /dev/shm...OK
>>> Checking PROT_EXEC mmap in /dev/shm/...OK
>>> Checking for the skas3 patch in the host:
>>>   - /proc/mm...not found
>>>   - PTRACE_FAULTINFO...not found
>>>   - PTRACE_LDT...not found
>>> UML running in SKAS0 mode
>>>
>>> [root@localhost home]#
>>>
>>> This is 100% repeatable. Plain Fedora.
>>> Many users will have a similar setup and will just give up on UML.
>>> So I as I said before, UML is currently unusable for most people out
>>> there running fairly recent systems.
>>>
>>> Antoine
>>>
>>> -------------------------------------------------------------------------
>>> Take Surveys. Earn Cash. Influence the Future of IT
>>> Join SourceForge.net's Techsay panel and you'll get the chance to
>>> share your
>>> opinions on IT & business topics through brief surveys - and earn cash
>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>> _______________________________________________
>>> User-mode-linux-devel mailing list
>>> User-mode-linux-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>>>
>>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> User-mode-linux-devel mailing list
> User-mode-linux-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
>

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Jeff Dike]

On Sat, Jan 20, 2007 at 12:18:30AM +0100, Blaisorblade wrote:
> Ok, I hope I remembered correctly how to debug such faults (I'm posting the 
> full procedure so you can give a look)

Correct.

> 0x00000000619a592f:     mov    %edx,%fs:(%rcx)  #faulting instruction.

This and the registers involved are usually all you need.

> RCX there is (long)regs->skas.regs[11] = -64, and for FS, since HOST_FS = 25,
> I get:
> 
> print/x regs->skas.regs[25]
> $45 = 0x63

The presence of %fs in the instruction immediately suggests a TLS problem.

Also, the trap number in cases like this should be 13, rather than the
14 you get with a normal page fault.

%fs isn't 0, so that's one thing that's not wrong.  What's in the
corresponding segment?

-- 
Work email - jdike at linux dot intel dot com

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Jeff Dike]

On Sun, Jan 21, 2007 at 02:46:12PM +0000, Antoine Martin wrote:
> Finally someone confirms what I have been seeing for ages!
> Maybe the devs can find out what is going on now...

OK, can someone give me access to a box where this is happening?

				Jeff

-- 
Work email - jdike at linux dot intel dot com

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Antoine Martin]

Jeff Dike wrote:
> On Sun, Jan 21, 2007 at 02:46:12PM +0000, Antoine Martin wrote:
>> Finally someone confirms what I have been seeing for ages!
>> Maybe the devs can find out what is going on now...
> 
> OK, can someone give me access to a box where this is happening?
Sure thing.
Just let me know when you want to access it and I'll make sure it is 
available. Also send me your public key and I'll give you ssh root.

Antoine

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Blaisorblade]

On Monday 22 January 2007 21:59, Jeff Dike wrote:
> On Sat, Jan 20, 2007 at 12:18:30AM +0100, Blaisorblade wrote:
> > Ok, I hope I remembered correctly how to debug such faults (I'm posting
> > the full procedure so you can give a look)
>
> Correct.
>
> > 0x00000000619a592f:     mov    %edx,%fs:(%rcx)  #faulting instruction.
>
> This and the registers involved are usually all you need.
>
> > RCX there is (long)regs->skas.regs[11] = -64, and for FS, since HOST_FS =
> > 25, I get:
> >
> > print/x regs->skas.regs[25]
> > $45 = 0x63
Since include/asm-x86_64/segment.h has:
#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)
(which gives 0x63), this is the default value, ok.

> The presence of %fs in the instruction immediately suggests a TLS problem.
Yes, but the problem depends on miscompilation of UML (or rather, on using a 
different compiler), and arch_prctl_skas does not do a lot of work on x86_64 
(for what I can see). I'm astonished by the fact that less users complain 
about TLS on amd64 than on x86 (there are much less users, ok, but the 
difference is too high).

> Also, the trap number in cases like this should be 13, rather than the
> 14 you get with a normal page fault.

I remember that I saw 14 there, indeed. And indeed, it is so. See below:

(gdb) print regs->skas
$5 = {regs = {1, 547608288328, 547608288344, 4294967295, 547608288096, 
1077341640, 514, 0, 3399988123389603631, 18374403900871474943, 
18446744073709551614, 18446744073709551552, 2,
    0, 1076283584, 18446744073709551615, 1078130991, 51, 66067, 547608288008, 
43, 0, 0, 0, 0, 99, 0}, fp = {895, 0, 0, 281470681751424, 0 <repeats 60 
times>, 140733672859384},
  faultinfo = {error_code = 6, cr2 = 1613887512, trap_no = 14}, syscall = -1, 
is_user = 1}
(gdb) print/x regs->skas
$7 = {regs = {0x1, 0x7f7fff5c48, 0x7f7fff5c58, 0xffffffff, 0x7f7fff5b60, 
0x4036edc8, 0x202, 0x0, 0x2f2f2f2f2f2f2f2f, 0xfefefefefefefeff, 
0xfffffffffffffffe, 0xffffffffffffffc0,
    0x2, 0x0, 0x4026c8c0, 0xffffffffffffffff, 0x4042f92f, 0x33, 0x10213, 
0x7f7fff5b08, 0x2b, 0x0, 0x0, 0x0, 0x0, 0x63, 0x0}, fp = {0x37f, 0x0, 0x0, 
0xffff00001f80,
    0x0 <repeats 60 times>, 0x7fff1c9426f8}, faultinfo = {error_code = 0x6, 
cr2 = 0x6031f818, trap_no = 0xe}, syscall = 0xffffffffffffffff, is_user = 
0x1}

Then, new things:
(gdb) print $rsp
$9 = (void *) 0x60a23da0

> %fs isn't 0, so that's one thing that's not wrong.  What's in the
> corresponding segment?

regs[FS_BASE,GS_BASE] are both 0.
Instead, from strace I can see that
brk(0)                                  = 0x6031f000
brk(0x6031f880)                         = 0x6031f880
arch_prctl(ARCH_SET_FS, 0x6031f858)     = 0
is called at UML boot, very early, by glibc.

All of 4 runs have the same address in this call (no randomization on this? 
Strange!).

On the working binary, instead, this is what I get:
brk(0)                                  = 0x6031b000
brk(0x6031b880)                         = 0x6031b880 # malloc?
arch_prctl(ARCH_SET_FS, 0x6031b858)     = 0 #use the result, with some offset.

I do not think the exact address makes a difference (it will likely depend on 
the binary size).

I'll give a better look at some later time. Bye!
-- 
Inform me of my mistakes, so I can add them to my list!
Paolo Giarrusso, aka Blaisorblade
http://www.user-mode-linux.org/~blaisorblade
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] buggy UML AMD64?

[Boaz Harrosh]

[-- Attachment #1: Type: text/plain, Size: 1052 bytes --]

Antoine Martin wrote:
>> for me I just do
>> #gdb um/vmlinux (was compiled with -O um)
>> gdb>run ubd0=/var/opt/FedoraCore5-AMD64-root_fs eth0=tuntap,,,192.168.0.117
>> after first trap in gdb
>> gdb>handle SIGUSR1 pass nostop noprint
>> from than on its strait gdb, tell me if you need a script for loading symbols of kernel modules.
>
> That would be great, it could go on the wiki too.
> 
> Thanks
> Antoine

Attach is a script that works for both uml running in gdb or for kgdb.
Usage: add-symbol-file module

Where module can be just the mod_name or mod_name.ko or a full-path

What you do is ssh into a running uml, after the module was loaded by the uml, and run the script.
The printed message is what you need to paste at the gdb command-line. (the first chance you get)
Note that the path echoed is relative to the uml root. You might need to adjust it for gdb since
gdb will see the host path. If the module is inside the root_fs file than you will need to point
gdb to a copy of the module file on the host.

I hope that helps
Boaz Harrosh

[-- Attachment #2: add-symbol-file --]
[-- Type: text/plain, Size: 1669 bytes --]

#!/bin/sh
#
# Print gdb command to load a module's symbols
#
# Copyright (C) 2006 Panasas, Inc.  All rights reserved.
# Copyright (C) 2006 Benny Halevy
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# Usage: add-symbol-file module
#   module can be either the module name or path to the module object.
#
# Note: When used in UML, this script must run in UML's context in order
#       to access /sys/module/$mod/sections/.* to get the dynamic relocation
#       addresses but the module path must be valid in gdb's context so that
#       gdb can load the object.
#
progname=`basename $0`
mod=$1
if [ "$mod" = "" ]; then
	echo Usage: `$progname` module 1>&2
	exit 1
fi
if [[ -e "$mod" || "$mod" == */* ]]; then
	obj="$mod"
else
	rel=`uname -r`
	modpath="/lib/modules/$rel/kernel"
	obj=`find $modpath -name "$mod" -o -name "$mod.ko" -o -name "$mod.o" | head -1`
	if [ ! -e "$obj" ]; then
		echo "$progname: $mod was not found in $modpath" 1>&2
		exit 1
	fi
fi
mod=`basename $mod | sed 's/\..*o$//'`
dir=/sys/module/$mod/sections
if [ ! -d $dir ]; then
	echo "$progname: $dir not found" 1>&2
	exit 1
fi

s="`cat $dir/.text`"
for i in .rodata .data .bss; do
	s="$s -s $i `cat $dir/$i`"
done

echo "add-symbol-file $obj $s"

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 194 bytes --]

_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

Re: [uml-devel] UML/64bit is miscompiled by gcc 4.0.3 on Ubuntu 6.06 LTS

[Blaisorblade]

On Wednesday 17 January 2007 19:15, Antoine Martin wrote:
> >> ptrace(PTRACE_SETREGS, 31586, 0, 0x6096dac8) = 0
> >> ptrace(PTRACE_SETFPREGS, 31586, 0, 0x6096dba0) = 0
> >> ptrace(PTRACE_SYSCALL, 31586, 0, SIG_0) = 0
> >>
> >> I'll have to verify whether some code in the stubs is miscompiled. But
> >> not until... well, I dunno when I'll be back...
> >>
> >> Anybody else with the same problem?
> >
> > Isn't this is the same problem we discussed a few months back?  What
> > I've discovered since then is this is a regression introduced after
> > 2.6.16 on the _host_.  Any post-2.6.16 host kernel, either skas v8.2 or
> > v9.pre causes Ubuntu (and other distros, I believe) to hang after "VFS
> > mounting root".

> > http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116008558424368&w
> >=2
> > http://marc.theaimsgroup.com/?l=user-mode-linux-devel&m=116711159414443&w
> >=2
>
> Indeed it is.
>
> A fix would be more than welcome. (2.6.16 is a bit dated)
> I believe a lot of users are hitting this bug now too (and it is a
> regression) as a lot of distros ship recent kernels.

> Another regression in 2.6.16 (or later?) is the inability to run 32-bit
> guests on 64-bit hosts (the same binaries that used to work before -
> statically compiled). The boot stops very early during the "checking
> ptrace" step.

Just fixed such a regression in 2.6.18 - patch is 'x86_64: fix 2.6.18 
regression - PTRACE_OLDSETOPTIONS should be accepted'. Actually, Jeff 
discovered the same bug today, like me! Please test it to make sure there are 
no further bugs.

For the other bug, could you, Antoine and Christopher, open an entry in 
bugzilla? Going through emails is becoming confusing...

Bye
-- 
Inform me of my mistakes, so I can add them to my list!
Paolo Giarrusso, aka Blaisorblade
http://www.user-mode-linux.org/~blaisorblade
Chiacchiera con i tuoi amici in tempo reale! 
 http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel