Re: serial flow control appears broken

[Robert Hancock <hancockr@shaw.ca>]

Mark Lord wrote:
>> I think that PIO transfers only have to be done with interrupts 
>> disabled on really old, evil controllers (without unmask set). I don't 
>> think libata ever disables interrupts during transfers(?)
> 
> That's what "hdparm -u1" (or -u0) controls.
> 
> But it doesn't matter a whit here.  The problem is that the IDE interrupt
> handling can take a long time, regardless of whether it unmasks IRQs or 
> not.
> And if that IDE interrupt interrupts a serial interrupt, then the serial
> stuff won't get handled until the IDE stuff completes.  Thus the problem.
> 
> The "fix" could be to have the serial IRQ handler never unmask interrupts,
> but that's a bit unsociable to others.  The IDE stuff really needs to not
> do so much during the actual IRQ handler.
> 
> Ingo's RT patches would probably fix all of this.

libata also doesn't do the actual PIO transfer from the interrupt 
handler like old IDE does, either, and it only disables interrupts for 
the transfer if it's transferring to/from high memory..

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/